------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- G N A T . C O M M A N D _ L I N E -- -- -- -- S p e c -- -- -- -- Copyright (C) 1999-2024, AdaCore -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. -- -- -- -- As a special exception under Section 7 of GPL version 3, you are granted -- -- additional permissions described in the GCC Runtime Library Exception, -- -- version 3.1, as published by the Free Software Foundation. -- -- -- -- You should have received a copy of the GNU General Public License and -- -- a copy of the GCC Runtime Library Exception along with this program; -- -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -- -- . -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ -- High level package for command line parsing and manipulation ---------------------------------------- -- Simple Parsing of the Command Line -- ---------------------------------------- -- This package provides an interface for parsing command line arguments, -- when they are either read from Ada.Command_Line or read from a string list. -- As shown in the example below, one should first retrieve the switches -- (special command line arguments starting with '-' by default) and their -- parameters, and then the rest of the command line arguments. -- -- While it may appear easy to parse the command line arguments with -- Ada.Command_Line, there are in fact lots of special cases to handle in some -- applications. Those are fully managed by GNAT.Command_Line. Among these are -- switches with optional parameters, grouping switches (for instance "-ab" -- might mean the same as "-a -b"), various characters to separate a switch -- and its parameter (or none: "-a 1" and "-a1" are generally the same, which -- can introduce confusion with grouped switches),... -- -- begin -- loop -- case Getopt ("a b: ad") is -- Accepts '-a', '-ad', or '-b argument' -- when ASCII.NUL => exit; -- when 'a' => -- if Full_Switch = "a" then -- Put_Line ("Got a"); -- else -- Put_Line ("Got ad"); -- end if; -- when 'b' => Put_Line ("Got b + " & Parameter); -- when others => -- raise Program_Error; -- cannot occur -- end case; -- end loop; -- loop -- declare -- S : constant String := Get_Argument (Do_Expansion => True); -- begin -- exit when S'Length = 0; -- Put_Line ("Got " & S); -- end; -- end loop; -- exception -- when Invalid_Switch => Put_Line ("Invalid Switch " & Full_Switch); -- when Invalid_Parameter => Put_Line ("No parameter for " & Full_Switch); -- end; -------------- -- Sections -- -------------- -- A more complicated example would involve the use of sections for the -- switches, as for instance in gnatmake. The same command line is used to -- provide switches for several tools. Each tool recognizes its switches by -- separating them with special switches that act as section separators. -- Each section acts as a command line of its own. -- begin -- Initialize_Option_Scan ('-', False, "largs bargs cargs"); -- loop -- -- Same loop as above to get switches and arguments -- end loop; -- Goto_Section ("bargs"); -- loop -- -- Same loop as above to get switches and arguments -- -- The supported switches in Getopt might be different -- end loop; -- Goto_Section ("cargs"); -- loop -- -- Same loop as above to get switches and arguments -- -- The supported switches in Getopt might be different -- end loop; -- end; ------------------------------- -- Parsing a List of Strings -- ------------------------------- -- The examples above show how to parse the command line when the arguments -- are read directly from Ada.Command_Line. However, these arguments can also -- be read from a list of strings. This can be useful in several contexts, -- either because your system does not support Ada.Command_Line, or because -- you are manipulating other tools and creating their command lines by hand, -- or for any other reason. -- To create the list of strings, it is recommended to use -- GNAT.OS_Lib.Argument_String_To_List. -- The example below shows how to get the parameters from such a list. Note -- also the use of '*' to get all the switches, and not report errors when an -- unexpected switch was used by the user -- declare -- Parser : Opt_Parser; -- Args : constant Argument_List_Access := -- GNAT.OS_Lib.Argument_String_To_List ("-g -O1 -Ipath"); -- begin -- Initialize_Option_Scan (Parser, Args); -- while Getopt ("* g O! I=", Parser) /= ASCII.NUL loop -- Put_Line ("Switch " & Full_Switch (Parser) -- & " param=" & Parameter (Parser)); -- end loop; -- Free (Parser); -- end; ------------------------------------------- -- High-Level Command Line Configuration -- ------------------------------------------- -- As shown above, the code is still relatively low-level. For instance, there -- is no way to indicate which switches are related (thus if "-l" and "--long" -- should have the same effect, your code will need to test for both cases). -- Likewise, it is difficult to handle more advanced constructs, like: -- * Specifying -gnatwa is the same as specifying -gnatwu -gnatwv, but -- shorter and more readable -- * All switches starting with -gnatw can be grouped, for instance one -- can write -gnatwcd instead of -gnatwc -gnatwd. -- Of course, this can be combined with the above and -gnatwacd is the -- same as -gnatwc -gnatwd -gnatwu -gnatwv -- * The switch -T is the same as -gnatwAB (same as -gnatwA -gnatwB) -- With the above form of Getopt, you would receive "-gnatwa", "-T" or -- "-gnatwcd" in the examples above, and thus you require additional manual -- parsing of the switch. -- Instead, this package provides the type Command_Line_Configuration, which -- stores all the knowledge above. For instance: -- Config : Command_Line_Configuration; -- Define_Alias (Config, "-gnatwa", "-gnatwu -gnatwv"); -- Define_Prefix (Config, "-gnatw"); -- Define_Alias (Config, "-T", "-gnatwAB"); -- You then need to specify all possible switches in your application by -- calling Define_Switch, for instance: -- Define_Switch (Config, "-gnatwu", Help => "warn on unused entities"); -- Define_Switch (Config, "-gnatwv", Help => "warn on unassigned var"); -- ... -- Specifying the help message is optional, but makes it easy to then call -- the function: -- Display_Help (Config); -- that will display a properly formatted help message for your application, -- listing all possible switches. That way you have a single place in which -- to maintain the list of switches and their meaning, rather than maintaining -- both the string to pass to Getopt and a subprogram to display the help. -- Both will properly stay synchronized. -- Once you have this Config, you just have to call: -- Getopt (Config, Callback'Access); -- to parse the command line. The Callback will be called for each switch -- found on the command line (in the case of our example, that is "-gnatwu" -- and then "-gnatwv", not "-gnatwa" itself). This simplifies command line -- parsing a lot. -- In fact, this can be further automated for the most command case where the -- parameter passed to a switch is stored in a variable in the application. -- When a switch is defined, you only have to indicate where to store the -- value, and let Getopt do the rest. For instance: -- Optimization : aliased Integer; -- Verbose : aliased Boolean; -- Define_Switch (Config, Verbose'Access, -- "-v", Long_Switch => "--verbose", -- Help => "Output extra verbose information"); -- Define_Switch (Config, Optimization'Access, -- "-O?", Help => "Optimization level"); -- Getopt (Config); -- No callback -- Since all switches are handled automatically, we don't even need to pass -- a callback to Getopt. Once getopt has been called, the two variables -- Optimization and Verbose have been properly initialized, either to the -- default value or to the value found on the command line. ------------------------------------------------ -- Creating and Manipulating the Command Line -- ------------------------------------------------ -- This package provides mechanisms to create and modify command lines by -- adding or removing arguments from them. The resulting command line is kept -- as short as possible by coalescing arguments whenever possible. -- Complex command lines can thus be constructed, for example from a GUI -- (although this package does not by itself depend upon any specific GUI -- toolkit). -- Using the configuration defined earlier, one can then construct a command -- line for the tool with: -- Cmd : Command_Line; -- Set_Configuration (Cmd, Config); -- Config created earlier -- Add_Switch (Cmd, "-bar"); -- Add_Switch (Cmd, "-gnatwu"); -- Add_Switch (Cmd, "-gnatwv"); -- will be grouped with the above -- Add_Switch (Cmd, "-T"); -- The resulting command line can be iterated over to get all its switches, -- There are two modes for this iteration: either you want to get the -- shortest possible command line, which would be: -- -bar -gnatwaAB -- or on the other hand you want each individual switch (so that your own -- tool does not have to do further complex processing), which would be: -- -bar -gnatwu -gnatwv -gnatwA -gnatwB -- Of course, we can assume that the tool you want to spawn would understand -- both of these, since they are both compatible with the description we gave -- above. However, the first result is useful if you want to show the user -- what you are spawning (since that keeps the output shorter), and the second -- output is more useful for a tool that would check whether -gnatwu was -- passed (which isn't obvious in the first output). Likewise, the second -- output is more useful if you have a graphical interface since each switch -- can be associated with a widget, and you immediately know whether -gnatwu -- was selected. -- -- Some command line arguments can have parameters, which on a command line -- appear as a separate argument that must immediately follow the switch. -- Since the subprograms in this package will reorganize the switches to group -- them, you need to indicate what is a command line parameter, and what is a -- switch argument. -- This is done by passing an extra argument to Add_Switch, as in: -- Add_Switch (Cmd, "-foo", Parameter => "arg1"); -- This ensures that "arg1" will always be treated as the argument to -foo, -- and will not be grouped with other parts of the command line. with Ada.Command_Line; with GNAT.Directory_Operations; with GNAT.OS_Lib; with GNAT.Regexp; with GNAT.Strings; package GNAT.Command_Line is ------------- -- Parsing -- ------------- type Opt_Parser is private; Command_Line_Parser : constant Opt_Parser; -- This object is responsible for parsing a list of arguments, which by -- default are the standard command line arguments from Ada.Command_Line. -- This is really a pointer to actual data, which must therefore be -- initialized through a call to Initialize_Option_Scan, and must be freed -- with a call to Free. -- -- As a special case, Command_Line_Parser does not need to be either -- initialized or free-ed. procedure Initialize_Option_Scan (Switch_Char : Character := '-'; Stop_At_First_Non_Switch : Boolean := False; Section_Delimiters : String := ""); procedure Initialize_Option_Scan (Parser : out Opt_Parser; Command_Line : GNAT.OS_Lib.Argument_List_Access; Switch_Char : Character := '-'; Stop_At_First_Non_Switch : Boolean := False; Section_Delimiters : String := ""); -- The first procedure resets the internal state of the package to prepare -- to rescan the parameters. It does not need to be called before the -- first use of Getopt (but it could be), but it must be called if you -- want to start rescanning the command line parameters from the start. -- The optional parameter Switch_Char