;; Machine description for GNU compiler,
;; for ATMEL AVR micro controllers.
;; Copyright (C) 1998-2017 Free Software Foundation, Inc.
;; Contributed by Denis Chertykov (chertykov@gmail.com)
;; This file is part of GCC.
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; .
;; Special characters after '%':
;; A No effect (add 0).
;; B Add 1 to REG number, MEM address or CONST_INT.
;; C Add 2.
;; D Add 3.
;; E reg number in XEXP(x, 0).
;; F Add 1 to reg number.
;; I reg number in XEXP(XEXP(x, 0), 0).
;; J Add 1 to reg number.
;; j Branch condition.
;; k Reverse branch condition.
;;..m..Constant Direct Data memory address.
;; i Print the SFR address quivalent of a CONST_INT or a CONST_INT
;; RAM address. The resulting address is suitable to be used in IN/OUT.
;; o Displacement for (mem (plus (reg) (const_int))) operands.
;; p POST_INC or PRE_DEC address as a pointer (X, Y, Z)
;; r POST_INC or PRE_DEC address as a register (r26, r28, r30)
;; r Print a REG without the register prefix 'r'.
;; T/T Print operand suitable for BLD/BST instruction, i.e. register and
;; bit number. This gets 2 operands: The first %T gets a REG_P and
;; just cashes the operand for the next %T. The second %T gets
;; a CONST_INT that represents a bit position.
;; Example: With %0 = (reg:HI 18) and %1 = (const_int 13)
;; "%T0%T1" it will print "r19,5".
;; Notice that you must not write a comma between %T0 and %T1.
;; T/t Similar to above, but don't print the comma and the bit number.
;; Example: With %0 = (reg:HI 18) and %1 = (const_int 13)
;; "%T0%t1" it will print "r19".
;;..x..Constant Direct Program memory address.
;; ~ Output 'r' if not AVR_HAVE_JMP_CALL.
;; ! Output 'e' if AVR_HAVE_EIJMP_EICALL.
(define_constants
[(REG_X 26)
(REG_Y 28)
(REG_Z 30)
(REG_W 24)
(REG_SP 32)
(LPM_REGNO 0) ; implicit target register of LPM
(TMP_REGNO 0) ; temporary register r0
(ZERO_REGNO 1) ; zero register r1
])
(define_constants
[(TMP_REGNO_TINY 16) ; r16 is temp register for AVR_TINY
(ZERO_REGNO_TINY 17) ; r17 is zero register for AVR_TINY
])
(define_c_enum "unspec"
[UNSPEC_STRLEN
UNSPEC_MOVMEM
UNSPEC_INDEX_JMP
UNSPEC_FMUL
UNSPEC_FMULS
UNSPEC_FMULSU
UNSPEC_COPYSIGN
UNSPEC_IDENTITY
UNSPEC_INSERT_BITS
UNSPEC_ROUND
])
(define_c_enum "unspecv"
[UNSPECV_PROLOGUE_SAVES
UNSPECV_EPILOGUE_RESTORES
UNSPECV_WRITE_SP
UNSPECV_GOTO_RECEIVER
UNSPECV_ENABLE_IRQS
UNSPECV_MEMORY_BARRIER
UNSPECV_NOP
UNSPECV_SLEEP
UNSPECV_WDR
UNSPECV_DELAY_CYCLES
])
(include "predicates.md")
(include "constraints.md")
;; Condition code settings.
(define_attr "cc" "none,set_czn,set_zn,set_vzn,set_n,compare,clobber,
plus,ldi"
(const_string "none"))
(define_attr "type" "branch,branch1,arith,xcall"
(const_string "arith"))
;; The size of instructions in bytes.
;; XXX may depend from "cc"
(define_attr "length" ""
(cond [(eq_attr "type" "branch")
(if_then_else (and (ge (minus (pc) (match_dup 0))
(const_int -62))
(le (minus (pc) (match_dup 0))
(const_int 62)))
(const_int 1)
(if_then_else (and (ge (minus (pc) (match_dup 0))
(const_int -2044))
(le (minus (pc) (match_dup 0))
(const_int 2045)))
(const_int 2)
(const_int 3)))
(eq_attr "type" "branch1")
(if_then_else (and (ge (minus (pc) (match_dup 0))
(const_int -62))
(le (minus (pc) (match_dup 0))
(const_int 61)))
(const_int 2)
(if_then_else (and (ge (minus (pc) (match_dup 0))
(const_int -2044))
(le (minus (pc) (match_dup 0))
(const_int 2043)))
(const_int 3)
(const_int 4)))
(eq_attr "type" "xcall")
(if_then_else (match_test "!AVR_HAVE_JMP_CALL")
(const_int 1)
(const_int 2))]
(const_int 2)))
;; Lengths of several insns are adjusted in avr.c:adjust_insn_length().
;; Following insn attribute tells if and how the adjustment has to be
;; done:
;; no No adjustment needed; attribute "length" is fine.
;; Otherwise do special processing depending on the attribute.
(define_attr "adjust_len"
"out_bitop, plus, addto_sp, sext,
tsthi, tstpsi, tstsi, compare, compare64, call,
mov8, mov16, mov24, mov32, reload_in16, reload_in24, reload_in32,
ufract, sfract, round,
xload, movmem,
ashlqi, ashrqi, lshrqi,
ashlhi, ashrhi, lshrhi,
ashlsi, ashrsi, lshrsi,
ashlpsi, ashrpsi, lshrpsi,
insert_bits, insv_notbit, insv_notbit_0, insv_notbit_7,
no"
(const_string "no"))
;; Flavours of instruction set architecture (ISA), used in enabled attribute
;; mov : ISA has no MOVW movw : ISA has MOVW
;; rjmp : ISA has no CALL/JMP jmp : ISA has CALL/JMP
;; ijmp : ISA has no EICALL/EIJMP eijmp : ISA has EICALL/EIJMP
;; lpm : ISA has no LPMX lpmx : ISA has LPMX
;; elpm : ISA has ELPM but no ELPMX elpmx : ISA has ELPMX
;; no_xmega: non-XMEGA core xmega : XMEGA core
;; no_tiny: non-TINY core tiny : TINY core
(define_attr "isa"
"mov,movw, rjmp,jmp, ijmp,eijmp, lpm,lpmx, elpm,elpmx, no_xmega,xmega, no_tiny,tiny,
standard"
(const_string "standard"))
(define_attr "enabled" ""
(cond [(eq_attr "isa" "standard")
(const_int 1)
(and (eq_attr "isa" "mov")
(match_test "!AVR_HAVE_MOVW"))
(const_int 1)
(and (eq_attr "isa" "movw")
(match_test "AVR_HAVE_MOVW"))
(const_int 1)
(and (eq_attr "isa" "rjmp")
(match_test "!AVR_HAVE_JMP_CALL"))
(const_int 1)
(and (eq_attr "isa" "jmp")
(match_test "AVR_HAVE_JMP_CALL"))
(const_int 1)
(and (eq_attr "isa" "ijmp")
(match_test "!AVR_HAVE_EIJMP_EICALL"))
(const_int 1)
(and (eq_attr "isa" "eijmp")
(match_test "AVR_HAVE_EIJMP_EICALL"))
(const_int 1)
(and (eq_attr "isa" "lpm")
(match_test "!AVR_HAVE_LPMX"))
(const_int 1)
(and (eq_attr "isa" "lpmx")
(match_test "AVR_HAVE_LPMX"))
(const_int 1)
(and (eq_attr "isa" "elpm")
(match_test "AVR_HAVE_ELPM && !AVR_HAVE_ELPMX"))
(const_int 1)
(and (eq_attr "isa" "elpmx")
(match_test "AVR_HAVE_ELPMX"))
(const_int 1)
(and (eq_attr "isa" "xmega")
(match_test "AVR_XMEGA"))
(const_int 1)
(and (eq_attr "isa" "tiny")
(match_test "AVR_TINY"))
(const_int 1)
(and (eq_attr "isa" "no_xmega")
(match_test "!AVR_XMEGA"))
(const_int 1)
(and (eq_attr "isa" "no_tiny")
(match_test "!AVR_TINY"))
(const_int 1)
] (const_int 0)))
;; Define mode iterators
(define_mode_iterator QIHI [QI HI])
(define_mode_iterator QIHI2 [QI HI])
(define_mode_iterator QISI [QI HI PSI SI])
(define_mode_iterator QIDI [QI HI PSI SI DI])
(define_mode_iterator HISI [HI PSI SI])
(define_mode_iterator ALL1 [QI QQ UQQ])
(define_mode_iterator ALL2 [HI HQ UHQ HA UHA])
(define_mode_iterator ALL4 [SI SQ USQ SA USA])
;; All supported move-modes
(define_mode_iterator MOVMODE [QI QQ UQQ
HI HQ UHQ HA UHA
SI SQ USQ SA USA
SF PSI])
;; Supported ordered modes that are 2, 3, 4 bytes wide
(define_mode_iterator ORDERED234 [HI SI PSI
HQ UHQ HA UHA
SQ USQ SA USA])
;; Post-reload split of 3, 4 bytes wide moves.
(define_mode_iterator SPLIT34 [SI SF PSI
SQ USQ SA USA])
;; Define code iterators
;; Define two incarnations so that we can build the cross product.
(define_code_iterator any_extend [sign_extend zero_extend])
(define_code_iterator any_extend2 [sign_extend zero_extend])
(define_code_iterator any_extract [sign_extract zero_extract])
(define_code_iterator any_shiftrt [lshiftrt ashiftrt])
(define_code_iterator bitop [xor ior and])
(define_code_iterator xior [xor ior])
(define_code_iterator eqne [eq ne])
(define_code_iterator ss_addsub [ss_plus ss_minus])
(define_code_iterator us_addsub [us_plus us_minus])
(define_code_iterator ss_abs_neg [ss_abs ss_neg])
;; Define code attributes
(define_code_attr extend_su
[(sign_extend "s")
(zero_extend "u")])
(define_code_attr extend_u
[(sign_extend "")
(zero_extend "u")])
(define_code_attr extend_s
[(sign_extend "s")
(zero_extend "")])
;; Constrain input operand of widening multiply, i.e. MUL resp. MULS.
(define_code_attr mul_r_d
[(zero_extend "r")
(sign_extend "d")])
(define_code_attr abelian
[(ss_minus "") (us_minus "")
(ss_plus "%") (us_plus "%")])
;; Map RTX code to its standard insn name
(define_code_attr code_stdname
[(ashift "ashl")
(ashiftrt "ashr")
(lshiftrt "lshr")
(ior "ior")
(xor "xor")
(rotate "rotl")
(ss_plus "ssadd") (ss_minus "sssub") (ss_neg "ssneg") (ss_abs "ssabs")
(us_plus "usadd") (us_minus "ussub") (us_neg "usneg")
])
;;========================================================================
;; The following is used by nonlocal_goto and setjmp.
;; The receiver pattern will create no instructions since internally
;; virtual_stack_vars = hard_frame_pointer + 1 so the RTL become R28=R28
;; This avoids creating add/sub offsets in frame_pointer save/resore.
;; The 'null' receiver also avoids problems with optimisation
;; not recognising incoming jmp and removing code that resets frame_pointer.
;; The code derived from builtins.c.
(define_expand "nonlocal_goto_receiver"
[(set (reg:HI REG_Y)
(unspec_volatile:HI [(const_int 0)] UNSPECV_GOTO_RECEIVER))]
""
{
emit_move_insn (virtual_stack_vars_rtx,
gen_rtx_PLUS (Pmode, hard_frame_pointer_rtx,
gen_int_mode (STARTING_FRAME_OFFSET,
Pmode)));
/* ; This might change the hard frame pointer in ways that aren't
; apparent to early optimization passes, so force a clobber. */
emit_clobber (hard_frame_pointer_rtx);
DONE;
})
;; Defining nonlocal_goto_receiver means we must also define this.
;; even though its function is identical to that in builtins.c
(define_expand "nonlocal_goto"
[(use (match_operand 0 "general_operand"))
(use (match_operand 1 "general_operand"))
(use (match_operand 2 "general_operand"))
(use (match_operand 3 "general_operand"))]
""
{
rtx r_label = copy_to_reg (operands[1]);
rtx r_fp = operands[3];
rtx r_sp = operands[2];
emit_clobber (gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (VOIDmode)));
emit_clobber (gen_rtx_MEM (BLKmode, hard_frame_pointer_rtx));
emit_move_insn (hard_frame_pointer_rtx, r_fp);
emit_stack_restore (SAVE_NONLOCAL, r_sp);
emit_use (hard_frame_pointer_rtx);
emit_use (stack_pointer_rtx);
emit_indirect_jump (r_label);
DONE;
})
;; "pushqi1"
;; "pushqq1" "pushuqq1"
(define_insn "push1"
[(set (mem:ALL1 (post_dec:HI (reg:HI REG_SP)))
(match_operand:ALL1 0 "reg_or_0_operand" "r,Y00"))]
""
"@
push %0
push __zero_reg__"
[(set_attr "length" "1,1")])
(define_insn "pushhi1_insn"
[(set (mem:HI (post_dec:HI (reg:HI REG_SP)))
(match_operand:HI 0 "register_operand" "r"))]
""
"push %B0\;push %A0"
[(set_attr "length" "2")])
;; All modes for a multi-byte push. We must include complex modes here too,
;; lest emit_single_push_insn "helpfully" create the auto-inc itself.
(define_mode_iterator MPUSH
[CQI
HI CHI HA UHA HQ UHQ
SI CSI SA USA SQ USQ
DI CDI DA UDA DQ UDQ
TA UTA
SF SC
PSI])
(define_expand "push1"
[(match_operand:MPUSH 0 "" "")]
""
{
if (MEM_P (operands[0])
&& !ADDR_SPACE_GENERIC_P (MEM_ADDR_SPACE (operands[0])))
{
// Avoid (subreg (mem)) for non-generic address spaces. Because
// of the poor addressing capabilities of these spaces it's better to
// load them in one chunk. And it avoids PR61443.
operands[0] = copy_to_mode_reg (mode, operands[0]);
}
else if (REG_P (operands[0])
&& IN_RANGE (REGNO (operands[0]), FIRST_VIRTUAL_REGISTER,
LAST_VIRTUAL_REGISTER))
{
// Byte-wise pushing of virtual regs might result in something like
//
// (set (mem:QI (post_dec:HI (reg:HI 32 SP)))
// (subreg:QI (plus:HI (reg:HI 28)
// (const_int 17)) 0))
//
// after elimination. This cannot be handled by reload, cf. PR64452.
// Reload virtuals in one chunk. That way it's possible to reload
// above situation and finally
//
// (set (reg:HI **)
// (const_int 17))
// (set (reg:HI **)
// (plus:HI (reg:HI **)
// (reg:HI 28)))
// (set (mem:HI (post_dec:HI (reg:HI 32 SP))
// (reg:HI **)))
emit_insn (gen_pushhi1_insn (operands[0]));
DONE;
}
for (int i = GET_MODE_SIZE (mode) - 1; i >= 0; --i)
{
rtx part = simplify_gen_subreg (QImode, operands[0], mode, i);
if (part != const0_rtx)
part = force_reg (QImode, part);
emit_insn (gen_pushqi1 (part));
}
DONE;
})
;; Notice a special-case when adding N to SP where N results in a
;; zero REG_ARGS_SIZE. This is equivalent to a move from FP.
(define_split
[(set (reg:HI REG_SP)
(match_operand:HI 0 "register_operand" ""))]
"reload_completed
&& frame_pointer_needed
&& !cfun->calls_alloca
&& find_reg_note (insn, REG_ARGS_SIZE, const0_rtx)"
[(set (reg:HI REG_SP)
(reg:HI REG_Y))])
;;========================================================================
;; Move stuff around
;; "loadqi_libgcc"
;; "loadhi_libgcc"
;; "loadpsi_libgcc"
;; "loadsi_libgcc"
;; "loadsf_libgcc"
(define_expand "load_libgcc"
[(set (match_dup 3)
(match_dup 2))
(set (reg:MOVMODE 22)
(match_operand:MOVMODE 1 "memory_operand" ""))
(set (match_operand:MOVMODE 0 "register_operand" "")
(reg:MOVMODE 22))]
"avr_load_libgcc_p (operands[1])"
{
operands[3] = gen_rtx_REG (HImode, REG_Z);
operands[2] = force_operand (XEXP (operands[1], 0), NULL_RTX);
operands[1] = replace_equiv_address (operands[1], operands[3]);
set_mem_addr_space (operands[1], ADDR_SPACE_FLASH);
})
;; "load_qi_libgcc"
;; "load_hi_libgcc"
;; "load_psi_libgcc"
;; "load_si_libgcc"
;; "load_sf_libgcc"
(define_insn "load__libgcc"
[(set (reg:MOVMODE 22)
(match_operand:MOVMODE 0 "memory_operand" "m,m"))]
"avr_load_libgcc_p (operands[0])
&& REG_P (XEXP (operands[0], 0))
&& REG_Z == REGNO (XEXP (operands[0], 0))"
{
operands[0] = GEN_INT (GET_MODE_SIZE (mode));
return "%~call __load_%0";
}
[(set_attr "length" "1,2")
(set_attr "isa" "rjmp,jmp")
(set_attr "cc" "clobber")])
;; "xload8qi_A"
;; "xload8qq_A" "xload8uqq_A"
(define_insn_and_split "xload8_A"
[(set (match_operand:ALL1 0 "register_operand" "=r")
(match_operand:ALL1 1 "memory_operand" "m"))
(clobber (reg:HI REG_Z))]
"can_create_pseudo_p()
&& !avr_xload_libgcc_p (mode)
&& avr_mem_memx_p (operands[1])
&& REG_P (XEXP (operands[1], 0))"
{ gcc_unreachable(); }
"&& 1"
[(clobber (const_int 0))]
{
/* ; Split away the high part of the address. GCC's register allocator
; in not able to allocate segment registers and reload the resulting
; expressions. Notice that no address register can hold a PSImode. */
rtx_insn *insn;
rtx addr = XEXP (operands[1], 0);
rtx hi8 = gen_reg_rtx (QImode);
rtx reg_z = gen_rtx_REG (HImode, REG_Z);
emit_move_insn (reg_z, simplify_gen_subreg (HImode, addr, PSImode, 0));
emit_move_insn (hi8, simplify_gen_subreg (QImode, addr, PSImode, 2));
insn = emit_insn (gen_xload_8 (operands[0], hi8));
set_mem_addr_space (SET_SRC (single_set (insn)),
MEM_ADDR_SPACE (operands[1]));
DONE;
})
;; "xloadqi_A" "xloadqq_A" "xloaduqq_A"
;; "xloadhi_A" "xloadhq_A" "xloaduhq_A" "xloadha_A" "xloaduha_A"
;; "xloadsi_A" "xloadsq_A" "xloadusq_A" "xloadsa_A" "xloadusa_A"
;; "xloadpsi_A"
;; "xloadsf_A"
(define_insn_and_split "xload_A"
[(set (match_operand:MOVMODE 0 "register_operand" "=r")
(match_operand:MOVMODE 1 "memory_operand" "m"))
(clobber (reg:MOVMODE 22))
(clobber (reg:QI 21))
(clobber (reg:HI REG_Z))]
"can_create_pseudo_p()
&& avr_mem_memx_p (operands[1])
&& REG_P (XEXP (operands[1], 0))"
{ gcc_unreachable(); }
"&& 1"
[(clobber (const_int 0))]
{
rtx addr = XEXP (operands[1], 0);
rtx reg_z = gen_rtx_REG (HImode, REG_Z);
rtx addr_hi8 = simplify_gen_subreg (QImode, addr, PSImode, 2);
addr_space_t as = MEM_ADDR_SPACE (operands[1]);
rtx_insn *insn;
/* Split the address to R21:Z */
emit_move_insn (reg_z, simplify_gen_subreg (HImode, addr, PSImode, 0));
emit_move_insn (gen_rtx_REG (QImode, 21), addr_hi8);
/* Load with code from libgcc */
insn = emit_insn (gen_xload__libgcc ());
set_mem_addr_space (SET_SRC (single_set (insn)), as);
/* Move to destination */
emit_move_insn (operands[0], gen_rtx_REG (mode, 22));
DONE;
})
;; Move value from address space memx to a register
;; These insns must be prior to respective generic move insn.
;; "xloadqi_8"
;; "xloadqq_8" "xloaduqq_8"
(define_insn "xload_8"
[(set (match_operand:ALL1 0 "register_operand" "=&r,r")
(mem:ALL1 (lo_sum:PSI (match_operand:QI 1 "register_operand" "r,r")
(reg:HI REG_Z))))]
"!avr_xload_libgcc_p (mode)"
{
return avr_out_xload (insn, operands, NULL);
}
[(set_attr "length" "4,4")
(set_attr "adjust_len" "*,xload")
(set_attr "isa" "lpmx,lpm")
(set_attr "cc" "none")])
;; R21:Z : 24-bit source address
;; R22 : 1-4 byte output
;; "xload_qi_libgcc" "xload_qq_libgcc" "xload_uqq_libgcc"
;; "xload_hi_libgcc" "xload_hq_libgcc" "xload_uhq_libgcc" "xload_ha_libgcc" "xload_uha_libgcc"
;; "xload_si_libgcc" "xload_sq_libgcc" "xload_usq_libgcc" "xload_sa_libgcc" "xload_usa_libgcc"
;; "xload_sf_libgcc"
;; "xload_psi_libgcc"
(define_insn "xload__libgcc"
[(set (reg:MOVMODE 22)
(mem:MOVMODE (lo_sum:PSI (reg:QI 21)
(reg:HI REG_Z))))
(clobber (reg:QI 21))
(clobber (reg:HI REG_Z))]
"avr_xload_libgcc_p (mode)"
{
rtx x_bytes = GEN_INT (GET_MODE_SIZE (mode));
output_asm_insn ("%~call __xload_%0", &x_bytes);
return "";
}
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; General move expanders
;; "movqi" "movqq" "movuqq"
;; "movhi" "movhq" "movuhq" "movha" "movuha"
;; "movsi" "movsq" "movusq" "movsa" "movusa"
;; "movsf"
;; "movpsi"
(define_expand "mov"
[(set (match_operand:MOVMODE 0 "nonimmediate_operand" "")
(match_operand:MOVMODE 1 "general_operand" ""))]
""
{
rtx dest = operands[0];
rtx src = avr_eval_addr_attrib (operands[1]);
if (avr_mem_flash_p (dest))
DONE;
if (QImode == mode
&& SUBREG_P (src)
&& CONSTANT_ADDRESS_P (SUBREG_REG (src))
&& can_create_pseudo_p())
{
// store_bitfield may want to store a SYMBOL_REF or CONST in a
// structure that's represented as PSImode. As the upper 16 bits
// of PSImode cannot be expressed as an HImode subreg, the rhs is
// decomposed into QImode (word_mode) subregs of SYMBOL_REF,
// CONST or LABEL_REF; cf. PR71103.
rtx const_addr = SUBREG_REG (src);
operands[1] = src = copy_rtx (src);
SUBREG_REG (src) = copy_to_mode_reg (GET_MODE (const_addr), const_addr);
}
/* One of the operands has to be in a register. */
if (!register_operand (dest, mode)
&& !reg_or_0_operand (src, mode))
{
operands[1] = src = copy_to_mode_reg (mode, src);
}
if (avr_mem_memx_p (src))
{
rtx addr = XEXP (src, 0);
if (!REG_P (addr))
src = replace_equiv_address (src, copy_to_mode_reg (PSImode, addr));
if (!avr_xload_libgcc_p (mode))
/* ; No here because gen_xload8_A only iterates over ALL1.
; insn-emit does not depend on the mode, it's all about operands. */
emit_insn (gen_xload8qi_A (dest, src));
else
emit_insn (gen_xload_A (dest, src));
DONE;
}
if (avr_load_libgcc_p (src))
{
/* For the small devices, do loads per libgcc call. */
emit_insn (gen_load_libgcc (dest, src));
DONE;
}
})
;;========================================================================
;; move byte
;; The last alternative (any immediate constant to any register) is
;; very expensive. It should be optimized by peephole2 if a scratch
;; register is available, but then that register could just as well be
;; allocated for the variable we are loading. But, most of NO_LD_REGS
;; are call-saved registers, and most of LD_REGS are call-used registers,
;; so this may still be a win for registers live across function calls.
;; "movqi_insn"
;; "movqq_insn" "movuqq_insn"
(define_insn "mov_insn"
[(set (match_operand:ALL1 0 "nonimmediate_operand" "=r ,d ,Qm ,r ,q,r,*r")
(match_operand:ALL1 1 "nox_general_operand" "r Y00,n Ynn,r Y00,Qm,r,q,i"))]
"register_operand (operands[0], mode)
|| reg_or_0_operand (operands[1], mode)"
{
return output_movqi (insn, operands, NULL);
}
[(set_attr "length" "1,1,5,5,1,1,4")
(set_attr "adjust_len" "mov8")
(set_attr "cc" "ldi,none,clobber,clobber,none,none,clobber")])
;; This is used in peephole2 to optimize loading immediate constants
;; if a scratch register from LD_REGS happens to be available.
;; "*reload_inqi"
;; "*reload_inqq" "*reload_inuqq"
(define_insn "*reload_in"
[(set (match_operand:ALL1 0 "register_operand" "=l")
(match_operand:ALL1 1 "const_operand" "i"))
(clobber (match_operand:QI 2 "register_operand" "=&d"))]
"reload_completed"
"ldi %2,lo8(%1)
mov %0,%2"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_peephole2
[(match_scratch:QI 2 "d")
(set (match_operand:ALL1 0 "l_register_operand" "")
(match_operand:ALL1 1 "const_operand" ""))]
; No need for a clobber reg for 0x0, 0x01 or 0xff
"!satisfies_constraint_Y00 (operands[1])
&& !satisfies_constraint_Y01 (operands[1])
&& !satisfies_constraint_Ym1 (operands[1])"
[(parallel [(set (match_dup 0)
(match_dup 1))
(clobber (match_dup 2))])])
;;============================================================================
;; move word (16 bit)
;; Move register $1 to the Stack Pointer register SP.
;; This insn is emit during function prologue/epilogue generation.
;; $2 = 0: We know that IRQs are off
;; $2 = 1: We know that IRQs are on
;; $2 = 2: SP has 8 bits only, IRQ state does not matter
;; $2 = -1: We don't know anything about IRQ on/off
;; Always write SP via unspec, see PR50063
(define_insn "movhi_sp_r"
[(set (match_operand:HI 0 "stack_register_operand" "=q,q,q,q,q")
(unspec_volatile:HI [(match_operand:HI 1 "register_operand" "r,r,r,r,r")
(match_operand:HI 2 "const_int_operand" "L,P,N,K,LPN")]
UNSPECV_WRITE_SP))]
""
"@
out %B0,%B1\;out %A0,%A1
cli\;out %B0,%B1\;sei\;out %A0,%A1
in __tmp_reg__,__SREG__\;cli\;out %B0,%B1\;out __SREG__,__tmp_reg__\;out %A0,%A1
out %A0,%A1
out %A0,%A1\;out %B0,%B1"
[(set_attr "length" "2,4,5,1,2")
(set_attr "isa" "no_xmega,no_xmega,no_xmega,*,xmega")
(set_attr "cc" "none")])
(define_peephole2
[(match_scratch:QI 2 "d")
(set (match_operand:ALL2 0 "l_register_operand" "")
(match_operand:ALL2 1 "const_or_immediate_operand" ""))]
"operands[1] != CONST0_RTX (mode)"
[(parallel [(set (match_dup 0)
(match_dup 1))
(clobber (match_dup 2))])])
;; '*' because it is not used in rtl generation, only in above peephole
;; "*reload_inhi"
;; "*reload_inhq" "*reload_inuhq"
;; "*reload_inha" "*reload_inuha"
(define_insn "*reload_in"
[(set (match_operand:ALL2 0 "l_register_operand" "=l")
(match_operand:ALL2 1 "immediate_operand" "i"))
(clobber (match_operand:QI 2 "register_operand" "=&d"))]
"reload_completed"
{
return output_reload_inhi (operands, operands[2], NULL);
}
[(set_attr "length" "4")
(set_attr "adjust_len" "reload_in16")
(set_attr "cc" "clobber")])
;; "*movhi"
;; "*movhq" "*movuhq"
;; "*movha" "*movuha"
(define_insn "*mov"
[(set (match_operand:ALL2 0 "nonimmediate_operand" "=r,r ,r,m ,d,*r,q,r")
(match_operand:ALL2 1 "nox_general_operand" "r,Y00,m,r Y00,i,i ,r,q"))]
"register_operand (operands[0], mode)
|| reg_or_0_operand (operands[1], mode)"
{
return output_movhi (insn, operands, NULL);
}
[(set_attr "length" "2,2,6,7,2,6,5,2")
(set_attr "adjust_len" "mov16")
(set_attr "cc" "none,none,clobber,clobber,none,clobber,none,none")])
(define_peephole2 ; movw
[(set (match_operand:ALL1 0 "even_register_operand" "")
(match_operand:ALL1 1 "even_register_operand" ""))
(set (match_operand:ALL1 2 "odd_register_operand" "")
(match_operand:ALL1 3 "odd_register_operand" ""))]
"AVR_HAVE_MOVW
&& REGNO (operands[0]) == REGNO (operands[2]) - 1
&& REGNO (operands[1]) == REGNO (operands[3]) - 1"
[(set (match_dup 4)
(match_dup 5))]
{
operands[4] = gen_rtx_REG (HImode, REGNO (operands[0]));
operands[5] = gen_rtx_REG (HImode, REGNO (operands[1]));
})
(define_peephole2 ; movw_r
[(set (match_operand:ALL1 0 "odd_register_operand" "")
(match_operand:ALL1 1 "odd_register_operand" ""))
(set (match_operand:ALL1 2 "even_register_operand" "")
(match_operand:ALL1 3 "even_register_operand" ""))]
"AVR_HAVE_MOVW
&& REGNO (operands[2]) == REGNO (operands[0]) - 1
&& REGNO (operands[3]) == REGNO (operands[1]) - 1"
[(set (match_dup 4)
(match_dup 5))]
{
operands[4] = gen_rtx_REG (HImode, REGNO (operands[2]));
operands[5] = gen_rtx_REG (HImode, REGNO (operands[3]));
})
;; For LPM loads from AS1 we split
;; R = *Z
;; to
;; R = *Z++
;; Z = Z - sizeof (R)
;;
;; so that the second instruction can be optimized out.
(define_split ; "split-lpmx"
[(set (match_operand:HISI 0 "register_operand" "")
(match_operand:HISI 1 "memory_operand" ""))]
"reload_completed
&& AVR_HAVE_LPMX"
[(set (match_dup 0)
(match_dup 2))
(set (match_dup 3)
(plus:HI (match_dup 3)
(match_dup 4)))]
{
rtx addr = XEXP (operands[1], 0);
if (!avr_mem_flash_p (operands[1])
|| !REG_P (addr)
|| reg_overlap_mentioned_p (addr, operands[0]))
{
FAIL;
}
operands[2] = replace_equiv_address (operands[1],
gen_rtx_POST_INC (Pmode, addr));
operands[3] = addr;
operands[4] = gen_int_mode (-GET_MODE_SIZE (mode), HImode);
})
;;==========================================================================
;; xpointer move (24 bit)
(define_peephole2 ; *reload_inpsi
[(match_scratch:QI 2 "d")
(set (match_operand:PSI 0 "l_register_operand" "")
(match_operand:PSI 1 "immediate_operand" ""))
(match_dup 2)]
"operands[1] != const0_rtx
&& operands[1] != constm1_rtx"
[(parallel [(set (match_dup 0)
(match_dup 1))
(clobber (match_dup 2))])])
;; '*' because it is not used in rtl generation.
(define_insn "*reload_inpsi"
[(set (match_operand:PSI 0 "register_operand" "=r")
(match_operand:PSI 1 "immediate_operand" "i"))
(clobber (match_operand:QI 2 "register_operand" "=&d"))]
"reload_completed"
{
return avr_out_reload_inpsi (operands, operands[2], NULL);
}
[(set_attr "length" "6")
(set_attr "adjust_len" "reload_in24")
(set_attr "cc" "clobber")])
(define_insn "*movpsi"
[(set (match_operand:PSI 0 "nonimmediate_operand" "=r,r,r ,Qm,!d,r")
(match_operand:PSI 1 "nox_general_operand" "r,L,Qm,rL,i ,i"))]
"register_operand (operands[0], PSImode)
|| register_operand (operands[1], PSImode)
|| const0_rtx == operands[1]"
{
return avr_out_movpsi (insn, operands, NULL);
}
[(set_attr "length" "3,3,8,9,4,10")
(set_attr "adjust_len" "mov24")
(set_attr "cc" "none,none,clobber,clobber,none,clobber")])
;;==========================================================================
;; move double word (32 bit)
(define_peephole2 ; *reload_insi
[(match_scratch:QI 2 "d")
(set (match_operand:ALL4 0 "l_register_operand" "")
(match_operand:ALL4 1 "immediate_operand" ""))
(match_dup 2)]
"operands[1] != CONST0_RTX (mode)"
[(parallel [(set (match_dup 0)
(match_dup 1))
(clobber (match_dup 2))])])
;; '*' because it is not used in rtl generation.
;; "*reload_insi"
;; "*reload_insq" "*reload_inusq"
;; "*reload_insa" "*reload_inusa"
(define_insn "*reload_insi"
[(set (match_operand:ALL4 0 "register_operand" "=r")
(match_operand:ALL4 1 "immediate_operand" "n Ynn"))
(clobber (match_operand:QI 2 "register_operand" "=&d"))]
"reload_completed"
{
return output_reload_insisf (operands, operands[2], NULL);
}
[(set_attr "length" "8")
(set_attr "adjust_len" "reload_in32")
(set_attr "cc" "clobber")])
;; "*movsi"
;; "*movsq" "*movusq"
;; "*movsa" "*movusa"
(define_insn "*mov"
[(set (match_operand:ALL4 0 "nonimmediate_operand" "=r,r ,r ,Qm ,!d,r")
(match_operand:ALL4 1 "nox_general_operand" "r,Y00,Qm,r Y00,i ,i"))]
"register_operand (operands[0], mode)
|| reg_or_0_operand (operands[1], mode)"
{
return output_movsisf (insn, operands, NULL);
}
[(set_attr "length" "4,4,8,9,4,10")
(set_attr "adjust_len" "mov32")
(set_attr "cc" "none,none,clobber,clobber,none,clobber")])
;; fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
;; move floating point numbers (32 bit)
(define_insn "*movsf"
[(set (match_operand:SF 0 "nonimmediate_operand" "=r,r,r ,Qm,!d,r")
(match_operand:SF 1 "nox_general_operand" "r,G,Qm,rG,F ,F"))]
"register_operand (operands[0], SFmode)
|| reg_or_0_operand (operands[1], SFmode)"
{
return output_movsisf (insn, operands, NULL);
}
[(set_attr "length" "4,4,8,9,4,10")
(set_attr "adjust_len" "mov32")
(set_attr "cc" "none,none,clobber,clobber,none,clobber")])
(define_peephole2 ; *reload_insf
[(match_scratch:QI 2 "d")
(set (match_operand:SF 0 "l_register_operand" "")
(match_operand:SF 1 "const_double_operand" ""))
(match_dup 2)]
"operands[1] != CONST0_RTX (SFmode)"
[(parallel [(set (match_dup 0)
(match_dup 1))
(clobber (match_dup 2))])])
;; '*' because it is not used in rtl generation.
(define_insn "*reload_insf"
[(set (match_operand:SF 0 "register_operand" "=r")
(match_operand:SF 1 "const_double_operand" "F"))
(clobber (match_operand:QI 2 "register_operand" "=&d"))]
"reload_completed"
{
return output_reload_insisf (operands, operands[2], NULL);
}
[(set_attr "length" "8")
(set_attr "adjust_len" "reload_in32")
(set_attr "cc" "clobber")])
;;=========================================================================
;; move string (like memcpy)
(define_expand "movmemhi"
[(parallel [(set (match_operand:BLK 0 "memory_operand" "")
(match_operand:BLK 1 "memory_operand" ""))
(use (match_operand:HI 2 "const_int_operand" ""))
(use (match_operand:HI 3 "const_int_operand" ""))])]
""
{
if (avr_emit_movmemhi (operands))
DONE;
FAIL;
})
(define_mode_attr MOVMEM_r_d [(QI "r")
(HI "wd")])
;; $0 : Address Space
;; $1, $2 : Loop register
;; R30 : source address
;; R26 : destination address
;; "movmem_qi"
;; "movmem_hi"
(define_insn "movmem_"
[(set (mem:BLK (reg:HI REG_X))
(mem:BLK (reg:HI REG_Z)))
(unspec [(match_operand:QI 0 "const_int_operand" "n")]
UNSPEC_MOVMEM)
(use (match_operand:QIHI 1 "register_operand" ""))
(clobber (reg:HI REG_X))
(clobber (reg:HI REG_Z))
(clobber (reg:QI LPM_REGNO))
(clobber (match_operand:QIHI 2 "register_operand" "=1"))]
""
{
return avr_out_movmem (insn, operands, NULL);
}
[(set_attr "adjust_len" "movmem")
(set_attr "cc" "clobber")])
;; $0 : Address Space
;; $1 : RAMPZ RAM address
;; R24 : #bytes and loop register
;; R23:Z : 24-bit source address
;; R26 : 16-bit destination address
;; "movmemx_qi"
;; "movmemx_hi"
(define_insn "movmemx_"
[(set (mem:BLK (reg:HI REG_X))
(mem:BLK (lo_sum:PSI (reg:QI 23)
(reg:HI REG_Z))))
(unspec [(match_operand:QI 0 "const_int_operand" "n")]
UNSPEC_MOVMEM)
(use (reg:QIHI 24))
(clobber (reg:HI REG_X))
(clobber (reg:HI REG_Z))
(clobber (reg:QI LPM_REGNO))
(clobber (reg:HI 24))
(clobber (reg:QI 23))
(clobber (mem:QI (match_operand:QI 1 "io_address_operand" "n")))]
""
"%~call __movmemx_"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2
;; memset (%0, %2, %1)
(define_expand "setmemhi"
[(parallel [(set (match_operand:BLK 0 "memory_operand" "")
(match_operand 2 "const_int_operand" ""))
(use (match_operand:HI 1 "const_int_operand" ""))
(use (match_operand:HI 3 "const_int_operand" ""))
(clobber (match_scratch:HI 5 ""))
(clobber (match_dup 4))])]
""
{
rtx addr0;
machine_mode mode;
/* If value to set is not zero, use the library routine. */
if (operands[2] != const0_rtx)
FAIL;
if (!CONST_INT_P (operands[1]))
FAIL;
mode = u8_operand (operands[1], VOIDmode) ? QImode : HImode;
operands[4] = gen_rtx_SCRATCH (mode);
operands[1] = copy_to_mode_reg (mode,
gen_int_mode (INTVAL (operands[1]), mode));
addr0 = copy_to_mode_reg (Pmode, XEXP (operands[0], 0));
operands[0] = gen_rtx_MEM (BLKmode, addr0);
})
(define_insn "*clrmemqi"
[(set (mem:BLK (match_operand:HI 0 "register_operand" "e"))
(const_int 0))
(use (match_operand:QI 1 "register_operand" "r"))
(use (match_operand:QI 2 "const_int_operand" "n"))
(clobber (match_scratch:HI 3 "=0"))
(clobber (match_scratch:QI 4 "=&1"))]
""
"0:\;st %a0+,__zero_reg__\;dec %1\;brne 0b"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_insn "*clrmemhi"
[(set (mem:BLK (match_operand:HI 0 "register_operand" "e,e"))
(const_int 0))
(use (match_operand:HI 1 "register_operand" "!w,d"))
(use (match_operand:HI 2 "const_int_operand" "n,n"))
(clobber (match_scratch:HI 3 "=0,0"))
(clobber (match_scratch:HI 4 "=&1,&1"))]
""
"@
0:\;st %a0+,__zero_reg__\;sbiw %A1,1\;brne 0b
0:\;st %a0+,__zero_reg__\;subi %A1,1\;sbci %B1,0\;brne 0b"
[(set_attr "length" "3,4")
(set_attr "cc" "clobber,clobber")])
(define_expand "strlenhi"
[(set (match_dup 4)
(unspec:HI [(match_operand:BLK 1 "memory_operand" "")
(match_operand:QI 2 "const_int_operand" "")
(match_operand:HI 3 "immediate_operand" "")]
UNSPEC_STRLEN))
(set (match_dup 4)
(plus:HI (match_dup 4)
(const_int -1)))
(parallel [(set (match_operand:HI 0 "register_operand" "")
(minus:HI (match_dup 4)
(match_dup 5)))
(clobber (scratch:QI))])]
""
{
rtx addr;
if (operands[2] != const0_rtx)
FAIL;
addr = copy_to_mode_reg (Pmode, XEXP (operands[1], 0));
operands[1] = gen_rtx_MEM (BLKmode, addr);
operands[5] = addr;
operands[4] = gen_reg_rtx (HImode);
})
(define_insn "*strlenhi"
[(set (match_operand:HI 0 "register_operand" "=e")
(unspec:HI [(mem:BLK (match_operand:HI 1 "register_operand" "0"))
(const_int 0)
(match_operand:HI 2 "immediate_operand" "i")]
UNSPEC_STRLEN))]
""
"0:\;ld __tmp_reg__,%a0+\;tst __tmp_reg__\;brne 0b"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
; add bytes
;; "addqi3"
;; "addqq3" "adduqq3"
(define_insn "add3"
[(set (match_operand:ALL1 0 "register_operand" "=r,d ,r ,r ,r ,r")
(plus:ALL1 (match_operand:ALL1 1 "register_operand" "%0,0 ,0 ,0 ,0 ,0")
(match_operand:ALL1 2 "nonmemory_operand" "r,n Ynn,Y01,Ym1,Y02,Ym2")))]
""
"@
add %0,%2
subi %0,lo8(-(%2))
inc %0
dec %0
inc %0\;inc %0
dec %0\;dec %0"
[(set_attr "length" "1,1,1,1,2,2")
(set_attr "cc" "set_czn,set_czn,set_vzn,set_vzn,set_vzn,set_vzn")])
;; "addhi3"
;; "addhq3" "adduhq3"
;; "addha3" "adduha3"
(define_expand "add3"
[(set (match_operand:ALL2 0 "register_operand" "")
(plus:ALL2 (match_operand:ALL2 1 "register_operand" "")
(match_operand:ALL2 2 "nonmemory_or_const_operand" "")))]
""
{
if (CONST_INT_P (operands[2]))
{
operands[2] = gen_int_mode (INTVAL (operands[2]), HImode);
if (can_create_pseudo_p()
&& !stack_register_operand (operands[0], HImode)
&& !stack_register_operand (operands[1], HImode)
&& !d_register_operand (operands[0], HImode)
&& !d_register_operand (operands[1], HImode))
{
emit_insn (gen_addhi3_clobber (operands[0], operands[1], operands[2]));
DONE;
}
}
if (CONST_FIXED_P (operands[2]))
{
emit_insn (gen_add3_clobber (operands[0], operands[1], operands[2]));
DONE;
}
})
(define_insn "*addhi3_zero_extend"
[(set (match_operand:HI 0 "register_operand" "=r,*?r")
(plus:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "r ,0"))
(match_operand:HI 2 "register_operand" "0 ,r")))]
""
"@
add %A0,%1\;adc %B0,__zero_reg__
add %A0,%A2\;mov %B0,%B2\;adc %B0,__zero_reg__"
[(set_attr "length" "2,3")
(set_attr "cc" "set_n")])
(define_insn "*addhi3_zero_extend1"
[(set (match_operand:HI 0 "register_operand" "=r")
(plus:HI (match_operand:HI 1 "register_operand" "0")
(zero_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
""
"add %A0,%2\;adc %B0,__zero_reg__"
[(set_attr "length" "2")
(set_attr "cc" "set_n")])
(define_insn "*addhi3.sign_extend1"
[(set (match_operand:HI 0 "register_operand" "=r")
(plus:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "r"))
(match_operand:HI 2 "register_operand" "0")))]
""
{
return reg_overlap_mentioned_p (operands[0], operands[1])
? "mov __tmp_reg__,%1\;add %A0,%1\;adc %B0,__zero_reg__\;sbrc __tmp_reg__,7\;dec %B0"
: "add %A0,%1\;adc %B0,__zero_reg__\;sbrc %1,7\;dec %B0";
}
[(set_attr "length" "5")
(set_attr "cc" "clobber")])
(define_insn "*addhi3_zero_extend.const"
[(set (match_operand:HI 0 "register_operand" "=d")
(plus:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "0"))
(match_operand:HI 2 "const_m255_to_m1_operand" "Cn8")))]
""
"subi %A0,%n2\;sbc %B0,%B0"
[(set_attr "length" "2")
(set_attr "cc" "set_czn")])
(define_insn "*usum_widenqihi3"
[(set (match_operand:HI 0 "register_operand" "=r")
(plus:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "0"))
(zero_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
""
"add %A0,%2\;clr %B0\;rol %B0"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_insn "*udiff_widenqihi3"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "0"))
(zero_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
""
"sub %A0,%2\;sbc %B0,%B0"
[(set_attr "length" "2")
(set_attr "cc" "set_czn")])
(define_insn "*addhi3_sp"
[(set (match_operand:HI 1 "stack_register_operand" "=q")
(plus:HI (match_operand:HI 2 "stack_register_operand" "q")
(match_operand:HI 0 "avr_sp_immediate_operand" "Csp")))]
""
{
return avr_out_addto_sp (operands, NULL);
}
[(set_attr "length" "6")
(set_attr "adjust_len" "addto_sp")])
;; "*addhi3"
;; "*addhq3" "*adduhq3"
;; "*addha3" "*adduha3"
(define_insn "*add3"
[(set (match_operand:ALL2 0 "register_operand" "=??r,d,!w ,d")
(plus:ALL2 (match_operand:ALL2 1 "register_operand" "%0,0,0 ,0")
(match_operand:ALL2 2 "nonmemory_or_const_operand" "r,s,IJ YIJ,n Ynn")))]
""
{
return avr_out_plus (insn, operands);
}
[(set_attr "length" "2")
(set_attr "adjust_len" "plus")
(set_attr "cc" "plus")])
;; Adding a constant to NO_LD_REGS might have lead to a reload of
;; that constant to LD_REGS. We don't add a scratch to *addhi3
;; itself because that insn is special to reload.
(define_peephole2 ; addhi3_clobber
[(set (match_operand:ALL2 0 "d_register_operand" "")
(match_operand:ALL2 1 "const_operand" ""))
(set (match_operand:ALL2 2 "l_register_operand" "")
(plus:ALL2 (match_dup 2)
(match_dup 0)))]
"peep2_reg_dead_p (2, operands[0])"
[(parallel [(set (match_dup 2)
(plus:ALL2 (match_dup 2)
(match_dup 1)))
(clobber (match_dup 3))])]
{
operands[3] = simplify_gen_subreg (QImode, operands[0], mode, 0);
})
;; Same, but with reload to NO_LD_REGS
;; Combine *reload_inhi with *addhi3
(define_peephole2 ; addhi3_clobber
[(parallel [(set (match_operand:ALL2 0 "l_register_operand" "")
(match_operand:ALL2 1 "const_operand" ""))
(clobber (match_operand:QI 2 "d_register_operand" ""))])
(set (match_operand:ALL2 3 "l_register_operand" "")
(plus:ALL2 (match_dup 3)
(match_dup 0)))]
"peep2_reg_dead_p (2, operands[0])"
[(parallel [(set (match_dup 3)
(plus:ALL2 (match_dup 3)
(match_dup 1)))
(clobber (match_dup 2))])])
;; "addhi3_clobber"
;; "addhq3_clobber" "adduhq3_clobber"
;; "addha3_clobber" "adduha3_clobber"
(define_insn "add3_clobber"
[(set (match_operand:ALL2 0 "register_operand" "=!w ,d ,r")
(plus:ALL2 (match_operand:ALL2 1 "register_operand" "%0 ,0 ,0")
(match_operand:ALL2 2 "const_operand" "IJ YIJ,n Ynn,n Ynn")))
(clobber (match_scratch:QI 3 "=X ,X ,&d"))]
""
{
return avr_out_plus (insn, operands);
}
[(set_attr "length" "4")
(set_attr "adjust_len" "plus")
(set_attr "cc" "plus")])
;; "addsi3"
;; "addsq3" "addusq3"
;; "addsa3" "addusa3"
(define_insn "add3"
[(set (match_operand:ALL4 0 "register_operand" "=??r,d ,r")
(plus:ALL4 (match_operand:ALL4 1 "register_operand" "%0,0 ,0")
(match_operand:ALL4 2 "nonmemory_operand" "r,i ,n Ynn")))
(clobber (match_scratch:QI 3 "=X,X ,&d"))]
""
{
return avr_out_plus (insn, operands);
}
[(set_attr "length" "4")
(set_attr "adjust_len" "plus")
(set_attr "cc" "plus")])
(define_insn "*addpsi3_zero_extend.qi"
[(set (match_operand:PSI 0 "register_operand" "=r")
(plus:PSI (zero_extend:PSI (match_operand:QI 1 "register_operand" "r"))
(match_operand:PSI 2 "register_operand" "0")))]
""
"add %A0,%A1\;adc %B0,__zero_reg__\;adc %C0,__zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "set_n")])
(define_insn "*addpsi3_zero_extend.hi"
[(set (match_operand:PSI 0 "register_operand" "=r")
(plus:PSI (zero_extend:PSI (match_operand:HI 1 "register_operand" "r"))
(match_operand:PSI 2 "register_operand" "0")))]
""
"add %A0,%A1\;adc %B0,%B1\;adc %C0,__zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "set_n")])
(define_insn "*addpsi3_sign_extend.hi"
[(set (match_operand:PSI 0 "register_operand" "=r")
(plus:PSI (sign_extend:PSI (match_operand:HI 1 "register_operand" "r"))
(match_operand:PSI 2 "register_operand" "0")))]
""
"add %A0,%1\;adc %B0,%B1\;adc %C0,__zero_reg__\;sbrc %B1,7\;dec %C0"
[(set_attr "length" "5")
(set_attr "cc" "set_n")])
(define_insn "*addsi3_zero_extend"
[(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (zero_extend:SI (match_operand:QI 1 "register_operand" "r"))
(match_operand:SI 2 "register_operand" "0")))]
""
"add %A0,%1\;adc %B0,__zero_reg__\;adc %C0,__zero_reg__\;adc %D0,__zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "set_n")])
(define_insn "*addsi3_zero_extend.hi"
[(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (zero_extend:SI (match_operand:HI 1 "register_operand" "r"))
(match_operand:SI 2 "register_operand" "0")))]
""
"add %A0,%1\;adc %B0,%B1\;adc %C0,__zero_reg__\;adc %D0,__zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "set_n")])
(define_insn "addpsi3"
[(set (match_operand:PSI 0 "register_operand" "=??r,d ,d,r")
(plus:PSI (match_operand:PSI 1 "register_operand" "%0,0 ,0,0")
(match_operand:PSI 2 "nonmemory_operand" "r,s ,n,n")))
(clobber (match_scratch:QI 3 "=X,X ,X,&d"))]
""
{
return avr_out_plus (insn, operands);
}
[(set_attr "length" "3")
(set_attr "adjust_len" "plus")
(set_attr "cc" "plus")])
(define_insn "subpsi3"
[(set (match_operand:PSI 0 "register_operand" "=r")
(minus:PSI (match_operand:PSI 1 "register_operand" "0")
(match_operand:PSI 2 "register_operand" "r")))]
""
"sub %0,%2\;sbc %B0,%B2\;sbc %C0,%C2"
[(set_attr "length" "3")
(set_attr "cc" "set_czn")])
(define_insn "*subpsi3_zero_extend.qi"
[(set (match_operand:PSI 0 "register_operand" "=r")
(minus:PSI (match_operand:SI 1 "register_operand" "0")
(zero_extend:PSI (match_operand:QI 2 "register_operand" "r"))))]
""
"sub %A0,%2\;sbc %B0,__zero_reg__\;sbc %C0,__zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "set_czn")])
(define_insn "*subpsi3_zero_extend.hi"
[(set (match_operand:PSI 0 "register_operand" "=r")
(minus:PSI (match_operand:PSI 1 "register_operand" "0")
(zero_extend:PSI (match_operand:HI 2 "register_operand" "r"))))]
""
"sub %A0,%2\;sbc %B0,%B2\;sbc %C0,__zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "set_czn")])
(define_insn "*subpsi3_sign_extend.hi"
[(set (match_operand:PSI 0 "register_operand" "=r")
(minus:PSI (match_operand:PSI 1 "register_operand" "0")
(sign_extend:PSI (match_operand:HI 2 "register_operand" "r"))))]
""
"sub %A0,%A2\;sbc %B0,%B2\;sbc %C0,__zero_reg__\;sbrc %B2,7\;inc %C0"
[(set_attr "length" "5")
(set_attr "cc" "set_czn")])
;-----------------------------------------------------------------------------
; sub bytes
;; "subqi3"
;; "subqq3" "subuqq3"
(define_insn "sub3"
[(set (match_operand:ALL1 0 "register_operand" "=??r,d ,r ,r ,r ,r")
(minus:ALL1 (match_operand:ALL1 1 "register_operand" "0,0 ,0 ,0 ,0 ,0")
(match_operand:ALL1 2 "nonmemory_or_const_operand" "r,n Ynn,Y01,Ym1,Y02,Ym2")))]
""
"@
sub %0,%2
subi %0,lo8(%2)
dec %0
inc %0
dec %0\;dec %0
inc %0\;inc %0"
[(set_attr "length" "1,1,1,1,2,2")
(set_attr "cc" "set_czn,set_czn,set_vzn,set_vzn,set_vzn,set_vzn")])
;; "subhi3"
;; "subhq3" "subuhq3"
;; "subha3" "subuha3"
(define_insn "sub3"
[(set (match_operand:ALL2 0 "register_operand" "=??r,d ,*r")
(minus:ALL2 (match_operand:ALL2 1 "register_operand" "0,0 ,0")
(match_operand:ALL2 2 "nonmemory_or_const_operand" "r,i Ynn,Ynn")))
(clobber (match_scratch:QI 3 "=X,X ,&d"))]
""
{
return avr_out_plus (insn, operands);
}
[(set_attr "adjust_len" "plus")
(set_attr "cc" "plus")])
(define_insn "*subhi3_zero_extend1"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (match_operand:HI 1 "register_operand" "0")
(zero_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
""
"sub %A0,%2\;sbc %B0,__zero_reg__"
[(set_attr "length" "2")
(set_attr "cc" "set_czn")])
(define_insn "*subhi3.sign_extend2"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (match_operand:HI 1 "register_operand" "0")
(sign_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
""
{
return reg_overlap_mentioned_p (operands[0], operands[2])
? "mov __tmp_reg__,%2\;sub %A0,%2\;sbc %B0,__zero_reg__\;sbrc __tmp_reg__,7\;inc %B0"
: "sub %A0,%2\;sbc %B0,__zero_reg__\;sbrc %2,7\;inc %B0";
}
[(set_attr "length" "5")
(set_attr "cc" "clobber")])
;; "subsi3"
;; "subsq3" "subusq3"
;; "subsa3" "subusa3"
(define_insn "sub3"
[(set (match_operand:ALL4 0 "register_operand" "=??r,d ,r")
(minus:ALL4 (match_operand:ALL4 1 "register_operand" "0,0 ,0")
(match_operand:ALL4 2 "nonmemory_or_const_operand" "r,n Ynn,Ynn")))
(clobber (match_scratch:QI 3 "=X,X ,&d"))]
""
{
return avr_out_plus (insn, operands);
}
[(set_attr "adjust_len" "plus")
(set_attr "cc" "plus")])
(define_insn "*subsi3_zero_extend"
[(set (match_operand:SI 0 "register_operand" "=r")
(minus:SI (match_operand:SI 1 "register_operand" "0")
(zero_extend:SI (match_operand:QI 2 "register_operand" "r"))))]
""
"sub %A0,%2\;sbc %B0,__zero_reg__\;sbc %C0,__zero_reg__\;sbc %D0,__zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "set_czn")])
(define_insn "*subsi3_zero_extend.hi"
[(set (match_operand:SI 0 "register_operand" "=r")
(minus:SI (match_operand:SI 1 "register_operand" "0")
(zero_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
""
"sub %A0,%2\;sbc %B0,%B2\;sbc %C0,__zero_reg__\;sbc %D0,__zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "set_czn")])
;******************************************************************************
; mul
(define_expand "mulqi3"
[(set (match_operand:QI 0 "register_operand" "")
(mult:QI (match_operand:QI 1 "register_operand" "")
(match_operand:QI 2 "register_operand" "")))]
""
{
if (!AVR_HAVE_MUL)
{
emit_insn (gen_mulqi3_call (operands[0], operands[1], operands[2]));
DONE;
}
})
(define_insn "*mulqi3_enh"
[(set (match_operand:QI 0 "register_operand" "=r")
(mult:QI (match_operand:QI 1 "register_operand" "r")
(match_operand:QI 2 "register_operand" "r")))]
"AVR_HAVE_MUL"
"mul %1,%2
mov %0,r0
clr r1"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_expand "mulqi3_call"
[(set (reg:QI 24) (match_operand:QI 1 "register_operand" ""))
(set (reg:QI 22) (match_operand:QI 2 "register_operand" ""))
(parallel [(set (reg:QI 24) (mult:QI (reg:QI 24) (reg:QI 22)))
(clobber (reg:QI 22))])
(set (match_operand:QI 0 "register_operand" "") (reg:QI 24))]
""
{
avr_fix_inputs (operands, 1 << 2, regmask (QImode, 24));
})
(define_insn "*mulqi3_call"
[(set (reg:QI 24) (mult:QI (reg:QI 24) (reg:QI 22)))
(clobber (reg:QI 22))]
"!AVR_HAVE_MUL"
"%~call __mulqi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; "umulqi3_highpart"
;; "smulqi3_highpart"
(define_insn "mulqi3_highpart"
[(set (match_operand:QI 0 "register_operand" "=r")
(truncate:QI
(lshiftrt:HI (mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" ""))
(any_extend:HI (match_operand:QI 2 "register_operand" "")))
(const_int 8))))]
"AVR_HAVE_MUL"
"mul %1,%2
mov %0,r1
clr __zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
;; Used when expanding div or mod inline for some special values
(define_insn "*subqi3.ashiftrt7"
[(set (match_operand:QI 0 "register_operand" "=r")
(minus:QI (match_operand:QI 1 "register_operand" "0")
(ashiftrt:QI (match_operand:QI 2 "register_operand" "r")
(const_int 7))))]
""
"sbrc %2,7\;inc %0"
[(set_attr "length" "2")
(set_attr "cc" "clobber")])
(define_insn "*addqi3.lt0"
[(set (match_operand:QI 0 "register_operand" "=r")
(plus:QI (lt:QI (match_operand:QI 1 "register_operand" "r")
(const_int 0))
(match_operand:QI 2 "register_operand" "0")))]
""
"sbrc %1,7\;inc %0"
[(set_attr "length" "2")
(set_attr "cc" "clobber")])
(define_insn "*addhi3.lt0"
[(set (match_operand:HI 0 "register_operand" "=w,r")
(plus:HI (lt:HI (match_operand:QI 1 "register_operand" "r,r")
(const_int 0))
(match_operand:HI 2 "register_operand" "0,0")))
(clobber (match_scratch:QI 3 "=X,&1"))]
""
"@
sbrc %1,7\;adiw %0,1
lsl %1\;adc %A0,__zero_reg__\;adc %B0,__zero_reg__"
[(set_attr "length" "2,3")
(set_attr "cc" "clobber")])
(define_insn "*addpsi3.lt0"
[(set (match_operand:PSI 0 "register_operand" "=r")
(plus:PSI (lshiftrt:PSI (match_operand:PSI 1 "register_operand" "r")
(const_int 23))
(match_operand:PSI 2 "register_operand" "0")))]
""
"mov __tmp_reg__,%C1\;lsl __tmp_reg__
adc %A0,__zero_reg__\;adc %B0,__zero_reg__\;adc %C0,__zero_reg__"
[(set_attr "length" "5")
(set_attr "cc" "clobber")])
(define_insn "*addsi3.lt0"
[(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (lshiftrt:SI (match_operand:SI 1 "register_operand" "r")
(const_int 31))
(match_operand:SI 2 "register_operand" "0")))]
""
"mov __tmp_reg__,%D1\;lsl __tmp_reg__
adc %A0,__zero_reg__\;adc %B0,__zero_reg__\;adc %C0,__zero_reg__\;adc %D0,__zero_reg__"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_insn "*umulqihi3.call"
[(set (reg:HI 24)
(mult:HI (zero_extend:HI (reg:QI 22))
(zero_extend:HI (reg:QI 24))))
(clobber (reg:QI 21))
(clobber (reg:HI 22))]
"!AVR_HAVE_MUL"
"%~call __umulqihi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; "umulqihi3"
;; "mulqihi3"
(define_insn "mulqihi3"
[(set (match_operand:HI 0 "register_operand" "=r")
(mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" ""))
(any_extend:HI (match_operand:QI 2 "register_operand" ""))))]
"AVR_HAVE_MUL"
"mul %1,%2
movw %0,r0
clr __zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_insn "usmulqihi3"
[(set (match_operand:HI 0 "register_operand" "=r")
(mult:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "a"))
(sign_extend:HI (match_operand:QI 2 "register_operand" "a"))))]
"AVR_HAVE_MUL"
"mulsu %2,%1
movw %0,r0
clr __zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
;; Above insn is not canonicalized by insn combine, so here is a version with
;; operands swapped.