can be used to reset the switch -- character, e.g. to '/' for use in DOS-like systems. -- -- The second subprogram initializes a parser that takes its arguments -- from an array of strings rather than directly from the command line. In -- this case, the parser is responsible for freeing the strings stored in -- Command_Line. If you pass null to Command_Line, this will in fact create -- a second parser for Ada.Command_Line, which doesn't share any data with -- the default parser. This parser must be free'ed. -- -- The optional parameter Stop_At_First_Non_Switch indicates if Getopt is -- to look for switches on the whole command line, or if it has to stop as -- soon as a non-switch argument is found. -- -- Example: -- -- Arguments: my_application file1 -c -- -- If Stop_At_First_Non_Switch is False, then -c will be considered -- as a switch (returned by getopt), otherwise it will be considered -- as a normal argument (returned by Get_Argument). -- -- If Section_Delimiters is set, then every following subprogram -- (Getopt and Get_Argument) will only operate within a section, which -- is delimited by any of these delimiters or the end of the command line. -- -- Example: -- Initialize_Option_Scan (Section_Delimiters => "largs bargs cargs"); -- -- Arguments on command line : my_application -c -bargs -d -e -largs -f -- This line contains three sections, the first one is the default one -- and includes only the '-c' switch, the second one is between -bargs -- and -largs and includes '-d -e' and the last one includes '-f'. procedure Free (Parser : in out Opt_Parser); -- Free the memory used by the parser. Calling this is not mandatory for -- the Command_Line_Parser procedure Goto_Section (Name : String := ""; Parser : Opt_Parser := Command_Line_Parser); -- Change the current section. The next Getopt or Get_Argument will start -- looking at the beginning of the section. An empty name ("") refers to -- the first section between the program name and the first section -- delimiter. If the section does not exist in Section_Delimiters, then -- Invalid_Section is raised. If the section does not appear on the command -- line, then it is treated as an empty section. function Full_Switch (Parser : Opt_Parser := Command_Line_Parser) return String; -- Returns the full name of the last switch found (Getopt only returns the -- first character). Does not include the Switch_Char ('-' by default), -- unless the "*" option of Getopt is used (see below). function Current_Section (Parser : Opt_Parser := Command_Line_Parser) return String; -- Return the name of the current section. -- The list of valid sections is defined through Initialize_Option_Scan function Getopt (Switches : String; Concatenate : Boolean := True; Parser : Opt_Parser := Command_Line_Parser) return Character; -- This function moves to the next switch on the command line (defined as -- switch character followed by a character within Switches, casing being -- significant). The result returned is the first character of the switch -- that is located. If there are no more switches in the current section, -- returns ASCII.NUL. If Concatenate is True (the default), the switches do -- not need to be separated by spaces (they can be concatenated if they do -- not require an argument, e.g. -ab is the same as two separate arguments -- -a -b). -- -- Switches is a string of all the possible switches, separated by -- spaces. A switch can be followed by one of the following characters: -- -- ':' The switch requires a parameter. There can optionally be a space -- on the command line between the switch and its parameter. -- -- '=' The switch requires a parameter. There can either be a '=' or a -- space on the command line between the switch and its parameter. -- -- '!' The switch requires a parameter, but there can be no space on the -- command line between the switch and its parameter. -- -- '?' The switch may have an optional parameter. There can be no space -- between the switch and its argument. -- -- e.g. if Switches has the following value : "a? b", -- The command line can be: -- -- -afoo : -a switch with 'foo' parameter -- -a foo : -a switch and another element on the -- command line 'foo', returned by Get_Argument -- -- Example: if Switches is "-a: -aO:", you can have the following -- command lines: -- -- -aarg : 'a' switch with 'arg' parameter -- -a arg : 'a' switch with 'arg' parameter -- -aOarg : 'aO' switch with 'arg' parameter -- -aO arg : 'aO' switch with 'arg' parameter -- -- Example: -- -- Getopt ("a b: ac ad?") -- -- accept either 'a' or 'ac' with no argument, -- accept 'b' with a required argument -- accept 'ad' with an optional argument -- -- If the first item in switches is '*', then Getopt will catch -- every element on the command line that was not caught by any other -- switch. The character returned by GetOpt is '*', but Full_Switch -- contains the full command line argument, including leading '-' if there -- is one. If this character was not returned, there would be no way of -- knowing whether it is there or not. -- -- Example -- Getopt ("* a b") -- If the command line is '-a -c toto.o -b', Getopt will return -- successively 'a', '*', '*' and 'b', with Full_Switch returning -- "a", "-c", "toto.o", and "b". -- -- When Getopt encounters an invalid switch, it raises the exception -- Invalid_Switch and sets Full_Switch to return the invalid switch. -- When Getopt cannot find the parameter associated with a switch, it -- raises Invalid_Parameter, and sets Full_Switch to return the invalid -- switch. -- -- Note: in case of ambiguity, e.g. switches a ab abc, then the longest -- matching switch is returned. -- -- Arbitrary characters are allowed for switches, although it is -- strongly recommended to use only letters and digits for portability -- reasons. -- -- When Concatenate is False, individual switches need to be separated by -- spaces. -- -- Example -- Getopt ("a b", Concatenate => False) -- If the command line is '-ab', exception Invalid_Switch will be -- raised and Full_Switch will return "ab". function Get_Argument (Do_Expansion : Boolean := False; Parser : Opt_Parser := Command_Line_Parser) return String; -- Returns the next element on the command line that is not a switch. This -- function should be called either after Getopt has returned ASCII.NUL or -- after Getopt procedure call. -- -- If Do_Expansion is True, then the parameter on the command line will -- be considered as a filename with wildcards, and will be expanded. The -- matching file names will be returned one at a time. This is useful in -- non-Unix systems for obtaining normal expansion of wildcard references. -- When there are no more arguments on the command line, this function -- returns an empty string. function Get_Argument (Do_Expansion : Boolean := False; Parser : Opt_Parser := Command_Line_Parser; End_Of_Arguments : out Boolean) return String; -- The same as above but able to distinguish empty element in argument list -- from end of arguments. -- End_Of_Arguments is True if the end of the command line has been reached -- (i.e. all available arguments have been returned by previous calls to -- Get_Argument). function Parameter (Parser : Opt_Parser := Command_Line_Parser) return String; -- Returns parameter associated with the last switch returned by Getopt. -- If no parameter was associated with the last switch, or no previous call -- has been made to Get_Argument, raises Invalid_Parameter. If the last -- switch was associated with an optional argument and this argument was -- not found on the command line, Parameter returns an empty string. function Separator (Parser : Opt_Parser := Command_Line_Parser) return Character; -- The separator that was between the switch and its parameter. This is -- useful if you want to know exactly what was on the command line. This -- is in general a single character, set to ASCII.NUL if the switch and -- the parameter were concatenated. A space is returned if the switch and -- its argument were in two separate arguments. Invalid_Section : exception; -- Raised when an invalid section is selected by Goto_Section Invalid_Switch : exception; -- Raised when an invalid switch is detected in the command line Invalid_Parameter : exception; -- Raised when a parameter is missing, or an attempt is made to obtain a -- parameter for a switch that does not allow a parameter. ----------------------------------------- -- Expansion of command line arguments -- ----------------------------------------- -- These subprograms take care of expanding globbing patterns on the -- command line. On Unix, such expansion is done by the shell before your -- application is called. But on Windows you must do this expansion -- yourself. type Expansion_Iterator is limited private; -- Type used during expansion of file names procedure Start_Expansion (Iterator : out Expansion_Iterator; Pattern : String; Directory : String := ""; Basic_Regexp : Boolean := True); -- Initialize a wildcard expansion. The next calls to Expansion will -- return the next file name in Directory which match Pattern (Pattern -- is a regular expression, using only the Unix shell and DOS syntax if -- Basic_Regexp is True). When Directory is an empty string, the current -- directory is searched. -- -- Pattern may contain directory separators (as in "src/*/*.ada"). -- Subdirectories of Directory will also be searched, up to one -- hundred levels deep. -- -- When Start_Expansion has been called, function Expansion should -- be called repeatedly until it returns an empty string, before -- Start_Expansion can be called again with the same Expansion_Iterator -- variable. function Expansion (Iterator : Expansion_Iterator) return String; -- Returns the next file in the directory matching the parameters given -- to Start_Expansion and updates Iterator to point to the next entry. -- Returns an empty string when there are no more files. -- -- If Expansion is called again after an empty string has been returned, -- then the exception GNAT.Directory_Operations.Directory_Error is raised. ----------------- -- Configuring -- ----------------- -- The following subprograms are used to manipulate a command line -- represented as a string (for instance "-g -O2"), as well as parsing -- the switches from such a string. They provide high-level configurations -- to define aliases (a switch is equivalent to one or more other switches) -- or grouping of switches ("-gnatyac" is equivalent to "-gnatya" and -- "-gnatyc"). -- See the top of this file for examples on how to use these subprograms type Command_Line_Configuration is private; procedure Define_Section (Config : in out Command_Line_Configuration; Section : String); -- Indicates a new switch section. All switches belonging to the same -- section are ordered together, preceded by the section. They are placed -- at the end of the command line (as in "gnatmake somefile.adb -cargs -g") -- -- The section name should not include the leading '-'. So for instance in -- the case of gnatmake we would use: -- -- Define_Section (Config, "cargs"); -- Define_Section (Config, "bargs"); procedure Define_Alias (Config : in out Command_Line_Configuration; Switch : String; Expanded : String; Section : String := ""); -- Indicates that whenever Switch appears on the command line, it should -- be expanded as Expanded. For instance, for the GNAT compiler switches, -- we would define "-gnatwa" as an alias for "-gnatwcfijkmopruvz", ie some -- default warnings to be activated. -- -- This expansion is only done within the specified section, which must -- have been defined first through a call