(define_insn "*sumulqihi3"
[(set (match_operand:HI 0 "register_operand" "=r")
(mult:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "a"))
(zero_extend:HI (match_operand:QI 2 "register_operand" "a"))))]
"AVR_HAVE_MUL"
"mulsu %1,%2
movw %0,r0
clr __zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
;; One-extend operand 1
(define_insn "*osmulqihi3"
[(set (match_operand:HI 0 "register_operand" "=&r")
(mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 "register_operand" "a"))))
(sign_extend:HI (match_operand:QI 2 "register_operand" "a"))))]
"AVR_HAVE_MUL"
"mulsu %2,%1
movw %0,r0
sub %B0,%2
clr __zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*oumulqihi3"
[(set (match_operand:HI 0 "register_operand" "=&r")
(mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 "register_operand" "r"))))
(zero_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
"AVR_HAVE_MUL"
"mul %2,%1
movw %0,r0
sub %B0,%2
clr __zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;******************************************************************************
; multiply-add/sub QI: $0 = $3 +/- $1*$2
;******************************************************************************
(define_insn "*maddqi4"
[(set (match_operand:QI 0 "register_operand" "=r")
(plus:QI (mult:QI (match_operand:QI 1 "register_operand" "r")
(match_operand:QI 2 "register_operand" "r"))
(match_operand:QI 3 "register_operand" "0")))]
"AVR_HAVE_MUL"
"mul %1,%2
add %A0,r0
clr __zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*msubqi4"
[(set (match_operand:QI 0 "register_operand" "=r")
(minus:QI (match_operand:QI 3 "register_operand" "0")
(mult:QI (match_operand:QI 1 "register_operand" "r")
(match_operand:QI 2 "register_operand" "r"))))]
"AVR_HAVE_MUL"
"mul %1,%2
sub %A0,r0
clr __zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn_and_split "*maddqi4.const"
[(set (match_operand:QI 0 "register_operand" "=r")
(plus:QI (mult:QI (match_operand:QI 1 "register_operand" "r")
(match_operand:QI 2 "const_int_operand" "n"))
(match_operand:QI 3 "register_operand" "0")))
(clobber (match_scratch:QI 4 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 4)
(match_dup 2))
; *maddqi4
(set (match_dup 0)
(plus:QI (mult:QI (match_dup 1)
(match_dup 4))
(match_dup 3)))])
(define_insn_and_split "*msubqi4.const"
[(set (match_operand:QI 0 "register_operand" "=r")
(minus:QI (match_operand:QI 3 "register_operand" "0")
(mult:QI (match_operand:QI 1 "register_operand" "r")
(match_operand:QI 2 "const_int_operand" "n"))))
(clobber (match_scratch:QI 4 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 4)
(match_dup 2))
; *msubqi4
(set (match_dup 0)
(minus:QI (match_dup 3)
(mult:QI (match_dup 1)
(match_dup 4))))])
;******************************************************************************
; multiply-add/sub HI: $0 = $3 +/- $1*$2 with 8-bit values $1, $2
;******************************************************************************
;; We don't use standard insns/expanders as they lead to cumbersome code for,
;; e.g,
;;
;; int foo (unsigned char z)
;; {
;; extern int aInt[];
;; return aInt[3*z+2];
;; }
;;
;; because the constant +4 then is added explicitely instead of consuming it
;; with the aInt symbol. Therefore, we rely on insn combine which takes costs
;; into account more accurately and doesn't do burte-force multiply-add/sub.
;; The implementational effort is the same so we are fine with that approach.
;; "*maddqihi4"
;; "*umaddqihi4"
(define_insn "*maddqihi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(plus:HI (mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" ""))
(any_extend:HI (match_operand:QI 2 "register_operand" "")))
(match_operand:HI 3 "register_operand" "0")))]
"AVR_HAVE_MUL"
"mul %1,%2
add %A0,r0
adc %B0,r1
clr __zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; "*msubqihi4"
;; "*umsubqihi4"
(define_insn "*msubqihi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (match_operand:HI 3 "register_operand" "0")
(mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" ""))
(any_extend:HI (match_operand:QI 2 "register_operand" "")))))]
"AVR_HAVE_MUL"
"mul %1,%2
sub %A0,r0
sbc %B0,r1
clr __zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; "*usmaddqihi4"
;; "*sumaddqihi4"
(define_insn "*msubqihi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(plus:HI (mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" "a"))
(any_extend2:HI (match_operand:QI 2 "register_operand" "a")))
(match_operand:HI 3 "register_operand" "0")))]
"AVR_HAVE_MUL
&& reload_completed
&& != "
{
output_asm_insn ( == SIGN_EXTEND
? "mulsu %1,%2" : "mulsu %2,%1", operands);
return "add %A0,r0\;adc %B0,r1\;clr __zero_reg__";
}
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; "*usmsubqihi4"
;; "*sumsubqihi4"
(define_insn "*msubqihi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (match_operand:HI 3 "register_operand" "0")
(mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" "a"))
(any_extend2:HI (match_operand:QI 2 "register_operand" "a")))))]
"AVR_HAVE_MUL
&& reload_completed
&& != "
{
output_asm_insn ( == SIGN_EXTEND
? "mulsu %1,%2" : "mulsu %2,%1", operands);
return "sub %A0,r0\;sbc %B0,r1\;clr __zero_reg__";
}
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; Handle small constants
;; Special case of a += 2*b as frequently seen with accesses to int arrays.
;; This is shorter, faster than MUL and has lower register pressure.
(define_insn_and_split "*umaddqihi4.2"
[(set (match_operand:HI 0 "register_operand" "=r")
(plus:HI (mult:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "r"))
(const_int 2))
(match_operand:HI 2 "register_operand" "r")))]
"!reload_completed
&& !reg_overlap_mentioned_p (operands[0], operands[1])"
{ gcc_unreachable(); }
"&& 1"
[(set (match_dup 0)
(match_dup 2))
; *addhi3_zero_extend
(set (match_dup 0)
(plus:HI (zero_extend:HI (match_dup 1))
(match_dup 0)))
; *addhi3_zero_extend
(set (match_dup 0)
(plus:HI (zero_extend:HI (match_dup 1))
(match_dup 0)))])
;; "umaddqihi4.uconst"
;; "maddqihi4.sconst"
(define_insn_and_split "*maddqihi4.const"
[(set (match_operand:HI 0 "register_operand" "=r")
(plus:HI (mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" ""))
(match_operand:HI 2 "8_operand" "n"))
(match_operand:HI 3 "register_operand" "0")))
(clobber (match_scratch:QI 4 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 4)
(match_dup 2))
; *umaddqihi4 resp. *maddqihi4
(set (match_dup 0)
(plus:HI (mult:HI (any_extend:HI (match_dup 1))
(any_extend:HI (match_dup 4)))
(match_dup 3)))]
{
operands[2] = gen_int_mode (INTVAL (operands[2]), QImode);
})
;; "*umsubqihi4.uconst"
;; "*msubqihi4.sconst"
(define_insn_and_split "*msubqihi4.const"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (match_operand:HI 3 "register_operand" "0")
(mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" ""))
(match_operand:HI 2 "8_operand" "n"))))
(clobber (match_scratch:QI 4 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 4)
(match_dup 2))
; *umsubqihi4 resp. *msubqihi4
(set (match_dup 0)
(minus:HI (match_dup 3)
(mult:HI (any_extend:HI (match_dup 1))
(any_extend:HI (match_dup 4)))))]
{
operands[2] = gen_int_mode (INTVAL (operands[2]), QImode);
})
;; Same as the insn above, but combiner tries versions canonicalized to ASHIFT
;; for MULT with power of 2 and skips trying MULT insn above.
(define_insn_and_split "*umsubqihi4.uconst.ashift"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (match_operand:HI 3 "register_operand" "0")
(ashift:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "r"))
(match_operand:HI 2 "const_2_to_7_operand" "n"))))
(clobber (match_scratch:QI 4 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 4)
(match_dup 2))
; *umsubqihi4
(set (match_dup 0)
(minus:HI (match_dup 3)
(mult:HI (zero_extend:HI (match_dup 1))
(zero_extend:HI (match_dup 4)))))]
{
operands[2] = gen_int_mode (1 << INTVAL (operands[2]), QImode);
})
;; Same as the insn above, but combiner tries versions canonicalized to ASHIFT
;; for MULT with power of 2 and skips trying MULT insn above. We omit 128
;; because this would require an extra pattern for just one value.
(define_insn_and_split "*msubqihi4.sconst.ashift"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (match_operand:HI 3 "register_operand" "0")
(ashift:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "d"))
(match_operand:HI 2 "const_1_to_6_operand" "M"))))
(clobber (match_scratch:QI 4 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 4)
(match_dup 2))
; *smsubqihi4
(set (match_dup 0)
(minus:HI (match_dup 3)
(mult:HI (sign_extend:HI (match_dup 1))
(sign_extend:HI (match_dup 4)))))]
{
operands[2] = gen_int_mode (1 << INTVAL (operands[2]), QImode);
})
;; For signed/unsigned combinations that require narrow constraint "a"
;; just provide a pattern if signed/unsigned combination is actually needed.
(define_insn_and_split "*sumaddqihi4.uconst"
[(set (match_operand:HI 0 "register_operand" "=r")
(plus:HI (mult:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "a"))
(match_operand:HI 2 "u8_operand" "M"))
(match_operand:HI 3 "register_operand" "0")))
(clobber (match_scratch:QI 4 "=&a"))]
"AVR_HAVE_MUL
&& !s8_operand (operands[2], VOIDmode)"
"#"
"&& reload_completed"
[(set (match_dup 4)
(match_dup 2))
; *sumaddqihi4
(set (match_dup 0)
(plus:HI (mult:HI (sign_extend:HI (match_dup 1))
(zero_extend:HI (match_dup 4)))
(match_dup 3)))]
{
operands[2] = gen_int_mode (INTVAL (operands[2]), QImode);
})
(define_insn_and_split "*sumsubqihi4.uconst"
[(set (match_operand:HI 0 "register_operand" "=r")
(minus:HI (match_operand:HI 3 "register_operand" "0")
(mult:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "a"))
(match_operand:HI 2 "u8_operand" "M"))))
(clobber (match_scratch:QI 4 "=&a"))]
"AVR_HAVE_MUL
&& !s8_operand (operands[2], VOIDmode)"
"#"
"&& reload_completed"
[(set (match_dup 4)
(match_dup 2))
; *sumsubqihi4
(set (match_dup 0)
(minus:HI (match_dup 3)
(mult:HI (sign_extend:HI (match_dup 1))
(zero_extend:HI (match_dup 4)))))]
{
operands[2] = gen_int_mode (INTVAL (operands[2]), QImode);
})
;******************************************************************************
; mul HI: $1 = sign/zero-extend, $2 = small constant
;******************************************************************************
;; "*muluqihi3.uconst"
;; "*mulsqihi3.sconst"
(define_insn_and_split "*mulqihi3.const"
[(set (match_operand:HI 0 "register_operand" "=r")
(mult:HI (any_extend:HI (match_operand:QI 1 "register_operand" ""))
(match_operand:HI 2 "8_operand" "n")))
(clobber (match_scratch:QI 3 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 3)
(match_dup 2))
; umulqihi3 resp. mulqihi3
(set (match_dup 0)
(mult:HI (any_extend:HI (match_dup 1))
(any_extend:HI (match_dup 3))))]
{
operands[2] = gen_int_mode (INTVAL (operands[2]), QImode);
})
(define_insn_and_split "*muluqihi3.sconst"
[(set (match_operand:HI 0 "register_operand" "=r")
(mult:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "a"))
(match_operand:HI 2 "s8_operand" "n")))
(clobber (match_scratch:QI 3 "=&a"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 3)
(match_dup 2))
; usmulqihi3
(set (match_dup 0)
(mult:HI (zero_extend:HI (match_dup 1))
(sign_extend:HI (match_dup 3))))]
{
operands[2] = gen_int_mode (INTVAL (operands[2]), QImode);
})
(define_insn_and_split "*mulsqihi3.uconst"
[(set (match_operand:HI 0 "register_operand" "=r")
(mult:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "a"))
(match_operand:HI 2 "u8_operand" "M")))
(clobber (match_scratch:QI 3 "=&a"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 3)
(match_dup 2))
; usmulqihi3
(set (match_dup 0)
(mult:HI (zero_extend:HI (match_dup 3))
(sign_extend:HI (match_dup 1))))]
{
operands[2] = gen_int_mode (INTVAL (operands[2]), QImode);
})
(define_insn_and_split "*mulsqihi3.oconst"
[(set (match_operand:HI 0 "register_operand" "=&r")
(mult:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "a"))
(match_operand:HI 2 "o8_operand" "n")))
(clobber (match_scratch:QI 3 "=&a"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 3)
(match_dup 2))
; *osmulqihi3
(set (match_dup 0)
(mult:HI (not:HI (zero_extend:HI (not:QI (match_dup 3))))
(sign_extend:HI (match_dup 1))))]
{
operands[2] = gen_int_mode (INTVAL (operands[2]), QImode);
})
;; The EXTEND of $1 only appears in combine, we don't see it in expand so that
;; expand decides to use ASHIFT instead of MUL because ASHIFT costs are cheaper
;; at that time. Fix that.
(define_insn "*ashiftqihi2.signx.1"
[(set (match_operand:HI 0 "register_operand" "=r,*r")
(ashift:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "0,r"))
(const_int 1)))]
""
"@
lsl %A0\;sbc %B0,%B0
mov %A0,%1\;lsl %A0\;sbc %B0,%B0"
[(set_attr "length" "2,3")
(set_attr "cc" "clobber")])
(define_insn_and_split "*ashifthi3.signx.const"
[(set (match_operand:HI 0 "register_operand" "=r")
(ashift:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "d"))
(match_operand:HI 2 "const_2_to_6_operand" "I")))
(clobber (match_scratch:QI 3 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 3)
(match_dup 2))
; mulqihi3
(set (match_dup 0)
(mult:HI (sign_extend:HI (match_dup 1))
(sign_extend:HI (match_dup 3))))]
{
operands[2] = GEN_INT (1 << INTVAL (operands[2]));
})
(define_insn_and_split "*ashifthi3.signx.const7"
[(set (match_operand:HI 0 "register_operand" "=r")
(ashift:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "a"))
(const_int 7)))
(clobber (match_scratch:QI 2 "=&a"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 2)
(match_dup 3))
; usmulqihi3
(set (match_dup 0)
(mult:HI (zero_extend:HI (match_dup 2))
(sign_extend:HI (match_dup 1))))]
{
operands[3] = gen_int_mode (1 << 7, QImode);
})
(define_insn_and_split "*ashifthi3.zerox.const"
[(set (match_operand:HI 0 "register_operand" "=r")
(ashift:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "r"))
(match_operand:HI 2 "const_2_to_7_operand" "I")))
(clobber (match_scratch:QI 3 "=&d"))]
"AVR_HAVE_MUL"
"#"
"&& reload_completed"
[(set (match_dup 3)
(match_dup 2))
; umulqihi3
(set (match_dup 0)
(mult:HI (zero_extend:HI (match_dup 1))
(zero_extend:HI (match_dup 3))))]
{
operands[2] = gen_int_mode (1 << INTVAL (operands[2]), QImode);
})
;******************************************************************************
; mul HI: $1 = sign-/zero-/one-extend, $2 = reg
;******************************************************************************
(define_insn "mulsqihi3"
[(set (match_operand:HI 0 "register_operand" "=&r")
(mult:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "a"))
(match_operand:HI 2 "register_operand" "a")))]
"AVR_HAVE_MUL"
"mulsu %1,%A2
movw %0,r0
mul %1,%B2
add %B0,r0
clr __zero_reg__"
[(set_attr "length" "5")
(set_attr "cc" "clobber")])
(define_insn "muluqihi3"
[(set (match_operand:HI 0 "register_operand" "=&r")
(mult:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "r"))
(match_operand:HI 2 "register_operand" "r")))]
"AVR_HAVE_MUL"
"mul %1,%A2
movw %0,r0
mul %1,%B2
add %B0,r0
clr __zero_reg__"
[(set_attr "length" "5")
(set_attr "cc" "clobber")])
;; one-extend operand 1
(define_insn "muloqihi3"
[(set (match_operand:HI 0 "register_operand" "=&r")
(mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 "register_operand" "r"))))
(match_operand:HI 2 "register_operand" "r")))]
"AVR_HAVE_MUL"
"mul %1,%A2
movw %0,r0
mul %1,%B2
add %B0,r0
sub %B0,%A2
clr __zero_reg__"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
;******************************************************************************
(define_expand "mulhi3"
[(set (match_operand:HI 0 "register_operand" "")
(mult:HI (match_operand:HI 1 "register_operand" "")
(match_operand:HI 2 "register_or_s9_operand" "")))]
""
{
if (!AVR_HAVE_MUL)
{
if (!register_operand (operands[2], HImode))
operands[2] = force_reg (HImode, operands[2]);
emit_insn (gen_mulhi3_call (operands[0], operands[1], operands[2]));
DONE;
}
/* ; For small constants we can do better by extending them on the fly.
; The constant can be loaded in one instruction and the widening
; multiplication is shorter. First try the unsigned variant because it
; allows constraint "d" instead of "a" for the signed version. */
if (s9_operand (operands[2], HImode))
{
rtx reg = force_reg (QImode, gen_int_mode (INTVAL (operands[2]), QImode));
if (u8_operand (operands[2], HImode))
{
emit_insn (gen_muluqihi3 (operands[0], reg, operands[1]));
}
else if (s8_operand (operands[2], HImode))
{
emit_insn (gen_mulsqihi3 (operands[0], reg, operands[1]));
}
else
{
emit_insn (gen_muloqihi3 (operands[0], reg, operands[1]));
}
DONE;
}
if (!register_operand (operands[2], HImode))
operands[2] = force_reg (HImode, operands[2]);
})
(define_insn "*mulhi3_enh"
[(set (match_operand:HI 0 "register_operand" "=&r")
(mult:HI (match_operand:HI 1 "register_operand" "r")
(match_operand:HI 2 "register_operand" "r")))]
"AVR_HAVE_MUL"
{
return REGNO (operands[1]) == REGNO (operands[2])
? "mul %A1,%A1\;movw %0,r0\;mul %A1,%B1\;add %B0,r0\;add %B0,r0\;clr r1"
: "mul %A1,%A2\;movw %0,r0\;mul %A1,%B2\;add %B0,r0\;mul %B1,%A2\;add %B0,r0\;clr r1";
}
[(set_attr "length" "7")
(set_attr "cc" "clobber")])
(define_expand "mulhi3_call"
[(set (reg:HI 24) (match_operand:HI 1 "register_operand" ""))
(set (reg:HI 22) (match_operand:HI 2 "register_operand" ""))
(parallel [(set (reg:HI 24) (mult:HI (reg:HI 24) (reg:HI 22)))
(clobber (reg:HI 22))
(clobber (reg:QI 21))])
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 24))]
""
{
avr_fix_inputs (operands, (1 << 2), regmask (HImode, 24));
})
(define_insn "*mulhi3_call"
[(set (reg:HI 24) (mult:HI (reg:HI 24) (reg:HI 22)))
(clobber (reg:HI 22))
(clobber (reg:QI 21))]
"!AVR_HAVE_MUL"
"%~call __mulhi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; To support widening multiplication with constant we postpone
;; expanding to the implicit library call until post combine and
;; prior to register allocation. Clobber all hard registers that
;; might be used by the (widening) multiply until it is split and
;; it's final register footprint is worked out.
(define_expand "mulsi3"
[(parallel [(set (match_operand:SI 0 "register_operand" "")
(mult:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "nonmemory_operand" "")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))])]
"AVR_HAVE_MUL"
{
if (u16_operand (operands[2], SImode))
{
operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
emit_insn (gen_muluhisi3 (operands[0], operands[2], operands[1]));
DONE;
}
if (o16_operand (operands[2], SImode))
{
operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
emit_insn (gen_mulohisi3 (operands[0], operands[2], operands[1]));
DONE;
}
if (avr_emit3_fix_outputs (gen_mulsi3, operands, 1 << 0,
regmask (DImode, 18) | regmask (HImode, 26)))
DONE;
})
(define_insn_and_split "*mulsi3"
[(set (match_operand:SI 0 "pseudo_register_operand" "=r")
(mult:SI (match_operand:SI 1 "pseudo_register_operand" "r")
(match_operand:SI 2 "pseudo_register_or_const_int_operand" "rn")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))]
"AVR_HAVE_MUL && !reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:SI 18)
(match_dup 1))
(set (reg:SI 22)
(match_dup 2))
(parallel [(set (reg:SI 22)
(mult:SI (reg:SI 22)
(reg:SI 18)))
(clobber (reg:HI 26))])
(set (match_dup 0)
(reg:SI 22))]
{
if (u16_operand (operands[2], SImode))
{
operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
emit_insn (gen_muluhisi3 (operands[0], operands[2], operands[1]));
DONE;
}
if (o16_operand (operands[2], SImode))
{
operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
emit_insn (gen_mulohisi3 (operands[0], operands[2], operands[1]));
DONE;
}
})
;; "muluqisi3"
;; "muluhisi3"
(define_expand "mulusi3"
[(parallel [(set (match_operand:SI 0 "pseudo_register_operand" "")
(mult:SI (zero_extend:SI (match_operand:QIHI 1 "pseudo_register_operand" ""))
(match_operand:SI 2 "pseudo_register_or_const_int_operand" "")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))])]
"AVR_HAVE_MUL"
{
avr_fix_inputs (operands, (1 << 1) | (1 << 2), -1u);
if (avr_emit3_fix_outputs (gen_mulusi3, operands, 1 << 0,
regmask (DImode, 18) | regmask (HImode, 26)))
DONE;
})
;; "*muluqisi3"
;; "*muluhisi3"
(define_insn_and_split "*mulusi3"
[(set (match_operand:SI 0 "pseudo_register_operand" "=r")
(mult:SI (zero_extend:SI (match_operand:QIHI 1 "pseudo_register_operand" "r"))
(match_operand:SI 2 "pseudo_register_or_const_int_operand" "rn")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))]
"AVR_HAVE_MUL && !reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:HI 26)
(match_dup 1))
(set (reg:SI 18)
(match_dup 2))
(set (reg:SI 22)
(mult:SI (zero_extend:SI (reg:HI 26))
(reg:SI 18)))
(set (match_dup 0)
(reg:SI 22))]
{
/* Do the QI -> HI extension explicitely before the multiplication. */
/* Do the HI -> SI extension implicitely and after the multiplication. */
if (QImode == mode)
operands[1] = gen_rtx_ZERO_EXTEND (HImode, operands[1]);
if (u16_operand (operands[2], SImode))
{
operands[1] = force_reg (HImode, operands[1]);
operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
emit_insn (gen_umulhisi3 (operands[0], operands[1], operands[2]));
DONE;
}
})
;; "mulsqisi3"
;; "mulshisi3"
(define_expand "mulssi3"
[(parallel [(set (match_operand:SI 0 "pseudo_register_operand" "")
(mult:SI (sign_extend:SI (match_operand:QIHI 1 "pseudo_register_operand" ""))
(match_operand:SI 2 "pseudo_register_or_const_int_operand" "")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))])]
"AVR_HAVE_MUL"
{
avr_fix_inputs (operands, (1 << 1) | (1 << 2), -1u);
if (avr_emit3_fix_outputs (gen_mulssi3, operands, 1 << 0,
regmask (DImode, 18) | regmask (HImode, 26)))
DONE;
})
;; "*mulsqisi3"
;; "*mulshisi3"
(define_insn_and_split "*mulssi3"
[(set (match_operand:SI 0 "pseudo_register_operand" "=r")
(mult:SI (sign_extend:SI (match_operand:QIHI 1 "pseudo_register_operand" "r"))
(match_operand:SI 2 "pseudo_register_or_const_int_operand" "rn")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))]
"AVR_HAVE_MUL && !reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:HI 26)
(match_dup 1))
(set (reg:SI 18)
(match_dup 2))
(set (reg:SI 22)
(mult:SI (sign_extend:SI (reg:HI 26))
(reg:SI 18)))
(set (match_dup 0)
(reg:SI 22))]
{
/* Do the QI -> HI extension explicitely before the multiplication. */
/* Do the HI -> SI extension implicitely and after the multiplication. */
if (QImode == mode)
operands[1] = gen_rtx_SIGN_EXTEND (HImode, operands[1]);
if (u16_operand (operands[2], SImode)
|| s16_operand (operands[2], SImode))
{
rtx xop2 = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
operands[1] = force_reg (HImode, operands[1]);
if (u16_operand (operands[2], SImode))
emit_insn (gen_usmulhisi3 (operands[0], xop2, operands[1]));
else
emit_insn (gen_mulhisi3 (operands[0], operands[1], xop2));
DONE;
}
})
;; One-extend operand 1
(define_expand "mulohisi3"
[(parallel [(set (match_operand:SI 0 "pseudo_register_operand" "")
(mult:SI (not:SI (zero_extend:SI
(not:HI (match_operand:HI 1 "pseudo_register_operand" ""))))
(match_operand:SI 2 "pseudo_register_or_const_int_operand" "")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))])]
"AVR_HAVE_MUL"
{
avr_fix_inputs (operands, (1 << 1) | (1 << 2), -1u);
if (avr_emit3_fix_outputs (gen_mulohisi3, operands, 1 << 0,
regmask (DImode, 18) | regmask (HImode, 26)))
DONE;
})
(define_insn_and_split "*mulohisi3"
[(set (match_operand:SI 0 "pseudo_register_operand" "=r")
(mult:SI (not:SI (zero_extend:SI
(not:HI (match_operand:HI 1 "pseudo_register_operand" "r"))))
(match_operand:SI 2 "pseudo_register_or_const_int_operand" "rn")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))]
"AVR_HAVE_MUL && !reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:HI 26)
(match_dup 1))
(set (reg:SI 18)
(match_dup 2))
(set (reg:SI 22)
(mult:SI (not:SI (zero_extend:SI (not:HI (reg:HI 26))))
(reg:SI 18)))
(set (match_dup 0)
(reg:SI 22))])
;; "mulhisi3"
;; "umulhisi3"
(define_expand "mulhisi3"
[(parallel [(set (match_operand:SI 0 "register_operand" "")
(mult:SI (any_extend:SI (match_operand:HI 1 "register_operand" ""))
(any_extend:SI (match_operand:HI 2 "register_operand" ""))))
(clobber (reg:HI 26))
(clobber (reg:DI 18))])]
"AVR_HAVE_MUL"
{
if (avr_emit3_fix_outputs (gen_mulhisi3, operands, 1 << 0,
regmask (DImode, 18) | regmask (HImode, 26)))
DONE;
})
(define_expand "usmulhisi3"
[(parallel [(set (match_operand:SI 0 "register_operand" "")
(mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" ""))
(sign_extend:SI (match_operand:HI 2 "register_operand" ""))))
(clobber (reg:HI 26))
(clobber (reg:DI 18))])]
"AVR_HAVE_MUL"
{
if (avr_emit3_fix_outputs (gen_usmulhisi3, operands, 1 << 0,
regmask (DImode, 18) | regmask (HImode, 26)))
DONE;
})
;; "*uumulqihisi3" "*uumulhiqisi3" "*uumulhihisi3" "*uumulqiqisi3"
;; "*usmulqihisi3" "*usmulhiqisi3" "*usmulhihisi3" "*usmulqiqisi3"
;; "*sumulqihisi3" "*sumulhiqisi3" "*sumulhihisi3" "*sumulqiqisi3"
;; "*ssmulqihisi3" "*ssmulhiqisi3" "*ssmulhihisi3" "*ssmulqiqisi3"
(define_insn_and_split
"*mulsi3"
[(set (match_operand:SI 0 "pseudo_register_operand" "=r")
(mult:SI (any_extend:SI (match_operand:QIHI 1 "pseudo_register_operand" "r"))
(any_extend2:SI (match_operand:QIHI2 2 "pseudo_register_operand" "r"))))
(clobber (reg:HI 26))
(clobber (reg:DI 18))]
"AVR_HAVE_MUL && !reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:HI 18)
(match_dup 1))
(set (reg:HI 26)
(match_dup 2))
(set (reg:SI 22)
(mult:SI (match_dup 3)
(match_dup 4)))
(set (match_dup 0)
(reg:SI 22))]
{
rtx xop1 = operands[1];
rtx xop2 = operands[2];
/* Do the QI -> HI extension explicitely before the multiplication. */
/* Do the HI -> SI extension implicitely and after the multiplication. */
if (QImode == mode)
xop1 = gen_rtx_fmt_e (, HImode, xop1);
if (QImode == mode)
xop2 = gen_rtx_fmt_e (, HImode, xop2);
if ( ==
|| == ZERO_EXTEND)
{
operands[1] = xop1;
operands[2] = xop2;
operands[3] = gen_rtx_fmt_e (, SImode, gen_rtx_REG (HImode, 18));
operands[4] = gen_rtx_fmt_e (, SImode, gen_rtx_REG (HImode, 26));
}
else
{
/* = SIGN_EXTEND */
/* = ZERO_EXTEND */
operands[1] = xop2;
operands[2] = xop1;
operands[3] = gen_rtx_ZERO_EXTEND (SImode, gen_rtx_REG (HImode, 18));
operands[4] = gen_rtx_SIGN_EXTEND (SImode, gen_rtx_REG (HImode, 26));
}
})
;; "smulhi3_highpart"
;; "umulhi3_highpart"
(define_expand "mulhi3_highpart"
[(set (reg:HI 18)
(match_operand:HI 1 "nonmemory_operand" ""))
(set (reg:HI 26)
(match_operand:HI 2 "nonmemory_operand" ""))
(parallel [(set (reg:HI 24)
(truncate:HI (lshiftrt:SI (mult:SI (any_extend:SI (reg:HI 18))
(any_extend:SI (reg:HI 26)))
(const_int 16))))
(clobber (reg:HI 22))])
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 24))]
"AVR_HAVE_MUL"
{
avr_fix_inputs (operands, 1 << 2, regmask (HImode, 18));
})
(define_insn "*mulsi3_call"
[(set (reg:SI 22)
(mult:SI (reg:SI 22)
(reg:SI 18)))
(clobber (reg:HI 26))]
"AVR_HAVE_MUL"
"%~call __mulsi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; "*mulhisi3_call"
;; "*umulhisi3_call"
(define_insn "*mulhisi3_call"
[(set (reg:SI 22)
(mult:SI (any_extend:SI (reg:HI 18))
(any_extend:SI (reg:HI 26))))]
"AVR_HAVE_MUL"
"%~call __mulhisi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; "*umulhi3_highpart_call"
;; "*smulhi3_highpart_call"
(define_insn "*mulhi3_highpart_call"
[(set (reg:HI 24)
(truncate:HI (lshiftrt:SI (mult:SI (any_extend:SI (reg:HI 18))
(any_extend:SI (reg:HI 26)))
(const_int 16))))
(clobber (reg:HI 22))]
"AVR_HAVE_MUL"
"%~call __mulhisi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*usmulhisi3_call"
[(set (reg:SI 22)
(mult:SI (zero_extend:SI (reg:HI 18))
(sign_extend:SI (reg:HI 26))))]
"AVR_HAVE_MUL"
"%~call __usmulhisi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*mulhisi3_call"
[(set (reg:SI 22)
(mult:SI (any_extend:SI (reg:HI 26))
(reg:SI 18)))]
"AVR_HAVE_MUL"
"%~call __mulhisi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*mulohisi3_call"
[(set (reg:SI 22)
(mult:SI (not:SI (zero_extend:SI (not:HI (reg:HI 26))))
(reg:SI 18)))]
"AVR_HAVE_MUL"
"%~call __mulohisi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
; / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % / %
; divmod
;; Generate lib1funcs.S calls ourselves, because:
;; - we know exactly which registers are clobbered (for QI and HI
;; modes, some of the call-used registers are preserved)
;; - we get both the quotient and the remainder at no extra cost
;; - we split the patterns only after the first CSE passes because
;; CSE has problems to operate on hard regs.
;;
(define_insn_and_split "divmodqi4"
[(parallel [(set (match_operand:QI 0 "pseudo_register_operand" "")
(div:QI (match_operand:QI 1 "pseudo_register_operand" "")
(match_operand:QI 2 "pseudo_register_operand" "")))
(set (match_operand:QI 3 "pseudo_register_operand" "")
(mod:QI (match_dup 1) (match_dup 2)))
(clobber (reg:QI 22))
(clobber (reg:QI 23))
(clobber (reg:QI 24))
(clobber (reg:QI 25))])]
""
"this divmodqi4 pattern should have been splitted;"
""
[(set (reg:QI 24) (match_dup 1))
(set (reg:QI 22) (match_dup 2))
(parallel [(set (reg:QI 24) (div:QI (reg:QI 24) (reg:QI 22)))
(set (reg:QI 25) (mod:QI (reg:QI 24) (reg:QI 22)))
(clobber (reg:QI 22))
(clobber (reg:QI 23))])
(set (match_dup 0) (reg:QI 24))
(set (match_dup 3) (reg:QI 25))])
(define_insn "*divmodqi4_call"
[(set (reg:QI 24) (div:QI (reg:QI 24) (reg:QI 22)))
(set (reg:QI 25) (mod:QI (reg:QI 24) (reg:QI 22)))
(clobber (reg:QI 22))
(clobber (reg:QI 23))]
""
"%~call __divmodqi4"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn_and_split "udivmodqi4"
[(parallel [(set (match_operand:QI 0 "pseudo_register_operand" "")
(udiv:QI (match_operand:QI 1 "pseudo_register_operand" "")
(match_operand:QI 2 "pseudo_register_operand" "")))
(set (match_operand:QI 3 "pseudo_register_operand" "")
(umod:QI (match_dup 1) (match_dup 2)))
(clobber (reg:QI 22))
(clobber (reg:QI 23))
(clobber (reg:QI 24))
(clobber (reg:QI 25))])]
""
"this udivmodqi4 pattern should have been splitted;"
""
[(set (reg:QI 24) (match_dup 1))
(set (reg:QI 22) (match_dup 2))
(parallel [(set (reg:QI 24) (udiv:QI (reg:QI 24) (reg:QI 22)))
(set (reg:QI 25) (umod:QI (reg:QI 24) (reg:QI 22)))
(clobber (reg:QI 23))])
(set (match_dup 0) (reg:QI 24))
(set (match_dup 3) (reg:QI 25))])
(define_insn "*udivmodqi4_call"
[(set (reg:QI 24) (udiv:QI (reg:QI 24) (reg:QI 22)))
(set (reg:QI 25) (umod:QI (reg:QI 24) (reg:QI 22)))
(clobber (reg:QI 23))]
""
"%~call __udivmodqi4"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn_and_split "divmodhi4"
[(parallel [(set (match_operand:HI 0 "pseudo_register_operand" "")
(div:HI (match_operand:HI 1 "pseudo_register_operand" "")
(match_operand:HI 2 "pseudo_register_operand" "")))
(set (match_operand:HI 3 "pseudo_register_operand" "")
(mod:HI (match_dup 1) (match_dup 2)))
(clobber (reg:QI 21))
(clobber (reg:HI 22))
(clobber (reg:HI 24))
(clobber (reg:HI 26))])]
""
"this should have been splitted;"
""
[(set (reg:HI 24) (match_dup 1))
(set (reg:HI 22) (match_dup 2))
(parallel [(set (reg:HI 22) (div:HI (reg:HI 24) (reg:HI 22)))
(set (reg:HI 24) (mod:HI (reg:HI 24) (reg:HI 22)))
(clobber (reg:HI 26))
(clobber (reg:QI 21))])
(set (match_dup 0) (reg:HI 22))
(set (match_dup 3) (reg:HI 24))])
(define_insn "*divmodhi4_call"
[(set (reg:HI 22) (div:HI (reg:HI 24) (reg:HI 22)))
(set (reg:HI 24) (mod:HI (reg:HI 24) (reg:HI 22)))
(clobber (reg:HI 26))
(clobber (reg:QI 21))]
""
"%~call __divmodhi4"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn_and_split "udivmodhi4"
[(parallel [(set (match_operand:HI 0 "pseudo_register_operand" "")
(udiv:HI (match_operand:HI 1 "pseudo_register_operand" "")
(match_operand:HI 2 "pseudo_register_operand" "")))
(set (match_operand:HI 3 "pseudo_register_operand" "")
(umod:HI (match_dup 1) (match_dup 2)))
(clobber (reg:QI 21))
(clobber (reg:HI 22))
(clobber (reg:HI 24))
(clobber (reg:HI 26))])]
""
"this udivmodhi4 pattern should have been splitted.;"
""
[(set (reg:HI 24) (match_dup 1))
(set (reg:HI 22) (match_dup 2))
(parallel [(set (reg:HI 22) (udiv:HI (reg:HI 24) (reg:HI 22)))
(set (reg:HI 24) (umod:HI (reg:HI 24) (reg:HI 22)))
(clobber (reg:HI 26))
(clobber (reg:QI 21))])
(set (match_dup 0) (reg:HI 22))
(set (match_dup 3) (reg:HI 24))])
(define_insn "*udivmodhi4_call"
[(set (reg:HI 22) (udiv:HI (reg:HI 24) (reg:HI 22)))
(set (reg:HI 24) (umod:HI (reg:HI 24) (reg:HI 22)))
(clobber (reg:HI 26))
(clobber (reg:QI 21))]
""
"%~call __udivmodhi4"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; 24-bit multiply
;; To support widening multiplication with constant we postpone
;; expanding to the implicit library call until post combine and
;; prior to register allocation. Clobber all hard registers that
;; might be used by the (widening) multiply until it is split and
;; it's final register footprint is worked out.
(define_expand "mulpsi3"
[(parallel [(set (match_operand:PSI 0 "register_operand" "")
(mult:PSI (match_operand:PSI 1 "register_operand" "")
(match_operand:PSI 2 "nonmemory_operand" "")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))])]
"AVR_HAVE_MUL"
{
if (s8_operand (operands[2], PSImode))
{
rtx reg = force_reg (QImode, gen_int_mode (INTVAL (operands[2]), QImode));
emit_insn (gen_mulsqipsi3 (operands[0], reg, operands[1]));
DONE;
}
if (avr_emit3_fix_outputs (gen_mulpsi3, operands, 1u << 0,
regmask (DImode, 18) | regmask (HImode, 26)))
DONE;
})
(define_insn "*umulqihipsi3"
[(set (match_operand:PSI 0 "register_operand" "=&r")
(mult:PSI (zero_extend:PSI (match_operand:QI 1 "register_operand" "r"))
(zero_extend:PSI (match_operand:HI 2 "register_operand" "r"))))]
"AVR_HAVE_MUL"
"mul %1,%A2
movw %A0,r0
mul %1,%B2
clr %C0
add %B0,r0
adc %C0,r1
clr __zero_reg__"
[(set_attr "length" "7")
(set_attr "cc" "clobber")])
(define_insn "*umulhiqipsi3"
[(set (match_operand:PSI 0 "register_operand" "=&r")
(mult:PSI (zero_extend:PSI (match_operand:HI 2 "register_operand" "r"))
(zero_extend:PSI (match_operand:QI 1 "register_operand" "r"))))]
"AVR_HAVE_MUL"
"mul %1,%A2
movw %A0,r0
mul %1,%B2
add %B0,r0
mov %C0,r1
clr __zero_reg__
adc %C0,__zero_reg__"
[(set_attr "length" "7")
(set_attr "cc" "clobber")])
(define_expand "mulsqipsi3"
[(parallel [(set (match_operand:PSI 0 "pseudo_register_operand" "")
(mult:PSI (sign_extend:PSI (match_operand:QI 1 "pseudo_register_operand" ""))
(match_operand:PSI 2 "pseudo_register_or_const_int_operand""")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))])]
"AVR_HAVE_MUL"
{
avr_fix_inputs (operands, (1 << 1) | (1 << 2), -1u);
if (avr_emit3_fix_outputs (gen_mulsqipsi3, operands, 1 << 0,
regmask (DImode, 18) | regmask (HImode, 26)))
DONE;
})
(define_insn_and_split "*mulsqipsi3"
[(set (match_operand:PSI 0 "pseudo_register_operand" "=r")
(mult:PSI (sign_extend:PSI (match_operand:QI 1 "pseudo_register_operand" "r"))
(match_operand:PSI 2 "pseudo_register_or_const_int_operand" "rn")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))]
"AVR_HAVE_MUL && !reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:QI 25)
(match_dup 1))
(set (reg:PSI 22)
(match_dup 2))
(set (reg:PSI 18)
(mult:PSI (sign_extend:PSI (reg:QI 25))
(reg:PSI 22)))
(set (match_dup 0)
(reg:PSI 18))])
(define_insn_and_split "*mulpsi3"
[(set (match_operand:PSI 0 "pseudo_register_operand" "=r")
(mult:PSI (match_operand:PSI 1 "pseudo_register_operand" "r")
(match_operand:PSI 2 "pseudo_register_or_const_int_operand" "rn")))
(clobber (reg:HI 26))
(clobber (reg:DI 18))]
"AVR_HAVE_MUL && !reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:PSI 18)
(match_dup 1))
(set (reg:PSI 22)
(match_dup 2))
(parallel [(set (reg:PSI 22)
(mult:PSI (reg:PSI 22)
(reg:PSI 18)))
(clobber (reg:QI 21))
(clobber (reg:QI 25))
(clobber (reg:HI 26))])
(set (match_dup 0)
(reg:PSI 22))]
{
if (s8_operand (operands[2], PSImode))
{
rtx reg = force_reg (QImode, gen_int_mode (INTVAL (operands[2]), QImode));
emit_insn (gen_mulsqipsi3 (operands[0], reg, operands[1]));
DONE;
}
})
(define_insn "*mulsqipsi3.libgcc"
[(set (reg:PSI 18)
(mult:PSI (sign_extend:PSI (reg:QI 25))
(reg:PSI 22)))]
"AVR_HAVE_MUL"
"%~call __mulsqipsi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*mulpsi3.libgcc"
[(set (reg:PSI 22)
(mult:PSI (reg:PSI 22)
(reg:PSI 18)))
(clobber (reg:QI 21))
(clobber (reg:QI 25))
(clobber (reg:HI 26))]
"AVR_HAVE_MUL"
"%~call __mulpsi3"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; 24-bit signed/unsigned division and modulo.
;; Notice that the libgcc implementation return the quotient in R22
;; and the remainder in R18 whereas the 32-bit [u]divmodsi4
;; implementation works the other way round.
(define_insn_and_split "divmodpsi4"
[(parallel [(set (match_operand:PSI 0 "pseudo_register_operand" "")
(div:PSI (match_operand:PSI 1 "pseudo_register_operand" "")
(match_operand:PSI 2 "pseudo_register_operand" "")))
(set (match_operand:PSI 3 "pseudo_register_operand" "")
(mod:PSI (match_dup 1)
(match_dup 2)))
(clobber (reg:DI 18))
(clobber (reg:QI 26))])]
""
{ gcc_unreachable(); }
""
[(set (reg:PSI 22) (match_dup 1))
(set (reg:PSI 18) (match_dup 2))
(parallel [(set (reg:PSI 22) (div:PSI (reg:PSI 22) (reg:PSI 18)))
(set (reg:PSI 18) (mod:PSI (reg:PSI 22) (reg:PSI 18)))
(clobber (reg:QI 21))
(clobber (reg:QI 25))
(clobber (reg:QI 26))])
(set (match_dup 0) (reg:PSI 22))
(set (match_dup 3) (reg:PSI 18))])
(define_insn "*divmodpsi4_call"
[(set (reg:PSI 22) (div:PSI (reg:PSI 22) (reg:PSI 18)))
(set (reg:PSI 18) (mod:PSI (reg:PSI 22) (reg:PSI 18)))
(clobber (reg:QI 21))
(clobber (reg:QI 25))
(clobber (reg:QI 26))]
""
"%~call __divmodpsi4"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn_and_split "udivmodpsi4"
[(parallel [(set (match_operand:PSI 0 "pseudo_register_operand" "")
(udiv:PSI (match_operand:PSI 1 "pseudo_register_operand" "")
(match_operand:PSI 2 "pseudo_register_operand" "")))
(set (match_operand:PSI 3 "pseudo_register_operand" "")
(umod:PSI (match_dup 1)
(match_dup 2)))
(clobber (reg:DI 18))
(clobber (reg:QI 26))])]
""
{ gcc_unreachable(); }
""
[(set (reg:PSI 22) (match_dup 1))
(set (reg:PSI 18) (match_dup 2))
(parallel [(set (reg:PSI 22) (udiv:PSI (reg:PSI 22) (reg:PSI 18)))
(set (reg:PSI 18) (umod:PSI (reg:PSI 22) (reg:PSI 18)))
(clobber (reg:QI 21))
(clobber (reg:QI 25))
(clobber (reg:QI 26))])
(set (match_dup 0) (reg:PSI 22))
(set (match_dup 3) (reg:PSI 18))])
(define_insn "*udivmodpsi4_call"
[(set (reg:PSI 22) (udiv:PSI (reg:PSI 22) (reg:PSI 18)))
(set (reg:PSI 18) (umod:PSI (reg:PSI 22) (reg:PSI 18)))
(clobber (reg:QI 21))
(clobber (reg:QI 25))
(clobber (reg:QI 26))]
""
"%~call __udivmodpsi4"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(define_insn_and_split "divmodsi4"
[(parallel [(set (match_operand:SI 0 "pseudo_register_operand" "")
(div:SI (match_operand:SI 1 "pseudo_register_operand" "")
(match_operand:SI 2 "pseudo_register_operand" "")))
(set (match_operand:SI 3 "pseudo_register_operand" "")
(mod:SI (match_dup 1) (match_dup 2)))
(clobber (reg:SI 18))
(clobber (reg:SI 22))
(clobber (reg:HI 26))
(clobber (reg:HI 30))])]
""
"this divmodsi4 pattern should have been splitted;"
""
[(set (reg:SI 22) (match_dup 1))
(set (reg:SI 18) (match_dup 2))
(parallel [(set (reg:SI 18) (div:SI (reg:SI 22) (reg:SI 18)))
(set (reg:SI 22) (mod:SI (reg:SI 22) (reg:SI 18)))
(clobber (reg:HI 26))
(clobber (reg:HI 30))])
(set (match_dup 0) (reg:SI 18))
(set (match_dup 3) (reg:SI 22))])
(define_insn "*divmodsi4_call"
[(set (reg:SI 18) (div:SI (reg:SI 22) (reg:SI 18)))
(set (reg:SI 22) (mod:SI (reg:SI 22) (reg:SI 18)))
(clobber (reg:HI 26))
(clobber (reg:HI 30))]
""
"%~call __divmodsi4"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn_and_split "udivmodsi4"
[(parallel [(set (match_operand:SI 0 "pseudo_register_operand" "")
(udiv:SI (match_operand:SI 1 "pseudo_register_operand" "")
(match_operand:SI 2 "pseudo_register_operand" "")))
(set (match_operand:SI 3 "pseudo_register_operand" "")
(umod:SI (match_dup 1) (match_dup 2)))
(clobber (reg:SI 18))
(clobber (reg:SI 22))
(clobber (reg:HI 26))
(clobber (reg:HI 30))])]
""
"this udivmodsi4 pattern should have been splitted;"
""
[(set (reg:SI 22) (match_dup 1))
(set (reg:SI 18) (match_dup 2))
(parallel [(set (reg:SI 18) (udiv:SI (reg:SI 22) (reg:SI 18)))
(set (reg:SI 22) (umod:SI (reg:SI 22) (reg:SI 18)))
(clobber (reg:HI 26))
(clobber (reg:HI 30))])
(set (match_dup 0) (reg:SI 18))
(set (match_dup 3) (reg:SI 22))])
(define_insn "*udivmodsi4_call"
[(set (reg:SI 18) (udiv:SI (reg:SI 22) (reg:SI 18)))
(set (reg:SI 22) (umod:SI (reg:SI 22) (reg:SI 18)))
(clobber (reg:HI 26))
(clobber (reg:HI 30))]
""
"%~call __udivmodsi4"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
; and
(define_insn "andqi3"
[(set (match_operand:QI 0 "register_operand" "=??r,d,*l")
(and:QI (match_operand:QI 1 "register_operand" "%0,0,0")
(match_operand:QI 2 "nonmemory_operand" "r,i,Ca1")))]
""
"@
and %0,%2
andi %0,lo8(%2)
* return avr_out_bitop (insn, operands, NULL);"
[(set_attr "length" "1,1,2")
(set_attr "cc" "set_zn,set_zn,none")])
(define_insn "andhi3"
[(set (match_operand:HI 0 "register_operand" "=??r,d,d,r ,r")
(and:HI (match_operand:HI 1 "register_operand" "%0,0,0,0 ,0")
(match_operand:HI 2 "nonmemory_operand" "r,s,n,Ca2,n")))
(clobber (match_scratch:QI 3 "=X,X,X,X ,&d"))]
""
{
if (which_alternative == 0)
return "and %A0,%A2\;and %B0,%B2";
else if (which_alternative == 1)
return "andi %A0,lo8(%2)\;andi %B0,hi8(%2)";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "2,2,2,4,4")
(set_attr "adjust_len" "*,*,out_bitop,out_bitop,out_bitop")
(set_attr "cc" "set_n,set_n,clobber,clobber,clobber")])
(define_insn "andpsi3"
[(set (match_operand:PSI 0 "register_operand" "=??r,d,r ,r")
(and:PSI (match_operand:PSI 1 "register_operand" "%0,0,0 ,0")
(match_operand:PSI 2 "nonmemory_operand" "r,n,Ca3,n")))
(clobber (match_scratch:QI 3 "=X,X,X ,&d"))]
""
{
if (which_alternative == 0)
return "and %A0,%A2" CR_TAB
"and %B0,%B2" CR_TAB
"and %C0,%C2";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "3,3,6,6")
(set_attr "adjust_len" "*,out_bitop,out_bitop,out_bitop")
(set_attr "cc" "set_n,clobber,clobber,clobber")])
(define_insn "andsi3"
[(set (match_operand:SI 0 "register_operand" "=??r,d,r ,r")
(and:SI (match_operand:SI 1 "register_operand" "%0,0,0 ,0")
(match_operand:SI 2 "nonmemory_operand" "r,n,Ca4,n")))
(clobber (match_scratch:QI 3 "=X,X,X ,&d"))]
""
{
if (which_alternative == 0)
return "and %0,%2" CR_TAB
"and %B0,%B2" CR_TAB
"and %C0,%C2" CR_TAB
"and %D0,%D2";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "4,4,8,8")
(set_attr "adjust_len" "*,out_bitop,out_bitop,out_bitop")
(set_attr "cc" "set_n,clobber,clobber,clobber")])
(define_peephole2 ; andi
[(set (match_operand:QI 0 "d_register_operand" "")
(and:QI (match_dup 0)
(match_operand:QI 1 "const_int_operand" "")))
(set (match_dup 0)
(and:QI (match_dup 0)
(match_operand:QI 2 "const_int_operand" "")))]
""
[(set (match_dup 0) (and:QI (match_dup 0) (match_dup 1)))]
{
operands[1] = GEN_INT (INTVAL (operands[1]) & INTVAL (operands[2]));
})
;;|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
;; ior
(define_insn "iorqi3"
[(set (match_operand:QI 0 "register_operand" "=??r,d,*l")
(ior:QI (match_operand:QI 1 "register_operand" "%0,0,0")
(match_operand:QI 2 "nonmemory_operand" "r,i,Co1")))]
""
"@
or %0,%2
ori %0,lo8(%2)
* return avr_out_bitop (insn, operands, NULL);"
[(set_attr "length" "1,1,2")
(set_attr "cc" "set_zn,set_zn,none")])
(define_insn "iorhi3"
[(set (match_operand:HI 0 "register_operand" "=??r,d,d,r ,r")
(ior:HI (match_operand:HI 1 "register_operand" "%0,0,0,0 ,0")
(match_operand:HI 2 "nonmemory_operand" "r,s,n,Co2,n")))
(clobber (match_scratch:QI 3 "=X,X,X,X ,&d"))]
""
{
if (which_alternative == 0)
return "or %A0,%A2\;or %B0,%B2";
else if (which_alternative == 1)
return "ori %A0,lo8(%2)\;ori %B0,hi8(%2)";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "2,2,2,4,4")
(set_attr "adjust_len" "*,*,out_bitop,out_bitop,out_bitop")
(set_attr "cc" "set_n,set_n,clobber,clobber,clobber")])
(define_insn "iorpsi3"
[(set (match_operand:PSI 0 "register_operand" "=??r,d,r ,r")
(ior:PSI (match_operand:PSI 1 "register_operand" "%0,0,0 ,0")
(match_operand:PSI 2 "nonmemory_operand" "r,n,Co3,n")))
(clobber (match_scratch:QI 3 "=X,X,X ,&d"))]
""
{
if (which_alternative == 0)
return "or %A0,%A2" CR_TAB
"or %B0,%B2" CR_TAB
"or %C0,%C2";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "3,3,6,6")
(set_attr "adjust_len" "*,out_bitop,out_bitop,out_bitop")
(set_attr "cc" "set_n,clobber,clobber,clobber")])
(define_insn "iorsi3"
[(set (match_operand:SI 0 "register_operand" "=??r,d,r ,r")
(ior:SI (match_operand:SI 1 "register_operand" "%0,0,0 ,0")
(match_operand:SI 2 "nonmemory_operand" "r,n,Co4,n")))
(clobber (match_scratch:QI 3 "=X,X,X ,&d"))]
""
{
if (which_alternative == 0)
return "or %0,%2" CR_TAB
"or %B0,%B2" CR_TAB
"or %C0,%C2" CR_TAB
"or %D0,%D2";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "4,4,8,8")
(set_attr "adjust_len" "*,out_bitop,out_bitop,out_bitop")
(set_attr "cc" "set_n,clobber,clobber,clobber")])
;;^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
;; xor
(define_insn "xorqi3"
[(set (match_operand:QI 0 "register_operand" "=r")
(xor:QI (match_operand:QI 1 "register_operand" "%0")
(match_operand:QI 2 "register_operand" "r")))]
""
"eor %0,%2"
[(set_attr "length" "1")
(set_attr "cc" "set_zn")])
(define_insn "xorhi3"
[(set (match_operand:HI 0 "register_operand" "=??r,r ,r")
(xor:HI (match_operand:HI 1 "register_operand" "%0,0 ,0")
(match_operand:HI 2 "nonmemory_operand" "r,Cx2,n")))
(clobber (match_scratch:QI 3 "=X,X ,&d"))]
""
{
if (which_alternative == 0)
return "eor %A0,%A2\;eor %B0,%B2";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "2,2,4")
(set_attr "adjust_len" "*,out_bitop,out_bitop")
(set_attr "cc" "set_n,clobber,clobber")])
(define_insn "xorpsi3"
[(set (match_operand:PSI 0 "register_operand" "=??r,r ,r")
(xor:PSI (match_operand:PSI 1 "register_operand" "%0,0 ,0")
(match_operand:PSI 2 "nonmemory_operand" "r,Cx3,n")))
(clobber (match_scratch:QI 3 "=X,X ,&d"))]
""
{
if (which_alternative == 0)
return "eor %A0,%A2" CR_TAB
"eor %B0,%B2" CR_TAB
"eor %C0,%C2";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "3,6,6")
(set_attr "adjust_len" "*,out_bitop,out_bitop")
(set_attr "cc" "set_n,clobber,clobber")])
(define_insn "xorsi3"
[(set (match_operand:SI 0 "register_operand" "=??r,r ,r")
(xor:SI (match_operand:SI 1 "register_operand" "%0,0 ,0")
(match_operand:SI 2 "nonmemory_operand" "r,Cx4,n")))
(clobber (match_scratch:QI 3 "=X,X ,&d"))]
""
{
if (which_alternative == 0)
return "eor %0,%2" CR_TAB
"eor %B0,%B2" CR_TAB
"eor %C0,%C2" CR_TAB
"eor %D0,%D2";
return avr_out_bitop (insn, operands, NULL);
}
[(set_attr "length" "4,8,8")
(set_attr "adjust_len" "*,out_bitop,out_bitop")
(set_attr "cc" "set_n,clobber,clobber")])
(define_split
[(set (match_operand:SPLIT34 0 "register_operand")
(match_operand:SPLIT34 1 "register_operand"))]
"optimize
&& reload_completed"
[(set (match_dup 2) (match_dup 3))
(set (match_dup 4) (match_dup 5))]
{
machine_mode mode_hi = 4 == GET_MODE_SIZE (mode) ? HImode : QImode;
bool lo_first = REGNO (operands[0]) < REGNO (operands[1]);
rtx dst_lo = simplify_gen_subreg (HImode, operands[0], mode, 0);
rtx src_lo = simplify_gen_subreg (HImode, operands[1], mode, 0);
rtx dst_hi = simplify_gen_subreg (mode_hi, operands[0], mode, 2);
rtx src_hi = simplify_gen_subreg (mode_hi, operands[1], mode, 2);
operands[2] = lo_first ? dst_lo : dst_hi;
operands[3] = lo_first ? src_lo : src_hi;
operands[4] = lo_first ? dst_hi : dst_lo;
operands[5] = lo_first ? src_hi : src_lo;
})
(define_split
[(set (match_operand:HI 0 "register_operand")
(match_operand:HI 1 "reg_or_0_operand"))]
"optimize
&& reload_completed
&& (!AVR_HAVE_MOVW
|| const0_rtx == operands[1])"
[(set (match_dup 2) (match_dup 3))
(set (match_dup 4) (match_dup 5))]
{
operands[2] = simplify_gen_subreg (QImode, operands[0], HImode, 1);
operands[3] = simplify_gen_subreg (QImode, operands[1], HImode, 1);
operands[4] = simplify_gen_subreg (QImode, operands[0], HImode, 0);
operands[5] = simplify_gen_subreg (QImode, operands[1], HImode, 0);
})
;; Split andhi3, andpsi3, andsi3.