to [Define_Section]. procedure Define_Prefix (Config : in out Command_Line_Configuration; Prefix : String); -- Indicates that all switches starting with the given prefix should be -- grouped. For instance, for the GNAT compiler we would define "-gnatw" as -- a prefix, so that "-gnatwu -gnatwv" can be grouped into "-gnatwuv" It is -- assumed that the remainder of the switch ("uv") is a set of characters -- whose order is irrelevant. In fact, this package will sort them -- alphabetically. -- -- When grouping switches that accept arguments (for instance "-gnatyL!" -- as the definition, and "-gnatyaL12b" as the command line), only -- numerical arguments are accepted. The above is equivalent to -- "-gnatya -gnatyL12 -gnatyb". procedure Define_Switch (Config : in out Command_Line_Configuration; Switch : String := ""; Long_Switch : String := ""; Help : String := ""; Section : String := ""; Argument : String := "ARG"); -- Indicates a new switch. The format of this switch follows the getopt -- format (trailing ':', '?', etc for defining a switch with parameters). -- -- Switch should also start with the leading '-' (or any other characters). -- If this character is not '-', you need to call Initialize_Option_Scan to -- set the proper character for the parser. -- -- The switches defined in the command_line_configuration object are used -- when ungrouping switches with more that one character after the prefix. -- -- Switch and Long_Switch (when specified) are aliases and can be used -- interchangeably. There is no check that they both take an argument or -- both take no argument. Switch can be set to "*" to indicate that any -- switch is supported (in which case Getopt will return '*', see its -- documentation). -- -- Help is used by the Display_Help procedure to describe the supported -- switches. -- -- In_Section indicates in which section the switch is valid (you need to -- first define the section through a call to Define_Section). -- -- Argument is the name of the argument, as displayed in the automatic -- help message. It is always capitalized for consistency. procedure Define_Switch (Config : in out Command_Line_Configuration; Output : access Boolean; Switch : String := ""; Long_Switch : String := ""; Help : String := ""; Section : String := ""; Value : Boolean := True); -- See Define_Switch for a description of the parameters. -- When the switch is found on the command line, Getopt will set -- Output.all to Value. -- -- Output is always initially set to "not Value", so that if the switch is -- not found on the command line, Output still has a valid value. -- The switch must not take any parameter. -- -- Output must exist at least as long as Config, otherwise an erroneous -- memory access may occur. procedure Define_Switch (Config : in out Command_Line_Configuration; Output : access Integer; Switch : String := ""; Long_Switch : String := ""; Help : String := ""; Section : String := ""; Initial : Integer := 0; Default : Integer := 1; Argument : String := "ARG"); -- See Define_Switch for a description of the parameters. When the -- switch is found on the command line, Getopt will set Output.all to the -- value of the switch's parameter. If the parameter is not an integer, -- Invalid_Parameter is raised. -- Output is always initialized to Initial. If the switch has an optional -- argument which isn't specified by the user, then Output will be set to -- Default. The switch must accept an argument. procedure Define_Switch (Config : in out Command_Line_Configuration; Output : access GNAT.Strings.String_Access; Switch : String := ""; Long_Switch : String := ""; Help : String := ""; Section : String := ""; Argument : String := "ARG"); -- Set Output to the value of the switch's parameter when the switch is -- found on the command line. Output is always initialized to the empty -- string if it does not have a value already (otherwise it is left as is -- so that you can specify the default value directly in the declaration -- of the variable). The switch must accept an argument. type Value_Callback is access procedure (Switch, Value : String); procedure Define_Switch (Config : in out Command_Line_Configuration; Callback : not null Value_Callback; Switch : String := ""; Long_Switch : String := ""; Help : String := ""; Section : String := ""; Argument : String := "ARG"); -- Call Callback for each instance of Switch. The callback is given the -- actual switch and the corresponding value. The switch must accept -- an argument. procedure Set_Usage (Config : in out Command_Line_Configuration; Usage : String := "[switches] [arguments]"; Help : String := ""; Help_Msg : String := ""); -- Defines the general format of the call to the application, and a short -- help text. These are both displayed by Display_Help. When a non-empty -- Help_Msg is given, it is used by Display_Help instead of the -- automatically generated list of supported switches. procedure Display_Help (Config : Command_Line_Configuration); -- Display the help for the tool (i.e. its usage, and its supported -- switches). function Get_Switches (Config : Command_Line_Configuration; Switch_Char : Character := '-'; Section : String := "") return String; -- Get the switches list as expected by Getopt, for a specific section of -- the command line. This list is built using all switches defined -- previously via Define_Switch above. function Section_Delimiters (Config : Command_Line_Configuration) return String; -- Return a string suitable for use in Initialize_Option_Scan procedure Free (Config : in out Command_Line_Configuration); -- Free the memory used by Config type Switch_Handler is access procedure (Switch : String; Parameter : String; Section : String); -- Called when a switch is found on the command line. Switch includes -- any leading '-' that was specified