;; Split iorhi3, iorpsi3, iorsi3.
;; Split xorhi3, xorpsi3, xorsi3.
(define_split
[(parallel [(set (match_operand:HISI 0 "register_operand")
(bitop:HISI (match_dup 0)
(match_operand:HISI 1 "register_operand")))
(clobber (scratch:QI))])]
"optimize
&& reload_completed"
[(const_int 1)]
{
for (int i = 0; i < GET_MODE_SIZE (mode); i++)
{
rtx dst = simplify_gen_subreg (QImode, operands[0], mode, i);
rtx src = simplify_gen_subreg (QImode, operands[1], mode, i);
emit_insn (gen_qi3 (dst, dst, src));
}
DONE;
})
;; swap swap swap swap swap swap swap swap swap swap swap swap swap swap swap
;; swap
(define_expand "rotlqi3"
[(set (match_operand:QI 0 "register_operand" "")
(rotate:QI (match_operand:QI 1 "register_operand" "")
(match_operand:QI 2 "const_0_to_7_operand" "")))]
""
{
if (!CONST_INT_P (operands[2]))
FAIL;
operands[2] = gen_int_mode (INTVAL (operands[2]) & 7, QImode);
})
;; Expander used by __builtin_avr_swap
(define_expand "rotlqi3_4"
[(set (match_operand:QI 0 "register_operand" "")
(rotate:QI (match_operand:QI 1 "register_operand" "")
(const_int 4)))])
(define_insn "*rotlqi3"
[(set (match_operand:QI 0 "register_operand" "=r,r,r ,r ,r ,r ,r ,r")
(rotate:QI (match_operand:QI 1 "register_operand" "0,0,0 ,0 ,0 ,0 ,0 ,0")
(match_operand:QI 2 "const_0_to_7_operand" "P,K,C03,C04,C05,C06,C07,L")))]
""
"@
lsl %0\;adc %0,__zero_reg__
lsl %0\;adc %0,__zero_reg__\;lsl %0\;adc %0,__zero_reg__
swap %0\;bst %0,0\;ror %0\;bld %0,7
swap %0
swap %0\;lsl %0\;adc %0,__zero_reg__
swap %0\;lsl %0\;adc %0,__zero_reg__\;lsl %0\;adc %0,__zero_reg__
bst %0,0\;ror %0\;bld %0,7
" ; empty
[(set_attr "length" "2,4,4,1,3,5,3,0")
(set_attr "cc" "set_n,set_n,clobber,none,set_n,set_n,clobber,none")])
;; Split all rotates of HI,SI and PSImode registers where rotation is by
;; a whole number of bytes. The split creates the appropriate moves and
;; considers all overlap situations.
;; HImode does not need scratch. Use attribute for this constraint.
(define_mode_attr rotx [(SI "&r,&r,X") (PSI "&r,&r,X") (HI "X,X,X")])
(define_mode_attr rotsmode [(SI "HI") (PSI "QI") (HI "QI")])
;; "rotlhi3"
;; "rotlpsi3"
;; "rotlsi3"
(define_expand "rotl3"
[(parallel [(set (match_operand:HISI 0 "register_operand" "")
(rotate:HISI (match_operand:HISI 1 "register_operand" "")
(match_operand:HISI 2 "const_int_operand" "")))
(clobber (match_dup 3))])]
""
{
int offset;
if (!CONST_INT_P (operands[2]))
FAIL;
offset = INTVAL (operands[2]);
if (0 == offset % 8)
{
if (AVR_HAVE_MOVW && 0 == offset % 16)
operands[3] = gen_rtx_SCRATCH (mode);
else
operands[3] = gen_rtx_SCRATCH (QImode);
}
else if (offset == 1
|| offset == GET_MODE_BITSIZE (mode) -1)
{
/*; Support rotate left/right by 1 */
emit_move_insn (operands[0],
gen_rtx_ROTATE (mode, operands[1], operands[2]));
DONE;
}
else
FAIL;
})
(define_insn "*rotlhi2.1"
[(set (match_operand:HI 0 "register_operand" "=r")
(rotate:HI (match_operand:HI 1 "register_operand" "0")
(const_int 1)))]
""
"lsl %A0\;rol %B0\;adc %A0,__zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_insn "*rotlhi2.15"
[(set (match_operand:HI 0 "register_operand" "=r")
(rotate:HI (match_operand:HI 1 "register_operand" "0")
(const_int 15)))]
""
"bst %A0,0\;ror %B0\;ror %A0\;bld %B0,7"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*rotlpsi2.1"
[(set (match_operand:PSI 0 "register_operand" "=r")
(rotate:PSI (match_operand:PSI 1 "register_operand" "0")
(const_int 1)))]
""
"lsl %A0\;rol %B0\;rol %C0\;adc %A0,__zero_reg__"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*rotlpsi2.23"
[(set (match_operand:PSI 0 "register_operand" "=r")
(rotate:PSI (match_operand:PSI 1 "register_operand" "0")
(const_int 23)))]
""
"bst %A0,0\;ror %C0\;ror %B0\;ror %A0\;bld %C0,7"
[(set_attr "length" "5")
(set_attr "cc" "clobber")])
(define_insn "*rotlsi2.1"
[(set (match_operand:SI 0 "register_operand" "=r")
(rotate:SI (match_operand:SI 1 "register_operand" "0")
(const_int 1)))]
""
"lsl %A0\;rol %B0\;rol %C0\;rol %D0\;adc %A0,__zero_reg__"
[(set_attr "length" "5")
(set_attr "cc" "clobber")])
(define_insn "*rotlsi2.31"
[(set (match_operand:SI 0 "register_operand" "=r")
(rotate:SI (match_operand:SI 1 "register_operand" "0")
(const_int 31)))]
""
"bst %A0,0\;ror %D0\;ror %C0\;ror %B0\;ror %A0\;bld %D0,7"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
;; Overlapping non-HImode registers often (but not always) need a scratch.
;; The best we can do is use early clobber alternative "#&r" so that
;; completely non-overlapping operands dont get a scratch but # so register
;; allocation does not prefer non-overlapping.
;; Split word aligned rotates using scratch that is mode dependent.
;; "*rotwhi"
;; "*rotwsi"
(define_insn_and_split "*rotw"
[(set (match_operand:HISI 0 "register_operand" "=r,r,#&r")
(rotate:HISI (match_operand:HISI 1 "register_operand" "0,r,r")
(match_operand 2 "const_int_operand" "n,n,n")))
(clobber (match_scratch: 3 "="))]
"AVR_HAVE_MOVW
&& CONST_INT_P (operands[2])
&& GET_MODE_SIZE (mode) % 2 == 0
&& 0 == INTVAL (operands[2]) % 16"
"#"
"&& reload_completed"
[(const_int 0)]
{
avr_rotate_bytes (operands);
DONE;
})
;; Split byte aligned rotates using scratch that is always QI mode.
;; "*rotbhi"
;; "*rotbpsi"
;; "*rotbsi"
(define_insn_and_split "*rotb"
[(set (match_operand:HISI 0 "register_operand" "=r,r,#&r")
(rotate:HISI (match_operand:HISI 1 "register_operand" "0,r,r")
(match_operand 2 "const_int_operand" "n,n,n")))
(clobber (match_scratch:QI 3 "="))]
"CONST_INT_P (operands[2])
&& (8 == INTVAL (operands[2]) % 16
|| ((!AVR_HAVE_MOVW
|| GET_MODE_SIZE (mode) % 2 != 0)
&& 0 == INTVAL (operands[2]) % 16))"
"#"
"&& reload_completed"
[(const_int 0)]
{
avr_rotate_bytes (operands);
DONE;
})
;;<< << << << << << << << << << << << << << << << << << << << << << << << << <<
;; arithmetic shift left
;; "ashlqi3"
;; "ashlqq3" "ashluqq3"
(define_expand "ashl3"
[(set (match_operand:ALL1 0 "register_operand" "")
(ashift:ALL1 (match_operand:ALL1 1 "register_operand" "")
(match_operand:QI 2 "nop_general_operand" "")))])
(define_split ; ashlqi3_const4
[(set (match_operand:ALL1 0 "d_register_operand" "")
(ashift:ALL1 (match_dup 0)
(const_int 4)))]
""
[(set (match_dup 1)
(rotate:QI (match_dup 1)
(const_int 4)))
(set (match_dup 1)
(and:QI (match_dup 1)
(const_int -16)))]
{
operands[1] = avr_to_int_mode (operands[0]);
})
(define_split ; ashlqi3_const5
[(set (match_operand:ALL1 0 "d_register_operand" "")
(ashift:ALL1 (match_dup 0)
(const_int 5)))]
""
[(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4)))
(set (match_dup 1) (ashift:QI (match_dup 1) (const_int 1)))
(set (match_dup 1) (and:QI (match_dup 1) (const_int -32)))]
{
operands[1] = avr_to_int_mode (operands[0]);
})
(define_split ; ashlqi3_const6
[(set (match_operand:ALL1 0 "d_register_operand" "")
(ashift:ALL1 (match_dup 0)
(const_int 6)))]
""
[(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4)))
(set (match_dup 1) (ashift:QI (match_dup 1) (const_int 2)))
(set (match_dup 1) (and:QI (match_dup 1) (const_int -64)))]
{
operands[1] = avr_to_int_mode (operands[0]);
})
;; "*ashlqi3"
;; "*ashlqq3" "*ashluqq3"
(define_insn "*ashl3"
[(set (match_operand:ALL1 0 "register_operand" "=r,r,r,r,!d,r,r")
(ashift:ALL1 (match_operand:ALL1 1 "register_operand" "0,0,0,0,0 ,0,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,K,n ,n,Qm")))]
""
{
return ashlqi3_out (insn, operands, NULL);
}
[(set_attr "length" "5,0,1,2,4,6,9")
(set_attr "adjust_len" "ashlqi")
(set_attr "cc" "clobber,none,set_czn,set_czn,set_czn,set_czn,clobber")])
(define_insn "ashl3"
[(set (match_operand:ALL2 0 "register_operand" "=r,r,r,r,r,r,r")
(ashift:ALL2 (match_operand:ALL2 1 "register_operand" "0,0,0,r,0,0,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,O,K,n,Qm")))]
""
{
return ashlhi3_out (insn, operands, NULL);
}
[(set_attr "length" "6,0,2,2,4,10,10")
(set_attr "adjust_len" "ashlhi")
(set_attr "cc" "clobber,none,set_n,clobber,set_n,clobber,clobber")])
;; Insns like the following are generated when (implicitly) extending 8-bit shifts
;; like char1 = char2 << char3. Only the low-byte is needed in that situation.
;; "*ashluqihiqi3"
;; "*ashlsqihiqi3"
(define_insn_and_split "*ashlqihiqi3"
[(set (match_operand:QI 0 "register_operand" "=r")
(subreg:QI (ashift:HI (any_extend:HI (match_operand:QI 1 "register_operand" "0"))
(match_operand:QI 2 "register_operand" "r"))
0))]
""
"#"
""
[(set (match_dup 0)
(ashift:QI (match_dup 1)
(match_dup 2)))])
;; ??? Combiner does not recognize that it could split the following insn;
;; presumably because he has no register handy?
;; "*ashluqihiqi3.mem"
;; "*ashlsqihiqi3.mem"
(define_insn_and_split "*ashlqihiqi3.mem"
[(set (match_operand:QI 0 "memory_operand" "=m")
(subreg:QI (ashift:HI (any_extend:HI (match_operand:QI 1 "register_operand" "r"))
(match_operand:QI 2 "register_operand" "r"))
0))]
"!reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (match_dup 3)
(ashift:QI (match_dup 1)
(match_dup 2)))
(set (match_dup 0)
(match_dup 3))]
{
operands[3] = gen_reg_rtx (QImode);
})
;; Similar.
(define_insn_and_split "*ashlhiqi3"
[(set (match_operand:QI 0 "nonimmediate_operand" "=r")
(subreg:QI (ashift:HI (match_operand:HI 1 "register_operand" "0")
(match_operand:QI 2 "register_operand" "r")) 0))]
"!reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (match_dup 4)
(ashift:QI (match_dup 3)
(match_dup 2)))
(set (match_dup 0)
(match_dup 4))]
{
operands[3] = simplify_gen_subreg (QImode, operands[1], HImode, 0);
operands[4] = gen_reg_rtx (QImode);
})
;; High part of 16-bit shift is unused after the instruction:
;; No need to compute it, map to 8-bit shift.
(define_peephole2
[(set (match_operand:HI 0 "register_operand" "")
(ashift:HI (match_dup 0)
(match_operand:QI 1 "register_operand" "")))]
""
[(set (match_dup 2)
(ashift:QI (match_dup 2)
(match_dup 1)))
(clobber (match_dup 3))]
{
operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 1);
if (!peep2_reg_dead_p (1, operands[3]))
FAIL;
operands[2] = simplify_gen_subreg (QImode, operands[0], HImode, 0);
})
;; "ashlsi3"
;; "ashlsq3" "ashlusq3"
;; "ashlsa3" "ashlusa3"
(define_insn "ashl3"
[(set (match_operand:ALL4 0 "register_operand" "=r,r,r,r,r,r,r")
(ashift:ALL4 (match_operand:ALL4 1 "register_operand" "0,0,0,r,0,0,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,O,K,n,Qm")))]
""
{
return ashlsi3_out (insn, operands, NULL);
}
[(set_attr "length" "8,0,4,4,8,10,12")
(set_attr "adjust_len" "ashlsi")
(set_attr "cc" "clobber,none,set_n,clobber,set_n,clobber,clobber")])
;; Optimize if a scratch register from LD_REGS happens to be available.
(define_peephole2 ; ashlqi3_l_const4
[(set (match_operand:ALL1 0 "l_register_operand" "")
(ashift:ALL1 (match_dup 0)
(const_int 4)))
(match_scratch:QI 1 "d")]
""
[(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4)))
(set (match_dup 1) (const_int -16))
(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1)))]
{
operands[2] = avr_to_int_mode (operands[0]);
})
(define_peephole2 ; ashlqi3_l_const5
[(set (match_operand:ALL1 0 "l_register_operand" "")
(ashift:ALL1 (match_dup 0)
(const_int 5)))
(match_scratch:QI 1 "d")]
""
[(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4)))
(set (match_dup 2) (ashift:QI (match_dup 2) (const_int 1)))
(set (match_dup 1) (const_int -32))
(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1)))]
{
operands[2] = avr_to_int_mode (operands[0]);
})
(define_peephole2 ; ashlqi3_l_const6
[(set (match_operand:ALL1 0 "l_register_operand" "")
(ashift:ALL1 (match_dup 0)
(const_int 6)))
(match_scratch:QI 1 "d")]
""
[(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4)))
(set (match_dup 2) (ashift:QI (match_dup 2) (const_int 2)))
(set (match_dup 1) (const_int -64))
(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1)))]
{
operands[2] = avr_to_int_mode (operands[0]);
})
(define_peephole2
[(match_scratch:QI 3 "d")
(set (match_operand:ALL2 0 "register_operand" "")
(ashift:ALL2 (match_operand:ALL2 1 "register_operand" "")
(match_operand:QI 2 "const_int_operand" "")))]
""
[(parallel [(set (match_dup 0)
(ashift:ALL2 (match_dup 1)
(match_dup 2)))
(clobber (match_dup 3))])])
;; "*ashlhi3_const"
;; "*ashlhq3_const" "*ashluhq3_const"
;; "*ashlha3_const" "*ashluha3_const"
(define_insn "*ashl3_const"
[(set (match_operand:ALL2 0 "register_operand" "=r,r,r,r,r")
(ashift:ALL2 (match_operand:ALL2 1 "register_operand" "0,0,r,0,0")
(match_operand:QI 2 "const_int_operand" "L,P,O,K,n")))
(clobber (match_scratch:QI 3 "=X,X,X,X,&d"))]
"reload_completed"
{
return ashlhi3_out (insn, operands, NULL);
}
[(set_attr "length" "0,2,2,4,10")
(set_attr "adjust_len" "ashlhi")
(set_attr "cc" "none,set_n,clobber,set_n,clobber")])
(define_peephole2
[(match_scratch:QI 3 "d")
(set (match_operand:ALL4 0 "register_operand" "")
(ashift:ALL4 (match_operand:ALL4 1 "register_operand" "")
(match_operand:QI 2 "const_int_operand" "")))]
""
[(parallel [(set (match_dup 0)
(ashift:ALL4 (match_dup 1)
(match_dup 2)))
(clobber (match_dup 3))])])
;; "*ashlsi3_const"
;; "*ashlsq3_const" "*ashlusq3_const"
;; "*ashlsa3_const" "*ashlusa3_const"
(define_insn "*ashl3_const"
[(set (match_operand:ALL4 0 "register_operand" "=r,r,r,r")
(ashift:ALL4 (match_operand:ALL4 1 "register_operand" "0,0,r,0")
(match_operand:QI 2 "const_int_operand" "L,P,O,n")))
(clobber (match_scratch:QI 3 "=X,X,X,&d"))]
"reload_completed"
{
return ashlsi3_out (insn, operands, NULL);
}
[(set_attr "length" "0,4,4,10")
(set_attr "adjust_len" "ashlsi")
(set_attr "cc" "none,set_n,clobber,clobber")])
(define_expand "ashlpsi3"
[(parallel [(set (match_operand:PSI 0 "register_operand" "")
(ashift:PSI (match_operand:PSI 1 "register_operand" "")
(match_operand:QI 2 "nonmemory_operand" "")))
(clobber (scratch:QI))])]
""
{
if (AVR_HAVE_MUL
&& CONST_INT_P (operands[2]))
{
if (IN_RANGE (INTVAL (operands[2]), 3, 6))
{
rtx xoffset = force_reg (QImode, gen_int_mode (1 << INTVAL (operands[2]), QImode));
emit_insn (gen_mulsqipsi3 (operands[0], xoffset, operands[1]));
DONE;
}
else if (optimize_insn_for_speed_p ()
&& INTVAL (operands[2]) != 16
&& IN_RANGE (INTVAL (operands[2]), 9, 22))
{
rtx xoffset = force_reg (PSImode, gen_int_mode (1 << INTVAL (operands[2]), PSImode));
emit_insn (gen_mulpsi3 (operands[0], operands[1], xoffset));
DONE;
}
}
})
(define_insn "*ashlpsi3"
[(set (match_operand:PSI 0 "register_operand" "=r,r,r,r")
(ashift:PSI (match_operand:PSI 1 "register_operand" "0,0,r,0")
(match_operand:QI 2 "nonmemory_operand" "r,P,O,n")))
(clobber (match_scratch:QI 3 "=X,X,X,&d"))]
""
{
return avr_out_ashlpsi3 (insn, operands, NULL);
}
[(set_attr "adjust_len" "ashlpsi")
(set_attr "cc" "clobber")])
;; >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>
;; arithmetic shift right
;; "ashrqi3"
;; "ashrqq3" "ashruqq3"
(define_insn "ashr3"
[(set (match_operand:ALL1 0 "register_operand" "=r,r,r,r,r ,r ,r")
(ashiftrt:ALL1 (match_operand:ALL1 1 "register_operand" "0,0,0,0,0 ,0 ,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,K,C03 C04 C05,C06 C07,Qm")))]
""
{
return ashrqi3_out (insn, operands, NULL);
}
[(set_attr "length" "5,0,1,2,5,4,9")
(set_attr "adjust_len" "ashrqi")
(set_attr "cc" "clobber,none,set_czn,set_czn,set_czn,clobber,clobber")])
;; "ashrhi3"
;; "ashrhq3" "ashruhq3"
;; "ashrha3" "ashruha3"
(define_insn "ashr3"
[(set (match_operand:ALL2 0 "register_operand" "=r,r,r,r,r,r,r")
(ashiftrt:ALL2 (match_operand:ALL2 1 "register_operand" "0,0,0,r,0,0,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,O,K,n,Qm")))]
""
{
return ashrhi3_out (insn, operands, NULL);
}
[(set_attr "length" "6,0,2,4,4,10,10")
(set_attr "adjust_len" "ashrhi")
(set_attr "cc" "clobber,none,clobber,set_n,clobber,clobber,clobber")])
(define_insn "ashrpsi3"
[(set (match_operand:PSI 0 "register_operand" "=r,r,r,r,r")
(ashiftrt:PSI (match_operand:PSI 1 "register_operand" "0,0,0,r,0")
(match_operand:QI 2 "nonmemory_operand" "r,P,K,O,n")))
(clobber (match_scratch:QI 3 "=X,X,X,X,&d"))]
""
{
return avr_out_ashrpsi3 (insn, operands, NULL);
}
[(set_attr "adjust_len" "ashrpsi")
(set_attr "cc" "clobber")])
;; "ashrsi3"
;; "ashrsq3" "ashrusq3"
;; "ashrsa3" "ashrusa3"
(define_insn "ashr3"
[(set (match_operand:ALL4 0 "register_operand" "=r,r,r,r,r,r,r")
(ashiftrt:ALL4 (match_operand:ALL4 1 "register_operand" "0,0,0,r,0,0,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,O,K,n,Qm")))]
""
{
return ashrsi3_out (insn, operands, NULL);
}
[(set_attr "length" "8,0,4,6,8,10,12")
(set_attr "adjust_len" "ashrsi")
(set_attr "cc" "clobber,none,clobber,set_n,clobber,clobber,clobber")])
;; Optimize if a scratch register from LD_REGS happens to be available.