in Define_Switch. This is slightly -- different from the functional version of Getopt above, for which -- Full_Switch omits the first leading '-'. Exit_From_Command_Line : exception; -- Raised when the program should exit because Getopt below has seen -- a -h or --help switch. procedure Getopt (Config : Command_Line_Configuration; Callback : Switch_Handler := null; Parser : Opt_Parser := Command_Line_Parser; Concatenate : Boolean := True; Quiet : Boolean := False); -- Similar to the standard Getopt function. For each switch found on the -- command line, this calls Callback, if the switch is not handled -- automatically. -- -- The list of valid switches are the ones from the configuration. The -- switches that were declared through Define_Switch with an Output -- parameter are never returned (and result in a modification of the Output -- variable). This function will in fact never call [Callback] if all -- switches were handled automatically and there is nothing left to do. -- -- The option Concatenate is identical to the one of the standard Getopt -- function. -- -- This procedure automatically adds -h and --help to the valid switches, -- to display the help message and raises Exit_From_Command_Line. -- If an invalid switch is specified on the command line, this procedure -- will display an error message and raises Invalid_Switch again. -- If the Quiet parameter is True then the error message is not displayed. -- -- This function automatically expands switches: -- -- If Define_Prefix was called (for instance "-gnaty") and the user -- specifies "-gnatycb" on the command line, then Getopt returns -- "-gnatyc" and "-gnatyb" separately. -- -- If Define_Alias was called (for instance "-gnatya = -gnatycb") then -- the latter is returned (in this case it also expands -gnaty as per -- the above. -- -- The goal is to make handling as easy as possible by leaving as much -- work as possible to this package. -- -- As opposed to the standard Getopt, this one will analyze all sections -- as defined by Define_Section, and automatically jump from one section to -- the next. ------------------------------ -- Generating command lines -- ------------------------------ -- Once the command line configuration has been created, you can build your -- own command line. This will be done in general because you need to spawn -- external tools from your application. -- Although it could be done by concatenating strings, the following -- subprograms will properly take care of grouping switches when possible, -- so as to keep the command line as short as possible. They also provide a -- way to remove a switch from an existing command line. -- For instance: -- declare -- Config : Command_Line_Configuration; -- Line : Command_Line; -- Args : Argument_List_Access; -- begin -- Define_Switch (Config, "-gnatyc"); -- Define_Switch (Config, ...); -- for all valid switches -- Define_Prefix (Config, "-gnaty"); -- Set_Configuration (Line, Config); -- Add_Switch (Line, "-O2"); -- Add_Switch (Line, "-gnatyc"); -- Add_Switch (Line, "-gnatyd"); -- -- Build (Line, Args); -- -- Args is now ["-O2", "-gnatycd"] -- end; type Command_Line is private; procedure Set_Configuration (Cmd : in out Command_Line; Config : Command_Line_Configuration); function Get_Configuration (Cmd : Command_Line) return Command_Line_Configuration; -- Set or retrieve the configuration used for that command line. The Config -- must have been initialized first, by calling one of the Define_Switches -- subprograms. procedure Set_Command_Line (Cmd : in out Command_Line; Switches : String; Getopt_Description : String := ""; Switch_Char : Character := '-'); -- Set the new content of the command line, by replacing the current -- version with Switches. -- -- The parsing of Switches is done through calls to Getopt, by passing -- Getopt_Description as an argument. (A "*" is automatically prepended so -- that all switches and command line arguments are accepted). If a config -- was defined via Set_Configuration, the Getopt_Description parameter will -- be ignored. -- -- To properly handle switches that take parameters, you should document -- them in Getopt_Description. Otherwise, the switch and its parameter will -- be recorded as two separate command line arguments as returned by a -- Command_Line_Iterator (which might be fine depending on your -- application). -- -- If the command line has sections (such as -bargs -cargs), then they -- should be listed in the Sections parameter (as "-bargs -cargs"). -- -- This function can be used to reset Cmd by passing an empty string -- -- If an invalid switch is found on the command line (i.e. wasn't defined -- in the configuration via Define_Switch), and the configuration wasn't -- set to accept all switches (by defining "*" as a valid switch), then an -- exception Invalid_Switch is raised. The exception message indicates the -- invalid switch. procedure Add_Switch (Cmd : in out Command_Line; Switch : String; Parameter : String := ""; Separator : Character := ASCII.NUL; Section : String := ""; Add_Before : Boolean := False); -- Add a new switch to the command line, and combine/group it with existing -- switches if possible. Nothing is done if the switch already exists with -- the same parameter. -- -- If the Switch takes a parameter, the latter should be specified -- separately, so that the association between the two is always correctly -- recognized even if the order of switches on the command line changes. -- For instance, you should pass "--check=full" as ("--check", "full") so -- that Remove_Switch below can simply take "--check" in parameter. That -- will automatically remove "full" as well. The value of the parameter is -- never modified by this package. -- -- On the other hand, you could decide to simply pass "--check=full" as -- the