(define_peephole2
[(match_scratch:QI 3 "d")
(set (match_operand:ALL2 0 "register_operand" "")
(ashiftrt:ALL2 (match_operand:ALL2 1 "register_operand" "")
(match_operand:QI 2 "const_int_operand" "")))]
""
[(parallel [(set (match_dup 0)
(ashiftrt:ALL2 (match_dup 1)
(match_dup 2)))
(clobber (match_dup 3))])])
;; "*ashrhi3_const"
;; "*ashrhq3_const" "*ashruhq3_const"
;; "*ashrha3_const" "*ashruha3_const"
(define_insn "*ashr3_const"
[(set (match_operand:ALL2 0 "register_operand" "=r,r,r,r,r")
(ashiftrt:ALL2 (match_operand:ALL2 1 "register_operand" "0,0,r,0,0")
(match_operand:QI 2 "const_int_operand" "L,P,O,K,n")))
(clobber (match_scratch:QI 3 "=X,X,X,X,&d"))]
"reload_completed"
{
return ashrhi3_out (insn, operands, NULL);
}
[(set_attr "length" "0,2,4,4,10")
(set_attr "adjust_len" "ashrhi")
(set_attr "cc" "none,clobber,set_n,clobber,clobber")])
(define_peephole2
[(match_scratch:QI 3 "d")
(set (match_operand:ALL4 0 "register_operand" "")
(ashiftrt:ALL4 (match_operand:ALL4 1 "register_operand" "")
(match_operand:QI 2 "const_int_operand" "")))]
""
[(parallel [(set (match_dup 0)
(ashiftrt:ALL4 (match_dup 1)
(match_dup 2)))
(clobber (match_dup 3))])])
;; "*ashrsi3_const"
;; "*ashrsq3_const" "*ashrusq3_const"
;; "*ashrsa3_const" "*ashrusa3_const"
(define_insn "*ashr3_const"
[(set (match_operand:ALL4 0 "register_operand" "=r,r,r,r")
(ashiftrt:ALL4 (match_operand:ALL4 1 "register_operand" "0,0,r,0")
(match_operand:QI 2 "const_int_operand" "L,P,O,n")))
(clobber (match_scratch:QI 3 "=X,X,X,&d"))]
"reload_completed"
{
return ashrsi3_out (insn, operands, NULL);
}
[(set_attr "length" "0,4,4,10")
(set_attr "adjust_len" "ashrsi")
(set_attr "cc" "none,clobber,set_n,clobber")])
;; >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>
;; logical shift right
;; "lshrqi3"
;; "lshrqq3" "lshruqq3"
(define_expand "lshr3"
[(set (match_operand:ALL1 0 "register_operand" "")
(lshiftrt:ALL1 (match_operand:ALL1 1 "register_operand" "")
(match_operand:QI 2 "nop_general_operand" "")))])
(define_split ; lshrqi3_const4
[(set (match_operand:ALL1 0 "d_register_operand" "")
(lshiftrt:ALL1 (match_dup 0)
(const_int 4)))]
""
[(set (match_dup 1)
(rotate:QI (match_dup 1)
(const_int 4)))
(set (match_dup 1)
(and:QI (match_dup 1)
(const_int 15)))]
{
operands[1] = avr_to_int_mode (operands[0]);
})
(define_split ; lshrqi3_const5
[(set (match_operand:ALL1 0 "d_register_operand" "")
(lshiftrt:ALL1 (match_dup 0)
(const_int 5)))]
""
[(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4)))
(set (match_dup 1) (lshiftrt:QI (match_dup 1) (const_int 1)))
(set (match_dup 1) (and:QI (match_dup 1) (const_int 7)))]
{
operands[1] = avr_to_int_mode (operands[0]);
})
(define_split ; lshrqi3_const6
[(set (match_operand:QI 0 "d_register_operand" "")
(lshiftrt:QI (match_dup 0)
(const_int 6)))]
""
[(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4)))
(set (match_dup 1) (lshiftrt:QI (match_dup 1) (const_int 2)))
(set (match_dup 1) (and:QI (match_dup 1) (const_int 3)))]
{
operands[1] = avr_to_int_mode (operands[0]);
})
;; "*lshrqi3"
;; "*lshrqq3"
;; "*lshruqq3"
(define_insn "*lshr3"
[(set (match_operand:ALL1 0 "register_operand" "=r,r,r,r,!d,r,r")
(lshiftrt:ALL1 (match_operand:ALL1 1 "register_operand" "0,0,0,0,0 ,0,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,K,n ,n,Qm")))]
""
{
return lshrqi3_out (insn, operands, NULL);
}
[(set_attr "length" "5,0,1,2,4,6,9")
(set_attr "adjust_len" "lshrqi")
(set_attr "cc" "clobber,none,set_czn,set_czn,set_czn,set_czn,clobber")])
;; "lshrhi3"
;; "lshrhq3" "lshruhq3"
;; "lshrha3" "lshruha3"
(define_insn "lshr3"
[(set (match_operand:ALL2 0 "register_operand" "=r,r,r,r,r,r,r")
(lshiftrt:ALL2 (match_operand:ALL2 1 "register_operand" "0,0,0,r,0,0,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,O,K,n,Qm")))]
""
{
return lshrhi3_out (insn, operands, NULL);
}
[(set_attr "length" "6,0,2,2,4,10,10")
(set_attr "adjust_len" "lshrhi")
(set_attr "cc" "clobber,none,clobber,clobber,clobber,clobber,clobber")])
(define_insn "lshrpsi3"
[(set (match_operand:PSI 0 "register_operand" "=r,r,r,r,r")
(lshiftrt:PSI (match_operand:PSI 1 "register_operand" "0,0,r,0,0")
(match_operand:QI 2 "nonmemory_operand" "r,P,O,K,n")))
(clobber (match_scratch:QI 3 "=X,X,X,X,&d"))]
""
{
return avr_out_lshrpsi3 (insn, operands, NULL);
}
[(set_attr "adjust_len" "lshrpsi")
(set_attr "cc" "clobber")])
;; "lshrsi3"
;; "lshrsq3" "lshrusq3"
;; "lshrsa3" "lshrusa3"
(define_insn "lshr3"
[(set (match_operand:ALL4 0 "register_operand" "=r,r,r,r,r,r,r")
(lshiftrt:ALL4 (match_operand:ALL4 1 "register_operand" "0,0,0,r,0,0,0")
(match_operand:QI 2 "nop_general_operand" "r,L,P,O,K,n,Qm")))]
""
{
return lshrsi3_out (insn, operands, NULL);
}
[(set_attr "length" "8,0,4,4,8,10,12")
(set_attr "adjust_len" "lshrsi")
(set_attr "cc" "clobber,none,clobber,clobber,clobber,clobber,clobber")])
;; Optimize if a scratch register from LD_REGS happens to be available.
(define_peephole2 ; lshrqi3_l_const4
[(set (match_operand:ALL1 0 "l_register_operand" "")
(lshiftrt:ALL1 (match_dup 0)
(const_int 4)))
(match_scratch:QI 1 "d")]
""
[(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4)))
(set (match_dup 1) (const_int 15))
(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1)))]
{
operands[2] = avr_to_int_mode (operands[0]);
})
(define_peephole2 ; lshrqi3_l_const5
[(set (match_operand:ALL1 0 "l_register_operand" "")
(lshiftrt:ALL1 (match_dup 0)
(const_int 5)))
(match_scratch:QI 1 "d")]
""
[(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4)))
(set (match_dup 2) (lshiftrt:QI (match_dup 2) (const_int 1)))
(set (match_dup 1) (const_int 7))
(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1)))]
{
operands[2] = avr_to_int_mode (operands[0]);
})
(define_peephole2 ; lshrqi3_l_const6
[(set (match_operand:ALL1 0 "l_register_operand" "")
(lshiftrt:ALL1 (match_dup 0)
(const_int 6)))
(match_scratch:QI 1 "d")]
""
[(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4)))
(set (match_dup 2) (lshiftrt:QI (match_dup 2) (const_int 2)))
(set (match_dup 1) (const_int 3))
(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1)))]
{
operands[2] = avr_to_int_mode (operands[0]);
})
(define_peephole2
[(match_scratch:QI 3 "d")
(set (match_operand:ALL2 0 "register_operand" "")
(lshiftrt:ALL2 (match_operand:ALL2 1 "register_operand" "")
(match_operand:QI 2 "const_int_operand" "")))]
""
[(parallel [(set (match_dup 0)
(lshiftrt:ALL2 (match_dup 1)
(match_dup 2)))
(clobber (match_dup 3))])])
;; "*lshrhi3_const"
;; "*lshrhq3_const" "*lshruhq3_const"
;; "*lshrha3_const" "*lshruha3_const"
(define_insn "*lshr3_const"
[(set (match_operand:ALL2 0 "register_operand" "=r,r,r,r,r")
(lshiftrt:ALL2 (match_operand:ALL2 1 "register_operand" "0,0,r,0,0")
(match_operand:QI 2 "const_int_operand" "L,P,O,K,n")))
(clobber (match_scratch:QI 3 "=X,X,X,X,&d"))]
"reload_completed"
{
return lshrhi3_out (insn, operands, NULL);
}
[(set_attr "length" "0,2,2,4,10")
(set_attr "adjust_len" "lshrhi")
(set_attr "cc" "none,clobber,clobber,clobber,clobber")])
(define_peephole2
[(match_scratch:QI 3 "d")
(set (match_operand:ALL4 0 "register_operand" "")
(lshiftrt:ALL4 (match_operand:ALL4 1 "register_operand" "")
(match_operand:QI 2 "const_int_operand" "")))]
""
[(parallel [(set (match_dup 0)
(lshiftrt:ALL4 (match_dup 1)
(match_dup 2)))
(clobber (match_dup 3))])])
;; "*lshrsi3_const"
;; "*lshrsq3_const" "*lshrusq3_const"
;; "*lshrsa3_const" "*lshrusa3_const"
(define_insn "*lshr3_const"
[(set (match_operand:ALL4 0 "register_operand" "=r,r,r,r")
(lshiftrt:ALL4 (match_operand:ALL4 1 "register_operand" "0,0,r,0")
(match_operand:QI 2 "const_int_operand" "L,P,O,n")))
(clobber (match_scratch:QI 3 "=X,X,X,&d"))]
"reload_completed"
{
return lshrsi3_out (insn, operands, NULL);
}
[(set_attr "length" "0,4,4,10")
(set_attr "adjust_len" "lshrsi")
(set_attr "cc" "none,clobber,clobber,clobber")])
;; abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x)
;; abs
(define_insn "absqi2"
[(set (match_operand:QI 0 "register_operand" "=r")
(abs:QI (match_operand:QI 1 "register_operand" "0")))]
""
"sbrc %0,7
neg %0"
[(set_attr "length" "2")
(set_attr "cc" "clobber")])
(define_insn "abssf2"
[(set (match_operand:SF 0 "register_operand" "=d,r")
(abs:SF (match_operand:SF 1 "register_operand" "0,0")))]
""
"@
andi %D0,0x7f
clt\;bld %D0,7"
[(set_attr "length" "1,2")
(set_attr "cc" "set_n,clobber")])
;; 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x
;; neg
(define_insn "negqi2"
[(set (match_operand:QI 0 "register_operand" "=r")
(neg:QI (match_operand:QI 1 "register_operand" "0")))]
""
"neg %0"
[(set_attr "length" "1")
(set_attr "cc" "set_vzn")])
(define_insn "*negqihi2"
[(set (match_operand:HI 0 "register_operand" "=r")
(neg:HI (sign_extend:HI (match_operand:QI 1 "register_operand" "0"))))]
""
"clr %B0\;neg %A0\;brge .+2\;com %B0"
[(set_attr "length" "4")
(set_attr "cc" "set_n")])
(define_insn "neghi2"
[(set (match_operand:HI 0 "register_operand" "=r,&r")
(neg:HI (match_operand:HI 1 "register_operand" "0,r")))]
""
"@
neg %B0\;neg %A0\;sbc %B0,__zero_reg__
clr %A0\;clr %B0\;sub %A0,%A1\;sbc %B0,%B1"
[(set_attr "length" "3,4")
(set_attr "cc" "set_czn")])
(define_insn "negpsi2"
[(set (match_operand:PSI 0 "register_operand" "=!d,r,&r")
(neg:PSI (match_operand:PSI 1 "register_operand" "0,0,r")))]
""
"@
com %C0\;com %B0\;neg %A0\;sbci %B0,-1\;sbci %C0,-1
com %C0\;com %B0\;com %A0\;adc %A0,__zero_reg__\;adc %B0,__zero_reg__\;adc %C0,__zero_reg__
clr %A0\;clr %B0\;clr %C0\;sub %A0,%A1\;sbc %B0,%B1\;sbc %C0,%C1"
[(set_attr "length" "5,6,6")
(set_attr "cc" "set_czn,set_n,set_czn")])
(define_insn "negsi2"
[(set (match_operand:SI 0 "register_operand" "=!d,r,&r,&r")
(neg:SI (match_operand:SI 1 "register_operand" "0,0,r ,r")))]
""
"@
com %D0\;com %C0\;com %B0\;neg %A0\;sbci %B0,lo8(-1)\;sbci %C0,lo8(-1)\;sbci %D0,lo8(-1)
com %D0\;com %C0\;com %B0\;com %A0\;adc %A0,__zero_reg__\;adc %B0,__zero_reg__\;adc %C0,__zero_reg__\;adc %D0,__zero_reg__
clr %A0\;clr %B0\;clr %C0\;clr %D0\;sub %A0,%A1\;sbc %B0,%B1\;sbc %C0,%C1\;sbc %D0,%D1
clr %A0\;clr %B0\;movw %C0,%A0\;sub %A0,%A1\;sbc %B0,%B1\;sbc %C0,%C1\;sbc %D0,%D1"
[(set_attr "length" "7,8,8,7")
(set_attr "isa" "*,*,mov,movw")
(set_attr "cc" "set_czn,set_n,set_czn,set_czn")])
(define_insn "negsf2"
[(set (match_operand:SF 0 "register_operand" "=d,r")
(neg:SF (match_operand:SF 1 "register_operand" "0,0")))]
""
"@
subi %D0,0x80
bst %D0,7\;com %D0\;bld %D0,7\;com %D0"
[(set_attr "length" "1,4")
(set_attr "cc" "set_n,set_n")])
;; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
;; not
(define_insn "one_cmplqi2"
[(set (match_operand:QI 0 "register_operand" "=r")
(not:QI (match_operand:QI 1 "register_operand" "0")))]
""
"com %0"
[(set_attr "length" "1")
(set_attr "cc" "set_czn")])
(define_insn "one_cmplhi2"
[(set (match_operand:HI 0 "register_operand" "=r")
(not:HI (match_operand:HI 1 "register_operand" "0")))]
""
"com %0
com %B0"
[(set_attr "length" "2")
(set_attr "cc" "set_n")])
(define_insn "one_cmplpsi2"
[(set (match_operand:PSI 0 "register_operand" "=r")
(not:PSI (match_operand:PSI 1 "register_operand" "0")))]
""
"com %0\;com %B0\;com %C0"
[(set_attr "length" "3")
(set_attr "cc" "set_n")])
(define_insn "one_cmplsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(not:SI (match_operand:SI 1 "register_operand" "0")))]
""
"com %0
com %B0
com %C0
com %D0"
[(set_attr "length" "4")
(set_attr "cc" "set_n")])
;; xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x
;; sign extend
;; We keep combiner from inserting hard registers into the input of sign- and
;; zero-extends. A hard register in the input operand is not wanted because
;; 32-bit multiply patterns clobber some hard registers and extends with a
;; hard register that overlaps these clobbers won't be combined to a widening
;; multiplication. There is no need for combine to propagate hard registers,
;; register allocation can do it just as well.
(define_insn "extendqihi2"
[(set (match_operand:HI 0 "register_operand" "=r,r")
(sign_extend:HI (match_operand:QI 1 "combine_pseudo_register_operand" "0,*r")))]
""
{
return avr_out_sign_extend (insn, operands, NULL);
}
[(set_attr "length" "3,4")
(set_attr "adjust_len" "sext")
(set_attr "cc" "set_n")])
(define_insn "extendqipsi2"
[(set (match_operand:PSI 0 "register_operand" "=r,r")
(sign_extend:PSI (match_operand:QI 1 "combine_pseudo_register_operand" "0,*r")))]
""
{
return avr_out_sign_extend (insn, operands, NULL);
}
[(set_attr "length" "4,5")
(set_attr "adjust_len" "sext")
(set_attr "cc" "set_n")])
(define_insn "extendqisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(sign_extend:SI (match_operand:QI 1 "combine_pseudo_register_operand" "0,*r")))]
""
{
return avr_out_sign_extend (insn, operands, NULL);
}
[(set_attr "length" "5,6")
(set_attr "adjust_len" "sext")
(set_attr "cc" "set_n")])
(define_insn "extendhipsi2"
[(set (match_operand:PSI 0 "register_operand" "=r,r")
(sign_extend:PSI (match_operand:HI 1 "combine_pseudo_register_operand" "0,*r")))]
""
{
return avr_out_sign_extend (insn, operands, NULL);
}
[(set_attr "length" "3,5")
(set_attr "adjust_len" "sext")
(set_attr "cc" "set_n")])
(define_insn "extendhisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(sign_extend:SI (match_operand:HI 1 "combine_pseudo_register_operand" "0,*r")))]
""
{
return avr_out_sign_extend (insn, operands, NULL);
}
[(set_attr "length" "4,6")
(set_attr "adjust_len" "sext")
(set_attr "cc" "set_n")])
(define_insn "extendpsisi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(sign_extend:SI (match_operand:PSI 1 "combine_pseudo_register_operand" "0")))]
""
{
return avr_out_sign_extend (insn, operands, NULL);
}
[(set_attr "length" "3")
(set_attr "adjust_len" "sext")
(set_attr "cc" "set_n")])
;; xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x
;; zero extend
(define_insn_and_split "zero_extendqihi2"
[(set (match_operand:HI 0 "register_operand" "=r")
(zero_extend:HI (match_operand:QI 1 "combine_pseudo_register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (match_dup 1))
(set (match_dup 3) (const_int 0))]
{
unsigned int low_off = subreg_lowpart_offset (QImode, HImode);
unsigned int high_off = subreg_highpart_offset (QImode, HImode);
operands[2] = simplify_gen_subreg (QImode, operands[0], HImode, low_off);
operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, high_off);
})
(define_insn_and_split "zero_extendqipsi2"
[(set (match_operand:PSI 0 "register_operand" "=r")
(zero_extend:PSI (match_operand:QI 1 "combine_pseudo_register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (match_dup 1))
(set (match_dup 3) (const_int 0))
(set (match_dup 4) (const_int 0))]
{
operands[2] = simplify_gen_subreg (QImode, operands[0], PSImode, 0);
operands[3] = simplify_gen_subreg (QImode, operands[0], PSImode, 1);
operands[4] = simplify_gen_subreg (QImode, operands[0], PSImode, 2);
})
(define_insn_and_split "zero_extendqisi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI (match_operand:QI 1 "combine_pseudo_register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (zero_extend:HI (match_dup 1)))
(set (match_dup 3) (const_int 0))]
{
unsigned int low_off = subreg_lowpart_offset (HImode, SImode);
unsigned int high_off = subreg_highpart_offset (HImode, SImode);
operands[2] = simplify_gen_subreg (HImode, operands[0], SImode, low_off);
operands[3] = simplify_gen_subreg (HImode, operands[0], SImode, high_off);
})
(define_insn_and_split "zero_extendhipsi2"
[(set (match_operand:PSI 0 "register_operand" "=r")
(zero_extend:PSI (match_operand:HI 1 "combine_pseudo_register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (match_dup 1))
(set (match_dup 3) (const_int 0))]
{
operands[2] = simplify_gen_subreg (HImode, operands[0], PSImode, 0);
operands[3] = simplify_gen_subreg (QImode, operands[0], PSImode, 2);
})
(define_insn_and_split "n_extendhipsi2"
[(set (match_operand:PSI 0 "register_operand" "=r,r,d,r")
(lo_sum:PSI (match_operand:QI 1 "const_int_operand" "L,P,n,n")
(match_operand:HI 2 "register_operand" "r,r,r,r")))
(clobber (match_scratch:QI 3 "=X,X,X,&d"))]
""
"#"
"reload_completed"
[(set (match_dup 4) (match_dup 2))
(set (match_dup 3) (match_dup 6))
; no-op move in the case where no scratch is needed
(set (match_dup 5) (match_dup 3))]
{
operands[4] = simplify_gen_subreg (HImode, operands[0], PSImode, 0);
operands[5] = simplify_gen_subreg (QImode, operands[0], PSImode, 2);
operands[6] = operands[1];
if (GET_CODE (operands[3]) == SCRATCH)
operands[3] = operands[5];
})
(define_insn_and_split "zero_extendhisi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI (match_operand:HI 1 "combine_pseudo_register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (match_dup 1))
(set (match_dup 3) (const_int 0))]
{
unsigned int low_off = subreg_lowpart_offset (HImode, SImode);
unsigned int high_off = subreg_highpart_offset (HImode, SImode);
operands[2] = simplify_gen_subreg (HImode, operands[0], SImode, low_off);
operands[3] = simplify_gen_subreg (HImode, operands[0], SImode, high_off);
})
(define_insn_and_split "zero_extendpsisi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI (match_operand:PSI 1 "combine_pseudo_register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (match_dup 1))
(set (match_dup 3) (const_int 0))]
{
operands[2] = simplify_gen_subreg (PSImode, operands[0], SImode, 0);
operands[3] = simplify_gen_subreg (QImode, operands[0], SImode, 3);
})
(define_insn_and_split "zero_extendqidi2"
[(set (match_operand:DI 0 "register_operand" "=r")
(zero_extend:DI (match_operand:QI 1 "register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (zero_extend:SI (match_dup 1)))
(set (match_dup 3) (const_int 0))]
{
unsigned int low_off = subreg_lowpart_offset (SImode, DImode);
unsigned int high_off = subreg_highpart_offset (SImode, DImode);
operands[2] = simplify_gen_subreg (SImode, operands[0], DImode, low_off);
operands[3] = simplify_gen_subreg (SImode, operands[0], DImode, high_off);
})
(define_insn_and_split "zero_extendhidi2"
[(set (match_operand:DI 0 "register_operand" "=r")
(zero_extend:DI (match_operand:HI 1 "register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (zero_extend:SI (match_dup 1)))
(set (match_dup 3) (const_int 0))]
{
unsigned int low_off = subreg_lowpart_offset (SImode, DImode);
unsigned int high_off = subreg_highpart_offset (SImode, DImode);
operands[2] = simplify_gen_subreg (SImode, operands[0], DImode, low_off);
operands[3] = simplify_gen_subreg (SImode, operands[0], DImode, high_off);
})
(define_insn_and_split "zero_extendsidi2"
[(set (match_operand:DI 0 "register_operand" "=r")
(zero_extend:DI (match_operand:SI 1 "register_operand" "r")))]
""
"#"
"reload_completed"
[(set (match_dup 2) (match_dup 1))
(set (match_dup 3) (const_int 0))]
{
unsigned int low_off = subreg_lowpart_offset (SImode, DImode);
unsigned int high_off = subreg_highpart_offset (SImode, DImode);
operands[2] = simplify_gen_subreg (SImode, operands[0], DImode, low_off);
operands[3] = simplify_gen_subreg (SImode, operands[0], DImode, high_off);
})
;;<=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=>
;; compare
; Optimize negated tests into reverse compare if overflow is undefined.
(define_insn "*negated_tstqi"
[(set (cc0)
(compare (neg:QI (match_operand:QI 0 "register_operand" "r"))
(const_int 0)))]
"!flag_wrapv && !flag_trapv && flag_strict_overflow"
"cp __zero_reg__,%0"
[(set_attr "cc" "compare")
(set_attr "length" "1")])
(define_insn "*reversed_tstqi"
[(set (cc0)
(compare (const_int 0)
(match_operand:QI 0 "register_operand" "r")))]
""
"cp __zero_reg__,%0"
[(set_attr "cc" "compare")
(set_attr "length" "2")])
(define_insn "*negated_tsthi"
[(set (cc0)
(compare (neg:HI (match_operand:HI 0 "register_operand" "r"))
(const_int 0)))]
"!flag_wrapv && !flag_trapv && flag_strict_overflow"
"cp __zero_reg__,%A0
cpc __zero_reg__,%B0"
[(set_attr "cc" "compare")
(set_attr "length" "2")])
;; Leave here the clobber used by the cmphi pattern for simplicity, even
;; though it is unused, because this pattern is synthesized by avr_reorg.
(define_insn "*reversed_tsthi"
[(set (cc0)
(compare (const_int 0)
(match_operand:HI 0 "register_operand" "r")))
(clobber (match_scratch:QI 1 "=X"))]
""
"cp __zero_reg__,%A0
cpc __zero_reg__,%B0"
[(set_attr "cc" "compare")
(set_attr "length" "2")])
(define_insn "*negated_tstpsi"
[(set (cc0)
(compare (neg:PSI (match_operand:PSI 0 "register_operand" "r"))
(const_int 0)))]
"!flag_wrapv && !flag_trapv && flag_strict_overflow"
"cp __zero_reg__,%A0\;cpc __zero_reg__,%B0\;cpc __zero_reg__,%C0"
[(set_attr "cc" "compare")
(set_attr "length" "3")])
(define_insn "*reversed_tstpsi"
[(set (cc0)
(compare (const_int 0)
(match_operand:PSI 0 "register_operand" "r")))
(clobber (match_scratch:QI 1 "=X"))]
""
"cp __zero_reg__,%A0\;cpc __zero_reg__,%B0\;cpc __zero_reg__,%C0"
[(set_attr "cc" "compare")
(set_attr "length" "3")])
(define_insn "*negated_tstsi"
[(set (cc0)
(compare (neg:SI (match_operand:SI 0 "register_operand" "r"))
(const_int 0)))]
"!flag_wrapv && !flag_trapv && flag_strict_overflow"
"cp __zero_reg__,%A0
cpc __zero_reg__,%B0
cpc __zero_reg__,%C0
cpc __zero_reg__,%D0"
[(set_attr "cc" "compare")
(set_attr "length" "4")])
;; "*reversed_tstsi"
;; "*reversed_tstsq" "*reversed_tstusq"
;; "*reversed_tstsa" "*reversed_tstusa"
(define_insn "*reversed_tst"
[(set (cc0)
(compare (match_operand:ALL4 0 "const0_operand" "Y00")
(match_operand:ALL4 1 "register_operand" "r")))
(clobber (match_scratch:QI 2 "=X"))]
""
"cp __zero_reg__,%A1
cpc __zero_reg__,%B1
cpc __zero_reg__,%C1
cpc __zero_reg__,%D1"
[(set_attr "cc" "compare")
(set_attr "length" "4")])
;; "cmpqi3"
;; "cmpqq3" "cmpuqq3"
(define_insn "cmp3"
[(set (cc0)
(compare (match_operand:ALL1 0 "register_operand" "r ,r,d")
(match_operand:ALL1 1 "nonmemory_operand" "Y00,r,i")))]
""
"@
tst %0
cp %0,%1
cpi %0,lo8(%1)"
[(set_attr "cc" "compare,compare,compare")
(set_attr "length" "1,1,1")])
(define_insn "*cmpqi_sign_extend"
[(set (cc0)
(compare (sign_extend:HI (match_operand:QI 0 "register_operand" "d"))
(match_operand:HI 1 "s8_operand" "n")))]
""
"cpi %0,lo8(%1)"
[(set_attr "cc" "compare")
(set_attr "length" "1")])
(define_insn "*cmphi.zero-extend.0"
[(set (cc0)
(compare (zero_extend:HI (match_operand:QI 0 "register_operand" "r"))
(match_operand:HI 1 "register_operand" "r")))]
""
"cp %0,%A1\;cpc __zero_reg__,%B1"
[(set_attr "cc" "compare")
(set_attr "length" "2")])
(define_insn "*cmphi.zero-extend.1"
[(set (cc0)
(compare (match_operand:HI 0 "register_operand" "r")
(zero_extend:HI (match_operand:QI 1 "register_operand" "r"))))]
""
"cp %A0,%1\;cpc %B0,__zero_reg__"
[(set_attr "cc" "compare")
(set_attr "length" "2")])
;; "cmphi3"
;; "cmphq3" "cmpuhq3"
;; "cmpha3" "cmpuha3"
(define_insn "cmp3"
[(set (cc0)
(compare (match_operand:ALL2 0 "register_operand" "!w ,r ,r,d ,r ,d,r")
(match_operand:ALL2 1 "nonmemory_operand" "Y00,Y00,r,s ,s ,M,n Ynn")))
(clobber (match_scratch:QI 2 "=X ,X ,X,&d,&d ,X,&d"))]
""
{
switch (which_alternative)
{
case 0:
case 1:
return avr_out_tsthi (insn, operands, NULL);
case 2:
return "cp %A0,%A1\;cpc %B0,%B1";
case 3:
if (mode != HImode)
break;
return reg_unused_after (insn, operands[0])
? "subi %A0,lo8(%1)\;sbci %B0,hi8(%1)"
: "ldi %2,hi8(%1)\;cpi %A0,lo8(%1)\;cpc %B0,%2";
case 4:
if (mode != HImode)
break;
return "ldi %2,lo8(%1)\;cp %A0,%2\;ldi %2,hi8(%1)\;cpc %B0,%2";
}
return avr_out_compare (insn, operands, NULL);
}
[(set_attr "cc" "compare")
(set_attr "length" "1,2,2,3,4,2,4")
(set_attr "adjust_len" "tsthi,tsthi,*,*,*,compare,compare")])
(define_insn "*cmppsi"
[(set (cc0)
(compare (match_operand:PSI 0 "register_operand" "r,r,d ,r ,d,r")
(match_operand:PSI 1 "nonmemory_operand" "L,r,s ,s ,M,n")))
(clobber (match_scratch:QI 2 "=X,X,&d,&d ,X,&d"))]
""
{
switch (which_alternative)
{
case 0:
return avr_out_tstpsi (insn, operands, NULL);
case 1:
return "cp %A0,%A1\;cpc %B0,%B1\;cpc %C0,%C1";
case 2:
return reg_unused_after (insn, operands[0])
? "subi %A0,lo8(%1)\;sbci %B0,hi8(%1)\;sbci %C0,hh8(%1)"
: "cpi %A0,lo8(%1)\;ldi %2,hi8(%1)\;cpc %B0,%2\;ldi %2,hh8(%1)\;cpc %C0,%2";
case 3:
return "ldi %2,lo8(%1)\;cp %A0,%2\;ldi %2,hi8(%1)\;cpc %B0,%2\;ldi %2,hh8(%1)\;cpc %C0,%2";
}
return avr_out_compare (insn, operands, NULL);
}
[(set_attr "cc" "compare")
(set_attr "length" "3,3,5,6,3,7")
(set_attr "adjust_len" "tstpsi,*,*,*,compare,compare")])
;; "*cmpsi"
;; "*cmpsq" "*cmpusq"
;; "*cmpsa" "*cmpusa"
(define_insn "*cmp"
[(set (cc0)
(compare (match_operand:ALL4 0 "register_operand" "r ,r ,d,r ,r")
(match_operand:ALL4 1 "nonmemory_operand" "Y00,r ,M,M ,n Ynn")))
(clobber (match_scratch:QI 2 "=X ,X ,X,&d,&d"))]
""
{
if (0 == which_alternative)
return avr_out_tstsi (insn, operands, NULL);
else if (1 == which_alternative)
return "cp %A0,%A1\;cpc %B0,%B1\;cpc %C0,%C1\;cpc %D0,%D1";
return avr_out_compare (insn, operands, NULL);
}
[(set_attr "cc" "compare")
(set_attr "length" "4,4,4,5,8")
(set_attr "adjust_len" "tstsi,*,compare,compare,compare")])
;; ----------------------------------------------------------------------
;; JUMP INSTRUCTIONS
;; ----------------------------------------------------------------------
;; Conditional jump instructions
;; "cbranchqi4"
;; "cbranchqq4" "cbranchuqq4"
(define_expand "cbranch4"
[(set (cc0)
(compare (match_operand:ALL1 1 "register_operand" "")
(match_operand:ALL1 2 "nonmemory_operand" "")))
(set (pc)
(if_then_else
(match_operator 0 "ordered_comparison_operator" [(cc0)
(const_int 0)])
(label_ref (match_operand 3 "" ""))
(pc)))])
;; "cbranchhi4" "cbranchhq4" "cbranchuhq4" "cbranchha4" "cbranchuha4"
;; "cbranchsi4" "cbranchsq4" "cbranchusq4" "cbranchsa4" "cbranchusa4"
;; "cbranchpsi4"
(define_expand "cbranch4"
[(parallel [(set (cc0)
(compare (match_operand:ORDERED234 1 "register_operand" "")
(match_operand:ORDERED234 2 "nonmemory_operand" "")))
(clobber (match_scratch:QI 4 ""))])
(set (pc)
(if_then_else
(match_operator 0 "ordered_comparison_operator" [(cc0)
(const_int 0)])
(label_ref (match_operand 3 "" ""))
(pc)))])
;; Test a single bit in a QI/HI/SImode register.
;; Combine will create zero extract patterns for single bit tests.
;; permit any mode in source pattern by using VOIDmode.
(define_insn "*sbrx_branch"
[(set (pc)
(if_then_else
(match_operator 0 "eqne_operator"
[(zero_extract:QIDI
(match_operand:VOID 1 "register_operand" "r")
(const_int 1)
(match_operand 2 "const_int_operand" "n"))
(const_int 0)])
(label_ref (match_operand 3 "" ""))
(pc)))]
""
{
return avr_out_sbxx_branch (insn, operands);
}
[(set (attr "length")
(if_then_else (and (ge (minus (pc) (match_dup 3)) (const_int -2046))
(le (minus (pc) (match_dup 3)) (const_int 2046)))
(const_int 2)
(if_then_else (match_test "!AVR_HAVE_JMP_CALL")
(const_int 2)
(const_int 4))))
(set_attr "cc" "clobber")])
;; Same test based on bitwise AND. Keep this in case gcc changes patterns.
;; or for old peepholes.
;; Fixme - bitwise Mask will not work for DImode
(define_insn "*sbrx_and_branch"
[(set (pc)
(if_then_else
(match_operator 0 "eqne_operator"
[(and:QISI
(match_operand:QISI 1 "register_operand" "r")
(match_operand:QISI 2 "single_one_operand" "n"))
(const_int 0)])
(label_ref (match_operand 3 "" ""))
(pc)))]
""
{
HOST_WIDE_INT bitnumber;
bitnumber = exact_log2 (GET_MODE_MASK (mode) & INTVAL (operands[2]));
operands[2] = GEN_INT (bitnumber);
return avr_out_sbxx_branch (insn, operands);
}
[(set (attr "length")
(if_then_else (and (ge (minus (pc) (match_dup 3)) (const_int -2046))
(le (minus (pc) (match_dup 3)) (const_int 2046)))
(const_int 2)
(if_then_else (match_test "!AVR_HAVE_JMP_CALL")
(const_int 2)
(const_int 4))))
(set_attr "cc" "clobber")])
;; Convert sign tests to bit 7/15/31 tests that match the above insns.
(define_peephole2
[(set (cc0) (compare (match_operand:QI 0 "register_operand" "")
(const_int 0)))
(set (pc) (if_then_else (ge (cc0) (const_int 0))
(label_ref (match_operand 1 "" ""))
(pc)))]
""
[(set (pc) (if_then_else (eq (zero_extract:HI (match_dup 0)
(const_int 1)
(const_int 7))
(const_int 0))
(label_ref (match_dup 1))
(pc)))])
(define_peephole2
[(set (cc0) (compare (match_operand:QI 0 "register_operand" "")
(const_int 0)))
(set (pc) (if_then_else (lt (cc0) (const_int 0))
(label_ref (match_operand 1 "" ""))
(pc)))]
""
[(set (pc) (if_then_else (ne (zero_extract:HI (match_dup 0)
(const_int 1)
(const_int 7))
(const_int 0))
(label_ref (match_dup 1))
(pc)))])
(define_peephole2
[(parallel [(set (cc0) (compare (match_operand:HI 0 "register_operand" "")
(const_int 0)))
(clobber (match_operand:HI 2 ""))])
(set (pc) (if_then_else (ge (cc0) (const_int 0))
(label_ref (match_operand 1 "" ""))
(pc)))]
""
[(set (pc) (if_then_else (eq (and:HI (match_dup 0) (const_int -32768))
(const_int 0))
(label_ref (match_dup 1))
(pc)))])
(define_peephole2
[(parallel [(set (cc0) (compare (match_operand:HI 0 "register_operand" "")
(const_int 0)))
(clobber (match_operand:HI 2 ""))])
(set (pc) (if_then_else (lt (cc0) (const_int 0))
(label_ref (match_operand 1 "" ""))
(pc)))]
""
[(set (pc) (if_then_else (ne (and:HI (match_dup 0) (const_int -32768))
(const_int 0))
(label_ref (match_dup 1))
(pc)))])
(define_peephole2
[(parallel [(set (cc0) (compare (match_operand:SI 0 "register_operand" "")
(const_int 0)))
(clobber (match_operand:SI 2 ""))])
(set (pc) (if_then_else (ge (cc0) (const_int 0))
(label_ref (match_operand 1 "" ""))
(pc)))]
""
[(set (pc) (if_then_else (eq (and:SI (match_dup 0) (match_dup 2))
(const_int 0))
(label_ref (match_dup 1))
(pc)))]
"operands[2] = gen_int_mode (-2147483647 - 1, SImode);")
(define_peephole2
[(parallel [(set (cc0) (compare (match_operand:SI 0 "register_operand" "")
(const_int 0)))
(clobber (match_operand:SI 2 ""))])
(set (pc) (if_then_else (lt (cc0) (const_int 0))
(label_ref (match_operand 1 "" ""))
(pc)))]
""
[(set (pc) (if_then_else (ne (and:SI (match_dup 0) (match_dup 2))
(const_int 0))
(label_ref (match_dup 1))
(pc)))]
"operands[2] = gen_int_mode (-2147483647 - 1, SImode);")
;; ************************************************************************
;; Implementation of conditional jumps here.
;; Compare with 0 (test) jumps
;; ************************************************************************
(define_insn "branch"
[(set (pc)
(if_then_else (match_operator 1 "simple_comparison_operator"
[(cc0)
(const_int 0)])
(label_ref (match_operand 0 "" ""))
(pc)))]
""
{
return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 0);
}
[(set_attr "type" "branch")
(set_attr "cc" "clobber")])
;; Same as above but wrap SET_SRC so that this branch won't be transformed
;; or optimized in the remainder.
(define_insn "branch_unspec"
[(set (pc)
(unspec [(if_then_else (match_operator 1 "simple_comparison_operator"
[(cc0)
(const_int 0)])
(label_ref (match_operand 0 "" ""))
(pc))
] UNSPEC_IDENTITY))]
""
{
return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 0);
}
[(set_attr "type" "branch")
(set_attr "cc" "none")])
;; ****************************************************************
;; AVR does not have following conditional jumps: LE,LEU,GT,GTU.
;; Convert them all to proper jumps.
;; ****************************************************************/
(define_insn "difficult_branch"
[(set (pc)
(if_then_else (match_operator 1 "difficult_comparison_operator"
[(cc0)
(const_int 0)])
(label_ref (match_operand 0 "" ""))
(pc)))]
""
{
return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 0);
}
[(set_attr "type" "branch1")
(set_attr "cc" "clobber")])
;; revers branch
(define_insn "rvbranch"
[(set (pc)
(if_then_else (match_operator 1 "simple_comparison_operator"
[(cc0)
(const_int 0)])
(pc)
(label_ref (match_operand 0 "" ""))))]
""
{
return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 1);
}
[(set_attr "type" "branch1")
(set_attr "cc" "clobber")])
(define_insn "difficult_rvbranch"
[(set (pc)
(if_then_else (match_operator 1 "difficult_comparison_operator"
[(cc0)
(const_int 0)])
(pc)
(label_ref (match_operand 0 "" ""))))]
""
{
return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 1);
}
[(set_attr "type" "branch")
(set_attr "cc" "clobber")])
;; **************************************************************************
;; Unconditional and other jump instructions.
(define_insn "jump"
[(set (pc)
(label_ref (match_operand 0 "" "")))]
""
{
return AVR_HAVE_JMP_CALL && get_attr_length (insn) != 1
? "jmp %x0"
: "rjmp %x0";
}
[(set (attr "length")
(if_then_else (match_operand 0 "symbol_ref_operand" "")
(if_then_else (match_test "!AVR_HAVE_JMP_CALL")
(const_int 1)
(const_int 2))
(if_then_else (and (ge (minus (pc) (match_dup 0)) (const_int -2047))
(le (minus (pc) (match_dup 0)) (const_int 2047)))
(const_int 1)
(const_int 2))))
(set_attr "cc" "none")])
;; call
;; Operand 1 not used on the AVR.
;; Operand 2 is 1 for tail-call, 0 otherwise.
(define_expand "call"
[(parallel[(call (match_operand:HI 0 "call_insn_operand" "")
(match_operand:HI 1 "general_operand" ""))
(use (const_int 0))])])
;; Operand 1 not used on the AVR.
;; Operand 2 is 1 for tail-call, 0 otherwise.
(define_expand "sibcall"
[(parallel[(call (match_operand:HI 0 "call_insn_operand" "")
(match_operand:HI 1 "general_operand" ""))
(use (const_int 1))])])
;; call value
;; Operand 2 not used on the AVR.
;; Operand 3 is 1 for tail-call, 0 otherwise.
(define_expand "call_value"
[(parallel[(set (match_operand 0 "register_operand" "")
(call (match_operand:HI 1 "call_insn_operand" "")
(match_operand:HI 2 "general_operand" "")))
(use (const_int 0))])])
;; Operand 2 not used on the AVR.
;; Operand 3 is 1 for tail-call, 0 otherwise.
(define_expand "sibcall_value"
[(parallel[(set (match_operand 0 "register_operand" "")
(call (match_operand:HI 1 "call_insn_operand" "")
(match_operand:HI 2 "general_operand" "")))
(use (const_int 1))])])
(define_insn "call_insn"
[(parallel[(call (mem:HI (match_operand:HI 0 "nonmemory_operand" "z,s,z,s"))
(match_operand:HI 1 "general_operand" "X,X,X,X"))
(use (match_operand:HI 2 "const_int_operand" "L,L,P,P"))])]
;; Operand 1 not used on the AVR.
;; Operand 2 is 1 for tail-call, 0 otherwise.
""
"@
%!icall
%~call %x0
%!ijmp
%~jmp %x0"
[(set_attr "cc" "clobber")
(set_attr "length" "1,*,1,*")
(set_attr "adjust_len" "*,call,*,call")])
(define_insn "call_value_insn"
[(parallel[(set (match_operand 0 "register_operand" "=r,r,r,r")
(call (mem:HI (match_operand:HI 1 "nonmemory_operand" "z,s,z,s"))
(match_operand:HI 2 "general_operand" "X,X,X,X")))
(use (match_operand:HI 3 "const_int_operand" "L,L,P,P"))])]
;; Operand 2 not used on the AVR.
;; Operand 3 is 1 for tail-call, 0 otherwise.
""
"@
%!icall
%~call %x1
%!ijmp
%~jmp %x1"
[(set_attr "cc" "clobber")
(set_attr "length" "1,*,1,*")
(set_attr "adjust_len" "*,call,*,call")])
(define_insn "nop"
[(const_int 0)]
""
"nop"
[(set_attr "cc" "none")
(set_attr "length" "1")])
; indirect jump
(define_expand "indirect_jump"
[(set (pc)
(match_operand:HI 0 "nonmemory_operand" ""))]
""
{
if (!AVR_HAVE_JMP_CALL && !register_operand (operands[0], HImode))
{
operands[0] = copy_to_mode_reg (HImode, operands[0]);
}
})
; indirect jump
(define_insn "*indirect_jump"
[(set (pc)
(match_operand:HI 0 "nonmemory_operand" "i,i,!z,*r,z"))]
""
"@
rjmp %x0
jmp %x0
ijmp
push %A0\;push %B0\;ret
eijmp"
[(set_attr "length" "1,2,1,3,1")
(set_attr "isa" "rjmp,jmp,ijmp,ijmp,eijmp")
(set_attr "cc" "none")])
;; table jump
;; For entries in jump table see avr_output_addr_vec_elt.
;; Table made from
;; "rjmp .L" instructions for <= 8K devices
;; ".word gs(.L)" addresses for > 8K devices
(define_insn "*tablejump"
[(set (pc)
(unspec:HI [(match_operand:HI 0 "register_operand" "!z,*r,z")]
UNSPEC_INDEX_JMP))
(use (label_ref (match_operand 1 "" "")))
(clobber (match_dup 0))
(clobber (const_int 0))]
"!AVR_HAVE_EIJMP_EICALL"
"@
ijmp
push %A0\;push %B0\;ret
jmp __tablejump2__"
[(set_attr "length" "1,3,2")
(set_attr "isa" "rjmp,rjmp,jmp")
(set_attr "cc" "none,none,clobber")])
(define_insn "*tablejump.3byte-pc"
[(set (pc)
(unspec:HI [(reg:HI REG_Z)]
UNSPEC_INDEX_JMP))
(use (label_ref (match_operand 0 "" "")))
(clobber (reg:HI REG_Z))
(clobber (reg:QI 24))]
"AVR_HAVE_EIJMP_EICALL"
"clr r24\;subi r30,pm_lo8(-(%0))\;sbci r31,pm_hi8(-(%0))\;sbci r24,pm_hh8(-(%0))\;jmp __tablejump2__"
[(set_attr "length" "6")
(set_attr "isa" "eijmp")
(set_attr "cc" "clobber")])
;; FIXME: casesi comes up with an SImode switch value $0 which
;; is quite some overhead because most code would use HI or
;; even QI. We add an AVR specific pass .avr-casesi which
;; tries to recover from the superfluous extension to SImode.
;;
;; Using "tablejump" could be a way out, but this also does
;; not perform in a satisfying manner as the middle end will
;; already multiply the table index by 2. Note that this
;; multiplication is performed by libgcc's __tablejump2__.
;; The multiplication there, however, runs *after* the table
;; start (a byte address) has been added, not before it like
;; "tablejump" will do.
;;
;; The preferred solution would be to let the middle ends pass
;; down information on the index as an additional casesi operand.
;;
;; If this expander is changed, you'll likely have to go through
;; "casesi__sequence" (used to recog + extract casesi
;; sequences in pass .avr-casesi) and propagate all adjustments
;; also to that pattern and the code of the extra pass.
(define_expand "casesi"
[(parallel [(set (match_dup 5)
(plus:SI (match_operand:SI 0 "register_operand")
(match_operand:SI 1 "const_int_operand")))
(clobber (scratch:QI))])
(parallel [(set (cc0)
(compare (match_dup 5)
(match_operand:SI 2 "const_int_operand")))
(clobber (scratch:QI))])
(set (pc)
(if_then_else (gtu (cc0)
(const_int 0))
(label_ref (match_operand 4))
(pc)))
(set (match_dup 7)
(match_dup 6))
(parallel [(set (pc)
(unspec:HI [(match_dup 7)] UNSPEC_INDEX_JMP))
(use (label_ref (match_dup 3)))
(clobber (match_dup 7))
(clobber (match_dup 8))])]
""
{
operands[1] = simplify_unary_operation (NEG, SImode, operands[1], SImode);
operands[5] = gen_reg_rtx (SImode);
operands[6] = simplify_gen_subreg (HImode, operands[5], SImode, 0);
if (AVR_HAVE_EIJMP_EICALL)
{
operands[7] = gen_rtx_REG (HImode, REG_Z);
operands[8] = all_regs_rtx[24];
}
else
{
operands[6] = gen_rtx_PLUS (HImode, operands[6],
gen_rtx_LABEL_REF (VOIDmode, operands[3]));
operands[7] = gen_reg_rtx (HImode);
operands[8] = const0_rtx;
}
})
;; This insn is used only for easy operand extraction.
;; The elements must match an extension to SImode plus
;; a sequence generated by casesi above.
;; "casesi_qi_sequence"
;; "casesi_hi_sequence"
(define_insn "casesi__sequence"
[(set (match_operand:SI 0 "register_operand")
(match_operator:SI 9 "extend_operator"
[(match_operand:QIHI 10 "register_operand")]))
;; What follows is a matcher for code from casesi.
;; We keep the same operand numbering (except for $9 and $10
;; which don't appear in casesi).
(parallel [(set (match_operand:SI 5 "register_operand")
(plus:SI (match_dup 0)
(match_operand:SI 1 "const_int_operand")))
(clobber (scratch:QI))])
(parallel [(set (cc0)
(compare (match_dup 5)
(match_operand:SI 2 "const_int_operand")))
(clobber (scratch:QI))])
(set (pc)
(if_then_else (gtu (cc0)
(const_int 0))
(label_ref (match_operand 4))
(pc)))
(set (match_operand:HI 7 "register_operand")
(match_operand:HI 6))
(parallel [(set (pc)
(unspec:HI [(match_dup 7)] UNSPEC_INDEX_JMP))
(use (label_ref (match_operand 3)))
(clobber (match_dup 7))
(clobber (match_operand:QI 8))])]
"optimize
&& avr_casei_sequence_check_operands (operands)"
{ gcc_unreachable(); }
)
;; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
;; This instruction sets Z flag
(define_insn "sez"
[(set (cc0) (const_int 0))]
""
"sez"
[(set_attr "length" "1")
(set_attr "cc" "compare")])
;; Clear/set/test a single bit in I/O address space.
(define_insn "*cbi"
[(set (mem:QI (match_operand 0 "low_io_address_operand" "i"))
(and:QI (mem:QI (match_dup 0))
(match_operand:QI 1 "single_zero_operand" "n")))]
""
{
operands[2] = GEN_INT (exact_log2 (~INTVAL (operands[1]) & 0xff));
return "cbi %i0,%2";
}
[(set_attr "length" "1")
(set_attr "cc" "none")])
(define_insn "*sbi"
[(set (mem:QI (match_operand 0 "low_io_address_operand" "i"))
(ior:QI (mem:QI (match_dup 0))
(match_operand:QI 1 "single_one_operand" "n")))]
""
{
operands[2] = GEN_INT (exact_log2 (INTVAL (operands[1]) & 0xff));
return "sbi %i0,%2";
}
[(set_attr "length" "1")
(set_attr "cc" "none")])
;; Lower half of the I/O space - use sbic/sbis directly.
(define_insn "*sbix_branch"
[(set (pc)
(if_then_else
(match_operator 0 "eqne_operator"
[(zero_extract:QIHI
(mem:QI (match_operand 1 "low_io_address_operand" "i"))
(const_int 1)
(match_operand 2 "const_int_operand" "n"))
(const_int 0)])
(label_ref (match_operand 3 "" ""))
(pc)))]
""
{
return avr_out_sbxx_branch (insn, operands);
}
[(set (attr "length")
(if_then_else (and (ge (minus (pc) (match_dup 3)) (const_int -2046))
(le (minus (pc) (match_dup 3)) (const_int 2046)))
(const_int 2)
(if_then_else (match_test "!AVR_HAVE_JMP_CALL")
(const_int 2)
(const_int 4))))
(set_attr "cc" "clobber")])
;; Tests of bit 7 are pessimized to sign tests, so we need this too...
(define_insn "*sbix_branch_bit7"
[(set (pc)
(if_then_else
(match_operator 0 "gelt_operator"
[(mem:QI (match_operand 1 "low_io_address_operand" "i"))
(const_int 0)])
(label_ref (match_operand 2 "" ""))
(pc)))]
""
{
operands[3] = operands[2];
operands[2] = GEN_INT (7);
return avr_out_sbxx_branch (insn, operands);
}
[(set (attr "length")
(if_then_else (and (ge (minus (pc) (match_dup 2)) (const_int -2046))
(le (minus (pc) (match_dup 2)) (const_int 2046)))
(const_int 2)
(if_then_else (match_test "!AVR_HAVE_JMP_CALL")
(const_int 2)
(const_int 4))))
(set_attr "cc" "clobber")])
;; Upper half of the I/O space - read port to __tmp_reg__ and use sbrc/sbrs.
(define_insn "*sbix_branch_tmp"
[(set (pc)
(if_then_else
(match_operator 0 "eqne_operator"
[(zero_extract:QIHI
(mem:QI (match_operand 1 "high_io_address_operand" "n"))
(const_int 1)
(match_operand 2 "const_int_operand" "n"))
(const_int 0)])
(label_ref (match_operand 3 "" ""))
(pc)))]
""
{
return avr_out_sbxx_branch (insn, operands);
}
[(set (attr "length")
(if_then_else (and (ge (minus (pc) (match_dup 3)) (const_int -2046))
(le (minus (pc) (match_dup 3)) (const_int 2045)))
(const_int 3)
(if_then_else (match_test "!AVR_HAVE_JMP_CALL")
(const_int 3)
(const_int 5))))
(set_attr "cc" "clobber")])
(define_insn "*sbix_branch_tmp_bit7"
[(set (pc)
(if_then_else
(match_operator 0 "gelt_operator"
[(mem:QI (match_operand 1 "high_io_address_operand" "n"))
(const_int 0)])
(label_ref (match_operand 2 "" ""))
(pc)))]
""
{
operands[3] = operands[2];
operands[2] = GEN_INT (7);
return avr_out_sbxx_branch (insn, operands);
}
[(set (attr "length")
(if_then_else (and (ge (minus (pc) (match_dup 2)) (const_int -2046))
(le (minus (pc) (match_dup 2)) (const_int 2045)))
(const_int 3)
(if_then_else (match_test "!AVR_HAVE_JMP_CALL")
(const_int 3)
(const_int 5))))
(set_attr "cc" "clobber")])
;; ************************* Peepholes ********************************
(define_peephole ; "*dec-and-branchsi!=-1.d.clobber"
[(parallel [(set (match_operand:SI 0 "d_register_operand" "")
(plus:SI (match_dup 0)
(const_int -1)))
(clobber (scratch:QI))])
(parallel [(set (cc0)
(compare (match_dup 0)
(const_int -1)))
(clobber (match_operand:QI 1 "d_register_operand" ""))])
(set (pc)
(if_then_else (eqne (cc0)
(const_int 0))
(label_ref (match_operand 2 "" ""))
(pc)))]
""
{
const char *op;
int jump_mode;
CC_STATUS_INIT;
if (test_hard_reg_class (ADDW_REGS, operands[0]))
output_asm_insn ("sbiw %0,1" CR_TAB
"sbc %C0,__zero_reg__" CR_TAB
"sbc %D0,__zero_reg__", operands);
else
output_asm_insn ("subi %A0,1" CR_TAB
"sbc %B0,__zero_reg__" CR_TAB
"sbc %C0,__zero_reg__" CR_TAB
"sbc %D0,__zero_reg__", operands);
jump_mode = avr_jump_mode (operands[2], insn);
op = ((EQ == ) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[1] = gen_rtx_CONST_STRING (VOIDmode, op);
switch (jump_mode)
{
case 1: return "%1 %2";
case 2: return "%1 .+2\;rjmp %2";
case 3: return "%1 .+4\;jmp %2";
}
gcc_unreachable();
return "";
})
(define_peephole ; "*dec-and-branchhi!=-1"
[(set (match_operand:HI 0 "d_register_operand" "")
(plus:HI (match_dup 0)
(const_int -1)))
(parallel [(set (cc0)
(compare (match_dup 0)
(const_int -1)))
(clobber (match_operand:QI 1 "d_register_operand" ""))])
(set (pc)
(if_then_else (eqne (cc0)
(const_int 0))
(label_ref (match_operand 2 "" ""))
(pc)))]
""
{
const char *op;
int jump_mode;
CC_STATUS_INIT;
if (test_hard_reg_class (ADDW_REGS, operands[0]))
output_asm_insn ("sbiw %0,1", operands);
else
output_asm_insn ("subi %A0,1" CR_TAB
"sbc %B0,__zero_reg__", operands);
jump_mode = avr_jump_mode (operands[2], insn);
op = ((EQ == ) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[1] = gen_rtx_CONST_STRING (VOIDmode, op);
switch (jump_mode)
{
case 1: return "%1 %2";
case 2: return "%1 .+2\;rjmp %2";
case 3: return "%1 .+4\;jmp %2";
}
gcc_unreachable();
return "";
})
;; Same as above but with clobber flavour of addhi3
(define_peephole ; "*dec-and-branchhi!=-1.d.clobber"
[(parallel [(set (match_operand:HI 0 "d_register_operand" "")
(plus:HI (match_dup 0)
(const_int -1)))
(clobber (scratch:QI))])
(parallel [(set (cc0)
(compare (match_dup 0)
(const_int -1)))
(clobber (match_operand:QI 1 "d_register_operand" ""))])
(set (pc)
(if_then_else (eqne (cc0)
(const_int 0))
(label_ref (match_operand 2 "" ""))
(pc)))]
""
{
const char *op;
int jump_mode;
CC_STATUS_INIT;
if (test_hard_reg_class (ADDW_REGS, operands[0]))
output_asm_insn ("sbiw %0,1", operands);
else
output_asm_insn ("subi %A0,1" CR_TAB
"sbc %B0,__zero_reg__", operands);
jump_mode = avr_jump_mode (operands[2], insn);
op = ((EQ == ) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[1] = gen_rtx_CONST_STRING (VOIDmode, op);
switch (jump_mode)
{
case 1: return "%1 %2";
case 2: return "%1 .+2\;rjmp %2";
case 3: return "%1 .+4\;jmp %2";
}
gcc_unreachable();
return "";
})
;; Same as above but with clobber flavour of addhi3
(define_peephole ; "*dec-and-branchhi!=-1.l.clobber"
[(parallel [(set (match_operand:HI 0 "l_register_operand" "")
(plus:HI (match_dup 0)
(const_int -1)))
(clobber (match_operand:QI 3 "d_register_operand" ""))])
(parallel [(set (cc0)
(compare (match_dup 0)
(const_int -1)))
(clobber (match_operand:QI 1 "d_register_operand" ""))])
(set (pc)
(if_then_else (eqne (cc0)
(const_int 0))
(label_ref (match_operand 2 "" ""))
(pc)))]
""
{
const char *op;
int jump_mode;
CC_STATUS_INIT;
output_asm_insn ("ldi %3,1" CR_TAB
"sub %A0,%3" CR_TAB
"sbc %B0,__zero_reg__", operands);
jump_mode = avr_jump_mode (operands[2], insn);
op = ((EQ == ) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[1] = gen_rtx_CONST_STRING (VOIDmode, op);
switch (jump_mode)
{
case 1: return "%1 %2";
case 2: return "%1 .+2\;rjmp %2";
case 3: return "%1 .+4\;jmp %2";
}
gcc_unreachable();
return "";
})
(define_peephole ; "*dec-and-branchqi!=-1"
[(set (match_operand:QI 0 "d_register_operand" "")
(plus:QI (match_dup 0)
(const_int -1)))
(set (cc0)
(compare (match_dup 0)
(const_int -1)))
(set (pc)
(if_then_else (eqne (cc0)
(const_int 0))
(label_ref (match_operand 1 "" ""))
(pc)))]
""
{
const char *op;
int jump_mode;
CC_STATUS_INIT;
cc_status.value1 = operands[0];
cc_status.flags |= CC_OVERFLOW_UNUSABLE;
output_asm_insn ("subi %A0,1", operands);
jump_mode = avr_jump_mode (operands[1], insn);
op = ((EQ == ) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[0] = gen_rtx_CONST_STRING (VOIDmode, op);
switch (jump_mode)
{
case 1: return "%0 %1";
case 2: return "%0 .+2\;rjmp %1";
case 3: return "%0 .+4\;jmp %1";
}
gcc_unreachable();
return "";
})
(define_peephole ; "*cpse.eq"
[(set (cc0)
(compare (match_operand:ALL1 1 "register_operand" "r,r")
(match_operand:ALL1 2 "reg_or_0_operand" "r,Y00")))
(set (pc)
(if_then_else (eq (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
"jump_over_one_insn_p (insn, operands[0])"
"@
cpse %1,%2
cpse %1,__zero_reg__")
;; This peephole avoids code like
;;
;; TST Rn ; cmpqi3
;; BREQ .+2 ; branch
;; RJMP .Lm
;;
;; Notice that the peephole is always shorter than cmpqi + branch.
;; The reason to write it as peephole is that sequences like
;;
;; AND Rm, Rn
;; BRNE .La
;;
;; shall not be superseeded. With a respective combine pattern
;; the latter sequence would be
;;
;; AND Rm, Rn
;; CPSE Rm, __zero_reg__
;; RJMP .La
;;
;; and thus longer and slower and not easy to be rolled back.