Switch above, and then pass no parameter. This means that you need -- to pass "--check=full" to Remove_Switch as well. -- -- A Switch with a parameter will never be grouped with another switch to -- avoid ambiguities as to what the parameter applies to. -- -- If the switch is part of a section, then it should be specified so that -- the switch is correctly placed in the command line, and the section -- added if not already present. For example, to add the -g switch into the -- -cargs section, you need to call (Cmd, "-g", Section => "-cargs"). -- -- [Separator], if specified, overrides the separator that was defined -- through Define_Switch. For instance, if the switch was defined as -- "-from:", the separator defaults to a space. But if your application -- uses unusual separators not supported by GNAT.Command_Line (for instance -- it requires ":"), you can specify this separator here. -- -- For instance, -- Add_Switch(Cmd, "-from", "bar", ':') -- -- results in -- -from:bar -- -- rather than the default -- -from bar -- -- Note however that Getopt doesn't know how to handle ":" as a separator. -- So the recommendation is to declare the switch as "-from!" (i.e. no -- space between the switch and its parameter). Then Getopt will return -- ":bar" as the parameter, and you can trim the ":" in your application. -- -- Invalid_Section is raised if Section was not defined in the -- configuration of the command line. -- -- Add_Before allows insertion of the switch at the beginning of the -- command line. procedure Add_Switch (Cmd : in out Command_Line; Switch : String; Parameter : String := ""; Separator : Character := ASCII.NUL; Section : String := ""; Add_Before : Boolean := False; Success : out Boolean); -- Same as above, returning the status of the operation procedure Remove_Switch (Cmd : in out Command_Line; Switch : String; Remove_All : Boolean := False; Has_Parameter : Boolean := False; Section : String := ""); -- Remove Switch from the command line, and ungroup existing switches if -- necessary. -- -- The actual parameter to the switches are ignored. If for instance -- you are removing "-foo", then "-foo param1" and "-foo param2" can -- be removed. -- -- If Remove_All is True, then all matching switches are removed, otherwise -- only the first matching one is removed. -- -- If Has_Parameter is set to True, then only switches having a parameter -- are removed. -- -- If the switch belongs to a section, then this section should be -- specified: Remove_Switch (Cmd_Line, "-g", Section => "-cargs") called -- on the command line "-g -cargs -g" will result in "-g", while if -- called with (Cmd_Line, "-g") this will result in "-cargs -g". -- If Remove_All is set, then both "-g" will be removed. procedure Remove_Switch (Cmd : in out Command_Line; Switch : String; Remove_All : Boolean := False; Has_Parameter : Boolean := False; Section : String := ""; Success : out Boolean); -- Same as above, reporting the success of the operation (Success is False -- if no switch was removed). procedure Remove_Switch (Cmd : in out Command_Line; Switch : String; Parameter : String; Section : String := ""); -- Remove a switch with a specific parameter. If Parameter is the empty -- string, then only a switch with no parameter will be removed. procedure Free (Cmd : in out Command_Line); -- Free the memory used by Cmd --------------- -- Iteration -- --------------- -- When a command line was created with the above, you can then iterate -- over its contents using the following iterator. type Command_Line_Iterator is private; procedure Start (Cmd : in out Command_Line; Iter : in out Command_Line_Iterator; Expanded : Boolean := False); -- Start iterating over the command line arguments. If Expanded is true, -- then the arguments are not grouped and no alias is used. For instance, -- "-gnatwv" and "-gnatwu" would be returned instead of "-gnatwuv". -- -- The iterator becomes invalid if the command line is changed through a -- call to Add_Switch, Remove_Switch or Set_Command_Line. function Current_Switch (Iter : Command_Line_Iterator) return String; function Is_New_Section (Iter : Command_Line_Iterator) return Boolean; function Current_Section (Iter : Command_Line_Iterator) return String; function Current_Separator (Iter : Command_Line_Iterator) return String; function Current_Parameter (Iter : Command_Line_Iterator) return String; -- Return the current switch and its parameter (or the empty string if -- there is no parameter or the switch was added through Add_Switch -- without specifying the parameter. -- -- Separator is the string that goes between the switch and its separator. -- It could be the empty string if they should be concatenated, or a space -- for instance. When printing, you should not add any other character. function Has_More (Iter : Command_Line_Iterator) return Boolean; -- Return True if there are more switches to be returned procedure Next (Iter : in out Command_Line_Iterator); -- Move to the next switch procedure Build (Line : in out Command_Line; Args : out GNAT.OS_Lib.Argument_List_Access; Expanded : Boolean := False; Switch_Char : Character := '-'); -- This is a wrapper using the Command_Line_Iterator. It provides a simple -- way to get all switches (grouped as much as possible), and possibly -- create an Opt_Parser. -- -- Args must be freed by the caller. -- -- Expanded has the same meaning as in Start. procedure Try_Help; -- Output a message on standard error to indicate how to get the usage for -- the executable. This procedure should only be called when the executable -- accepts switch --help. When this procedure is called by executable xxx, -- the following message is displayed on standard error: -- try "xxx --help" for more information. private Max_Depth : constant := 100; -- Maximum depth of subdirectories Max_Path_Length : constant := 1024; -- Maximum length of relative path type Depth is range 1 .. Max_Depth; type Level is record Name_Last : Natural := 0; Dir : GNAT.Directory_Operations.Dir_Type; end record; type Level_Array is array (Depth) of Level; type Section_Number is new Natural range 0 .. 65534; for Section_Number'Size use 16; type Parameter_Type is record Arg_Num : Positive; First : Positive; Last : Natural; Extra : Character; end record; type Is_Switch_Type is array (Natural range <>) of Boolean; pragma Pack (Is_Switch_Type); type Section_Type is array (Natural range <>) of Section_Number; pragma Pack (Section_Type); type Expansion_Iterator is limited record Start : Positive := 1; -- Position of the first character of the relative path to check against -- the pattern. Dir_Name : String (1 .. Max_Path_Length); Current_Depth : Depth := 1; Levels : Level_Array; Regexp : GNAT.Regexp.Regexp; -- Regular expression built with the pattern Maximum_Depth : Depth := 1; -- The maximum depth of directories, reflecting the number of directory -- separators in the pattern. end record; type Opt_Parser_Data (Arg_Count : Natural) is record Arguments : GNAT.OS_Lib.Argument_List_Access; -- null if reading from the command line The_Parameter : Parameter_Type; The_Separator : Character; The_Switch : Parameter_Type; -- This type and this variable are provided to store the current switch -- and parameter. Is_Switch : Is_Switch_Type (1 .. Arg_Count) := [others => False]; -- Indicates wich arguments on the command line are considered not be -- switches or parameters to switches (leaving e.g. filenames,...) Section : Section_Type (1 .. Arg_Count) := [others => 1]; -- Contains the number of the section associated with the current -- switch. If this number is 0, then it is a section delimiter, which is -- never returned by GetOpt. Current_Argument : Natural := 1; -- Number of the current argument parsed on the command line Current_Index : Natural := 1; -- Index in the current argument of the character to be processed Current_Section : Section_Number := 1; Expansion_It : aliased Expansion_Iterator; -- When Get_Argument is expanding a file name, this is the iterator used In_Expansion : Boolean := False; -- True if we are expanding a file Switch_Character : Character := '-'; -- The character at the beginning of the command line arguments, -- indicating the beginning of a switch. Stop_At_First : Boolean := False; -- If it is True then Getopt stops at the first non-switch argument end record; Command_Line_Parser_Data : aliased Opt_Parser_Data (Ada.Command_Line.Argument_Count); -- The internal data used when parsing the command line type Opt_Parser is access all Opt_Parser_Data; Command_Line_Parser : constant Opt_Parser := Command_Line_Parser_Data'Access; type Switch_Type is (Switch_Untyped, Switch_Boolean, Switch_Integer, Switch_String, Switch_Callback); type Switch_Definition (Typ : Switch_Type := Switch_Untyped) is record Switch : GNAT.OS_Lib.String_Access; Long_Switch : GNAT.OS_Lib.String_Access; Section : GNAT.OS_Lib.String_Access; Help : GNAT.OS_Lib.String_Access; Argument : GNAT.OS_Lib.String_Access; -- null if "ARG". -- Name of the argument for this switch. case Typ is when Switch_Untyped => null; when Switch_Boolean => Boolean_Output : access Boolean; Boolean_Value : Boolean; -- will set Output to that value when Switch_Integer => Integer_Output : access Integer; Integer_Initial : Integer; Integer_Default : Integer; when Switch_String => String_Output : access GNAT.Strings.String_Access; when Switch_Callback => Callback : Value_Callback; end case; end record; type Switch_Definitions is array (Natural range <>) of Switch_Definition; type Switch_Definitions_List is access all Switch_Definitions; -- [Switch] includes the leading '-' type Alias_Definition is record Alias : GNAT.OS_Lib.String_Access; Expansion : GNAT.OS_Lib.String_Access; Section : GNAT.OS_Lib.String_Access; end record; type Alias_Definitions is array (Natural range <>) of Alias_Definition; type Alias_Definitions_List is access all Alias_Definitions; type Command_Line_Configuration_Record is record Prefixes : GNAT.OS_Lib.Argument_List_Access; -- The list of prefixes Sections : GNAT.OS_Lib.Argument_List_Access; -- The list of sections Star_Switch : Boolean := False; -- Whether switches not described in this configuration should be -- returned to the user (True). If False, an exception Invalid_Switch -- is raised. Aliases : Alias_Definitions_List; Usage : GNAT.OS_Lib.String_Access; Help : GNAT.OS_Lib.String_Access; Help_Msg : GNAT.OS_Lib.String_Access; Switches : Switch_Definitions_List; -- List of expected switches (Used when expanding switch groups) end record; type Command_Line_Configuration is access Command_Line_Configuration_Record; type Command_Line is record Config : Command_Line_Configuration; Expanded : GNAT.OS_Lib.Argument_List_Access; Params : GNAT.OS_Lib.Argument_List_Access; -- Parameter for the corresponding switch in Expanded. The first -- character is the separator (or ASCII.NUL if there is no separator). Sections : GNAT.OS_Lib.Argument_List_Access; -- The list of sections Coalesce : GNAT.OS_Lib.Argument_List_Access; Coalesce_Params : GNAT.OS_Lib.Argument_List_Access; Coalesce_Sections : GNAT.OS_Lib.Argument_List_Access; -- Cached version of the command line. This is recomputed every time -- the command line changes. Switches are grouped as much as possible, -- and aliases are used to reduce the length of the command line. The -- parameters are not allocated, they point into Params, so they must -- not be freed. end record; type Command_Line_Iterator is record List : GNAT.OS_Lib.Argument_List_Access; Sections : GNAT.OS_Lib.Argument_List_Access; Params : GNAT.OS_Lib.Argument_List_Access; Current : Natural; end record; end GNAT.Command_Line;