(define_peephole ; "*cpse.ne"
[(set (cc0)
(compare (match_operand:ALL1 1 "register_operand" "")
(match_operand:ALL1 2 "reg_or_0_operand" "")))
(set (pc)
(if_then_else (ne (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
"!AVR_HAVE_JMP_CALL
|| !TARGET_SKIP_BUG"
{
if (operands[2] == CONST0_RTX (mode))
operands[2] = zero_reg_rtx;
return 3 == avr_jump_mode (operands[0], insn)
? "cpse %1,%2\;jmp %0"
: "cpse %1,%2\;rjmp %0";
})
;;pppppppppppppppppppppppppppppppppppppppppppppppppppp
;;prologue/epilogue support instructions
(define_insn "popqi"
[(set (match_operand:QI 0 "register_operand" "=r")
(mem:QI (pre_inc:HI (reg:HI REG_SP))))]
""
"pop %0"
[(set_attr "cc" "none")
(set_attr "length" "1")])
;; Enable Interrupts
(define_expand "enable_interrupt"
[(clobber (const_int 0))]
""
{
rtx mem = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
MEM_VOLATILE_P (mem) = 1;
emit_insn (gen_cli_sei (const1_rtx, mem));
DONE;
})
;; Disable Interrupts
(define_expand "disable_interrupt"
[(clobber (const_int 0))]
""
{
rtx mem = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
MEM_VOLATILE_P (mem) = 1;
emit_insn (gen_cli_sei (const0_rtx, mem));
DONE;
})
(define_insn "cli_sei"
[(unspec_volatile [(match_operand:QI 0 "const_int_operand" "L,P")]
UNSPECV_ENABLE_IRQS)
(set (match_operand:BLK 1 "" "")
(unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))]
""
"@
cli
sei"
[(set_attr "length" "1")
(set_attr "cc" "none")])
;; Library prologue saves
(define_insn "call_prologue_saves"
[(unspec_volatile:HI [(const_int 0)] UNSPECV_PROLOGUE_SAVES)
(match_operand:HI 0 "immediate_operand" "i,i")
(set (reg:HI REG_SP)
(minus:HI (reg:HI REG_SP)
(match_operand:HI 1 "immediate_operand" "i,i")))
(use (reg:HI REG_X))
(clobber (reg:HI REG_Z))]
""
"ldi r30,lo8(gs(1f))
ldi r31,hi8(gs(1f))
%~jmp __prologue_saves__+((18 - %0) * 2)
1:"
[(set_attr "length" "5,6")
(set_attr "cc" "clobber")
(set_attr "isa" "rjmp,jmp")])
; epilogue restores using library
(define_insn "epilogue_restores"
[(unspec_volatile:QI [(const_int 0)] UNSPECV_EPILOGUE_RESTORES)
(set (reg:HI REG_Y)
(plus:HI (reg:HI REG_Y)
(match_operand:HI 0 "immediate_operand" "i,i")))
(set (reg:HI REG_SP)
(plus:HI (reg:HI REG_Y)
(match_dup 0)))
(clobber (reg:QI REG_Z))]
""
"ldi r30, lo8(%0)
%~jmp __epilogue_restores__ + ((18 - %0) * 2)"
[(set_attr "length" "2,3")
(set_attr "cc" "clobber")
(set_attr "isa" "rjmp,jmp")])
; return
(define_insn "return"
[(return)]
"reload_completed && avr_simple_epilogue ()"
"ret"
[(set_attr "cc" "none")
(set_attr "length" "1")])
(define_insn "return_from_epilogue"
[(return)]
"reload_completed
&& cfun->machine
&& !(cfun->machine->is_interrupt || cfun->machine->is_signal)
&& !cfun->machine->is_naked"
"ret"
[(set_attr "cc" "none")
(set_attr "length" "1")])
(define_insn "return_from_interrupt_epilogue"
[(return)]
"reload_completed
&& cfun->machine
&& (cfun->machine->is_interrupt || cfun->machine->is_signal)
&& !cfun->machine->is_naked"
"reti"
[(set_attr "cc" "none")
(set_attr "length" "1")])
(define_insn "return_from_naked_epilogue"
[(return)]
"reload_completed
&& cfun->machine
&& cfun->machine->is_naked"
""
[(set_attr "cc" "none")
(set_attr "length" "0")])
(define_expand "prologue"
[(const_int 0)]
""
{
avr_expand_prologue ();
DONE;
})
(define_expand "epilogue"
[(const_int 0)]
""
{
avr_expand_epilogue (false /* sibcall_p */);
DONE;
})
(define_expand "sibcall_epilogue"
[(const_int 0)]
""
{
avr_expand_epilogue (true /* sibcall_p */);
DONE;
})
;; Some instructions resp. instruction sequences available
;; via builtins.
(define_insn "delay_cycles_1"
[(unspec_volatile [(match_operand:QI 0 "const_int_operand" "n")
(const_int 1)]
UNSPECV_DELAY_CYCLES)
(set (match_operand:BLK 1 "" "")
(unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))
(clobber (match_scratch:QI 2 "=&d"))]
""
"ldi %2,lo8(%0)
1: dec %2
brne 1b"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_insn "delay_cycles_2"
[(unspec_volatile [(match_operand:HI 0 "const_int_operand" "n,n")
(const_int 2)]
UNSPECV_DELAY_CYCLES)
(set (match_operand:BLK 1 "" "")
(unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))
(clobber (match_scratch:HI 2 "=&w,&d"))]
""
"@
ldi %A2,lo8(%0)\;ldi %B2,hi8(%0)\n1: sbiw %A2,1\;brne 1b
ldi %A2,lo8(%0)\;ldi %B2,hi8(%0)\n1: subi %A2,1\;sbci %B2,0\;brne 1b"
[(set_attr "length" "4,5")
(set_attr "isa" "no_tiny,tiny")
(set_attr "cc" "clobber")])
(define_insn "delay_cycles_3"
[(unspec_volatile [(match_operand:SI 0 "const_int_operand" "n")
(const_int 3)]
UNSPECV_DELAY_CYCLES)
(set (match_operand:BLK 1 "" "")
(unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))
(clobber (match_scratch:QI 2 "=&d"))
(clobber (match_scratch:QI 3 "=&d"))
(clobber (match_scratch:QI 4 "=&d"))]
""
"ldi %2,lo8(%0)
ldi %3,hi8(%0)
ldi %4,hlo8(%0)
1: subi %2,1
sbci %3,0
sbci %4,0
brne 1b"
[(set_attr "length" "7")
(set_attr "cc" "clobber")])
(define_insn "delay_cycles_4"
[(unspec_volatile [(match_operand:SI 0 "const_int_operand" "n")
(const_int 4)]
UNSPECV_DELAY_CYCLES)
(set (match_operand:BLK 1 "" "")
(unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))
(clobber (match_scratch:QI 2 "=&d"))
(clobber (match_scratch:QI 3 "=&d"))
(clobber (match_scratch:QI 4 "=&d"))
(clobber (match_scratch:QI 5 "=&d"))]
""
"ldi %2,lo8(%0)
ldi %3,hi8(%0)
ldi %4,hlo8(%0)
ldi %5,hhi8(%0)
1: subi %2,1
sbci %3,0
sbci %4,0
sbci %5,0
brne 1b"
[(set_attr "length" "9")
(set_attr "cc" "clobber")])
;; __builtin_avr_insert_bits
(define_insn "insert_bits"
[(set (match_operand:QI 0 "register_operand" "=r ,d ,r")
(unspec:QI [(match_operand:SI 1 "const_int_operand" "C0f,Cxf,C0f")
(match_operand:QI 2 "register_operand" "r ,r ,r")
(match_operand:QI 3 "nonmemory_operand" "n ,0 ,0")]
UNSPEC_INSERT_BITS))]
""
{
return avr_out_insert_bits (operands, NULL);
}
[(set_attr "adjust_len" "insert_bits")
(set_attr "cc" "clobber")])
;; __builtin_avr_flash_segment
;; Just a helper for the next "official" expander.
(define_expand "flash_segment1"
[(set (match_operand:QI 0 "register_operand" "")
(subreg:QI (match_operand:PSI 1 "register_operand" "")
2))
(set (cc0)
(compare (match_dup 0)
(const_int 0)))
(set (pc)
(if_then_else (ge (cc0)
(const_int 0))
(label_ref (match_operand 2 "" ""))
(pc)))
(set (match_dup 0)
(const_int -1))])
(define_expand "flash_segment"
[(parallel [(match_operand:QI 0 "register_operand" "")
(match_operand:PSI 1 "register_operand" "")])]
""
{
rtx label = gen_label_rtx ();
emit (gen_flash_segment1 (operands[0], operands[1], label));
emit_label (label);
DONE;
})
;; Actually, it's too late now to work out address spaces known at compiletime.
;; Best place would be to fold ADDR_SPACE_CONVERT_EXPR in avr_fold_builtin.
;; However, avr_addr_space_convert can add some built-in knowledge for PSTR
;; so that ADDR_SPACE_CONVERT_EXPR in the built-in must not be resolved.
(define_insn_and_split "*split.flash_segment"
[(set (match_operand:QI 0 "register_operand" "=d")
(subreg:QI (lo_sum:PSI (match_operand:QI 1 "nonmemory_operand" "ri")
(match_operand:HI 2 "register_operand" "r"))
2))]
""
{ gcc_unreachable(); }
""
[(set (match_dup 0)
(match_dup 1))])
;; Parity
;; Postpone expansion of 16-bit parity to libgcc call until after combine for
;; better 8-bit parity recognition.
(define_expand "parityhi2"
[(parallel [(set (match_operand:HI 0 "register_operand" "")
(parity:HI (match_operand:HI 1 "register_operand" "")))
(clobber (reg:HI 24))])])
(define_insn_and_split "*parityhi2"
[(set (match_operand:HI 0 "register_operand" "=r")
(parity:HI (match_operand:HI 1 "register_operand" "r")))
(clobber (reg:HI 24))]
"!reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:HI 24)
(match_dup 1))
(set (reg:HI 24)
(parity:HI (reg:HI 24)))
(set (match_dup 0)
(reg:HI 24))])
(define_insn_and_split "*parityqihi2"
[(set (match_operand:HI 0 "register_operand" "=r")
(parity:HI (match_operand:QI 1 "register_operand" "r")))
(clobber (reg:HI 24))]
"!reload_completed"
{ gcc_unreachable(); }
"&& 1"
[(set (reg:QI 24)
(match_dup 1))
(set (reg:HI 24)
(zero_extend:HI (parity:QI (reg:QI 24))))
(set (match_dup 0)
(reg:HI 24))])
(define_expand "paritysi2"
[(set (reg:SI 22)
(match_operand:SI 1 "register_operand" ""))
(set (reg:HI 24)
(truncate:HI (parity:SI (reg:SI 22))))
(set (match_dup 2)
(reg:HI 24))
(set (match_operand:SI 0 "register_operand" "")
(zero_extend:SI (match_dup 2)))]
""
{
operands[2] = gen_reg_rtx (HImode);
})
(define_insn "*parityhi2.libgcc"
[(set (reg:HI 24)
(parity:HI (reg:HI 24)))]
""
"%~call __parityhi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*parityqihi2.libgcc"
[(set (reg:HI 24)
(zero_extend:HI (parity:QI (reg:QI 24))))]
""
"%~call __parityqi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*paritysihi2.libgcc"
[(set (reg:HI 24)
(truncate:HI (parity:SI (reg:SI 22))))]
""
"%~call __paritysi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; Popcount
(define_expand "popcounthi2"
[(set (reg:HI 24)
(match_operand:HI 1 "register_operand" ""))
(set (reg:HI 24)
(popcount:HI (reg:HI 24)))
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 24))]
""
"")
(define_expand "popcountsi2"
[(set (reg:SI 22)
(match_operand:SI 1 "register_operand" ""))
(set (reg:HI 24)
(truncate:HI (popcount:SI (reg:SI 22))))
(set (match_dup 2)
(reg:HI 24))
(set (match_operand:SI 0 "register_operand" "")
(zero_extend:SI (match_dup 2)))]
""
{
operands[2] = gen_reg_rtx (HImode);
})
(define_insn "*popcounthi2.libgcc"
[(set (reg:HI 24)
(popcount:HI (reg:HI 24)))]
""
"%~call __popcounthi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*popcountsi2.libgcc"
[(set (reg:HI 24)
(truncate:HI (popcount:SI (reg:SI 22))))]
""
"%~call __popcountsi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*popcountqi2.libgcc"
[(set (reg:QI 24)
(popcount:QI (reg:QI 24)))]
""
"%~call __popcountqi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn_and_split "*popcountqihi2.libgcc"
[(set (reg:HI 24)
(zero_extend:HI (popcount:QI (reg:QI 24))))]
""
"#"
""
[(set (reg:QI 24)
(popcount:QI (reg:QI 24)))
(set (reg:QI 25)
(const_int 0))])
;; Count Leading Zeros
(define_expand "clzhi2"
[(set (reg:HI 24)
(match_operand:HI 1 "register_operand" ""))
(parallel [(set (reg:HI 24)
(clz:HI (reg:HI 24)))
(clobber (reg:QI 26))])
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 24))])
(define_expand "clzsi2"
[(set (reg:SI 22)
(match_operand:SI 1 "register_operand" ""))
(parallel [(set (reg:HI 24)
(truncate:HI (clz:SI (reg:SI 22))))
(clobber (reg:QI 26))])
(set (match_dup 2)
(reg:HI 24))
(set (match_operand:SI 0 "register_operand" "")
(zero_extend:SI (match_dup 2)))]
""
{
operands[2] = gen_reg_rtx (HImode);
})
(define_insn "*clzhi2.libgcc"
[(set (reg:HI 24)
(clz:HI (reg:HI 24)))
(clobber (reg:QI 26))]
""
"%~call __clzhi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*clzsihi2.libgcc"
[(set (reg:HI 24)
(truncate:HI (clz:SI (reg:SI 22))))
(clobber (reg:QI 26))]
""
"%~call __clzsi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; Count Trailing Zeros
(define_expand "ctzhi2"
[(set (reg:HI 24)
(match_operand:HI 1 "register_operand" ""))
(parallel [(set (reg:HI 24)
(ctz:HI (reg:HI 24)))
(clobber (reg:QI 26))])
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 24))])
(define_expand "ctzsi2"
[(set (reg:SI 22)
(match_operand:SI 1 "register_operand" ""))
(parallel [(set (reg:HI 24)
(truncate:HI (ctz:SI (reg:SI 22))))
(clobber (reg:QI 22))
(clobber (reg:QI 26))])
(set (match_dup 2)
(reg:HI 24))
(set (match_operand:SI 0 "register_operand" "")
(zero_extend:SI (match_dup 2)))]
""
{
operands[2] = gen_reg_rtx (HImode);
})
(define_insn "*ctzhi2.libgcc"
[(set (reg:HI 24)
(ctz:HI (reg:HI 24)))
(clobber (reg:QI 26))]
""
"%~call __ctzhi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*ctzsihi2.libgcc"
[(set (reg:HI 24)
(truncate:HI (ctz:SI (reg:SI 22))))
(clobber (reg:QI 22))
(clobber (reg:QI 26))]
""
"%~call __ctzsi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; Find First Set
(define_expand "ffshi2"
[(set (reg:HI 24)
(match_operand:HI 1 "register_operand" ""))
(parallel [(set (reg:HI 24)
(ffs:HI (reg:HI 24)))
(clobber (reg:QI 26))])
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 24))])
(define_expand "ffssi2"
[(set (reg:SI 22)
(match_operand:SI 1 "register_operand" ""))
(parallel [(set (reg:HI 24)
(truncate:HI (ffs:SI (reg:SI 22))))
(clobber (reg:QI 22))
(clobber (reg:QI 26))])
(set (match_dup 2)
(reg:HI 24))
(set (match_operand:SI 0 "register_operand" "")
(zero_extend:SI (match_dup 2)))]
""
{
operands[2] = gen_reg_rtx (HImode);
})
(define_insn "*ffshi2.libgcc"
[(set (reg:HI 24)
(ffs:HI (reg:HI 24)))
(clobber (reg:QI 26))]
""
"%~call __ffshi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
(define_insn "*ffssihi2.libgcc"
[(set (reg:HI 24)
(truncate:HI (ffs:SI (reg:SI 22))))
(clobber (reg:QI 22))
(clobber (reg:QI 26))]
""
"%~call __ffssi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; Copysign
(define_insn "copysignsf3"
[(set (match_operand:SF 0 "register_operand" "=r")
(unspec:SF [(match_operand:SF 1 "register_operand" "0")
(match_operand:SF 2 "register_operand" "r")]
UNSPEC_COPYSIGN))]
""
"bst %D2,7\;bld %D0,7"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; Swap Bytes (change byte-endianness)
(define_expand "bswapsi2"
[(set (reg:SI 22)
(match_operand:SI 1 "register_operand" ""))
(set (reg:SI 22)
(bswap:SI (reg:SI 22)))
(set (match_operand:SI 0 "register_operand" "")
(reg:SI 22))])
(define_insn "*bswapsi2.libgcc"
[(set (reg:SI 22)
(bswap:SI (reg:SI 22)))]
""
"%~call __bswapsi2"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; CPU instructions
;; NOP taking 1 or 2 Ticks
(define_expand "nopv"
[(parallel [(unspec_volatile [(match_operand:SI 0 "const_int_operand" "")]
UNSPECV_NOP)
(set (match_dup 1)
(unspec_volatile:BLK [(match_dup 1)]
UNSPECV_MEMORY_BARRIER))])]
""
{
operands[1] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
MEM_VOLATILE_P (operands[1]) = 1;
})
(define_insn "*nopv"
[(unspec_volatile [(match_operand:SI 0 "const_int_operand" "P,K")]
UNSPECV_NOP)
(set (match_operand:BLK 1 "" "")
(unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))]
""
"@
nop
rjmp ."
[(set_attr "length" "1")
(set_attr "cc" "none")])
;; SLEEP
(define_expand "sleep"
[(parallel [(unspec_volatile [(const_int 0)] UNSPECV_SLEEP)
(set (match_dup 0)
(unspec_volatile:BLK [(match_dup 0)]
UNSPECV_MEMORY_BARRIER))])]
""
{
operands[0] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
MEM_VOLATILE_P (operands[0]) = 1;
})
(define_insn "*sleep"
[(unspec_volatile [(const_int 0)] UNSPECV_SLEEP)
(set (match_operand:BLK 0 "" "")
(unspec_volatile:BLK [(match_dup 0)] UNSPECV_MEMORY_BARRIER))]
""
"sleep"
[(set_attr "length" "1")
(set_attr "cc" "none")])
;; WDR
(define_expand "wdr"
[(parallel [(unspec_volatile [(const_int 0)] UNSPECV_WDR)
(set (match_dup 0)
(unspec_volatile:BLK [(match_dup 0)]
UNSPECV_MEMORY_BARRIER))])]
""
{
operands[0] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
MEM_VOLATILE_P (operands[0]) = 1;
})
(define_insn "*wdr"
[(unspec_volatile [(const_int 0)] UNSPECV_WDR)
(set (match_operand:BLK 0 "" "")
(unspec_volatile:BLK [(match_dup 0)] UNSPECV_MEMORY_BARRIER))]
""
"wdr"
[(set_attr "length" "1")
(set_attr "cc" "none")])
;; FMUL
(define_expand "fmul"
[(set (reg:QI 24)
(match_operand:QI 1 "register_operand" ""))
(set (reg:QI 25)
(match_operand:QI 2 "register_operand" ""))
(parallel [(set (reg:HI 22)
(unspec:HI [(reg:QI 24)
(reg:QI 25)] UNSPEC_FMUL))
(clobber (reg:HI 24))])
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 22))]
""
{
if (AVR_HAVE_MUL)
{
emit_insn (gen_fmul_insn (operand0, operand1, operand2));
DONE;
}
avr_fix_inputs (operands, 1 << 2, regmask (QImode, 24));
})
(define_insn "fmul_insn"
[(set (match_operand:HI 0 "register_operand" "=r")
(unspec:HI [(match_operand:QI 1 "register_operand" "a")
(match_operand:QI 2 "register_operand" "a")]
UNSPEC_FMUL))]
"AVR_HAVE_MUL"
"fmul %1,%2
movw %0,r0
clr __zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_insn "*fmul.call"
[(set (reg:HI 22)
(unspec:HI [(reg:QI 24)
(reg:QI 25)] UNSPEC_FMUL))
(clobber (reg:HI 24))]
"!AVR_HAVE_MUL"
"%~call __fmul"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; FMULS
(define_expand "fmuls"
[(set (reg:QI 24)
(match_operand:QI 1 "register_operand" ""))
(set (reg:QI 25)
(match_operand:QI 2 "register_operand" ""))
(parallel [(set (reg:HI 22)
(unspec:HI [(reg:QI 24)
(reg:QI 25)] UNSPEC_FMULS))
(clobber (reg:HI 24))])
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 22))]
""
{
if (AVR_HAVE_MUL)
{
emit_insn (gen_fmuls_insn (operand0, operand1, operand2));
DONE;
}
avr_fix_inputs (operands, 1 << 2, regmask (QImode, 24));
})
(define_insn "fmuls_insn"
[(set (match_operand:HI 0 "register_operand" "=r")
(unspec:HI [(match_operand:QI 1 "register_operand" "a")
(match_operand:QI 2 "register_operand" "a")]
UNSPEC_FMULS))]
"AVR_HAVE_MUL"
"fmuls %1,%2
movw %0,r0
clr __zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_insn "*fmuls.call"
[(set (reg:HI 22)
(unspec:HI [(reg:QI 24)
(reg:QI 25)] UNSPEC_FMULS))
(clobber (reg:HI 24))]
"!AVR_HAVE_MUL"
"%~call __fmuls"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; FMULSU
(define_expand "fmulsu"
[(set (reg:QI 24)
(match_operand:QI 1 "register_operand" ""))
(set (reg:QI 25)
(match_operand:QI 2 "register_operand" ""))
(parallel [(set (reg:HI 22)
(unspec:HI [(reg:QI 24)
(reg:QI 25)] UNSPEC_FMULSU))
(clobber (reg:HI 24))])
(set (match_operand:HI 0 "register_operand" "")
(reg:HI 22))]
""
{
if (AVR_HAVE_MUL)
{
emit_insn (gen_fmulsu_insn (operand0, operand1, operand2));
DONE;
}
avr_fix_inputs (operands, 1 << 2, regmask (QImode, 24));
})
(define_insn "fmulsu_insn"
[(set (match_operand:HI 0 "register_operand" "=r")
(unspec:HI [(match_operand:QI 1 "register_operand" "a")
(match_operand:QI 2 "register_operand" "a")]
UNSPEC_FMULSU))]
"AVR_HAVE_MUL"
"fmulsu %1,%2
movw %0,r0
clr __zero_reg__"
[(set_attr "length" "3")
(set_attr "cc" "clobber")])
(define_insn "*fmulsu.call"
[(set (reg:HI 22)
(unspec:HI [(reg:QI 24)
(reg:QI 25)] UNSPEC_FMULSU))
(clobber (reg:HI 24))]
"!AVR_HAVE_MUL"
"%~call __fmulsu"
[(set_attr "type" "xcall")
(set_attr "cc" "clobber")])
;; Some combiner patterns dealing with bits.
;; See PR42210
;; Move bit $3.0 into bit $0.$4
(define_insn "*movbitqi.1-6.a"
[(set (match_operand:QI 0 "register_operand" "=r")
(ior:QI (and:QI (match_operand:QI 1 "register_operand" "0")
(match_operand:QI 2 "single_zero_operand" "n"))
(and:QI (ashift:QI (match_operand:QI 3 "register_operand" "r")
(match_operand:QI 4 "const_0_to_7_operand" "n"))
(match_operand:QI 5 "single_one_operand" "n"))))]
"INTVAL(operands[4]) == exact_log2 (~INTVAL(operands[2]) & GET_MODE_MASK (QImode))
&& INTVAL(operands[4]) == exact_log2 (INTVAL(operands[5]) & GET_MODE_MASK (QImode))"
"bst %3,0\;bld %0,%4"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; Move bit $3.0 into bit $0.$4
;; Variation of above. Unfortunately, there is no canonicalized representation
;; of moving around bits. So what we see here depends on how user writes down
;; bit manipulations.
(define_insn "*movbitqi.1-6.b"
[(set (match_operand:QI 0 "register_operand" "=r")
(ior:QI (and:QI (match_operand:QI 1 "register_operand" "0")
(match_operand:QI 2 "single_zero_operand" "n"))
(ashift:QI (and:QI (match_operand:QI 3 "register_operand" "r")
(const_int 1))
(match_operand:QI 4 "const_0_to_7_operand" "n"))))]
"INTVAL(operands[4]) == exact_log2 (~INTVAL(operands[2]) & GET_MODE_MASK (QImode))"
"bst %3,0\;bld %0,%4"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; Move bit $3.0 into bit $0.0.
;; For bit 0, combiner generates slightly different pattern.
(define_insn "*movbitqi.0"
[(set (match_operand:QI 0 "register_operand" "=r")
(ior:QI (and:QI (match_operand:QI 1 "register_operand" "0")
(match_operand:QI 2 "single_zero_operand" "n"))
(and:QI (match_operand:QI 3 "register_operand" "r")
(const_int 1))))]
"0 == exact_log2 (~INTVAL(operands[2]) & GET_MODE_MASK (QImode))"
"bst %3,0\;bld %0,0"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; Move bit $2.0 into bit $0.7.
;; For bit 7, combiner generates slightly different pattern
(define_insn "*movbitqi.7"
[(set (match_operand:QI 0 "register_operand" "=r")
(ior:QI (and:QI (match_operand:QI 1 "register_operand" "0")
(const_int 127))
(ashift:QI (match_operand:QI 2 "register_operand" "r")
(const_int 7))))]
""
"bst %2,0\;bld %0,7"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; Combiner transforms above four pattern into ZERO_EXTRACT if it sees MEM
;; and input/output match. We provide a special pattern for this, because
;; in contrast to a IN/BST/BLD/OUT sequence we need less registers and the
;; operation on I/O is atomic.
(define_insn "*insv.io"
[(set (zero_extract:QI (mem:QI (match_operand 0 "low_io_address_operand" "i,i,i"))
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n,n,n"))
(match_operand:QI 2 "nonmemory_operand" "L,P,r"))]
""
"@
cbi %i0,%1
sbi %i0,%1
sbrc %2,0\;sbi %i0,%1\;sbrs %2,0\;cbi %i0,%1"
[(set_attr "length" "1,1,4")
(set_attr "cc" "none")])
(define_insn "*insv.not.io"
[(set (zero_extract:QI (mem:QI (match_operand 0 "low_io_address_operand" "i"))
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n"))
(not:QI (match_operand:QI 2 "register_operand" "r")))]
""
"sbrs %2,0\;sbi %i0,%1\;sbrc %2,0\;cbi %i0,%1"
[(set_attr "length" "4")
(set_attr "cc" "none")])
;; The insv expander.
;; We only support 1-bit inserts
(define_expand "insv"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "")
(match_operand:QI 1 "const1_operand" "") ; width
(match_operand:QI 2 "const_0_to_7_operand" "")) ; pos
(match_operand:QI 3 "nonmemory_operand" ""))]
"optimize")
;; Some more patterns to support moving around one bit which can be accomplished
;; by BST + BLD in most situations. Unfortunately, there is no canonical
;; representation, and we just implement some more cases that are not too
;; complicated.
;; Insert bit $2.0 into $0.$1
(define_insn "*insv.reg"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "+r,d,d,l,l")
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n,n,n,n,n"))
(match_operand:QI 2 "nonmemory_operand" "r,L,P,L,P"))]
""
"@
bst %2,0\;bld %0,%1
andi %0,lo8(~(1<<%1))
ori %0,lo8(1<<%1)
clt\;bld %0,%1
set\;bld %0,%1"
[(set_attr "length" "2,1,1,2,2")
(set_attr "cc" "none,set_zn,set_zn,none,none")])
;; Insert bit $2.$3 into $0.$1
(define_insn "*insv.extract"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "+r")
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n"))
(any_extract:QI (match_operand:QI 2 "register_operand" "r")
(const_int 1)
(match_operand:QI 3 "const_0_to_7_operand" "n")))]
""
"bst %2,%3\;bld %0,%1"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; Insert bit $2.$3 into $0.$1
(define_insn "*insv.shiftrt"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "+r")
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n"))
(any_shiftrt:QI (match_operand:QI 2 "register_operand" "r")
(match_operand:QI 3 "const_0_to_7_operand" "n")))]
""
"bst %2,%3\;bld %0,%1"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; Same, but with a NOT inverting the source bit.
;; Insert bit ~$2.$3 into $0.$1
(define_insn "*insv.not-shiftrt"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "+r")
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n"))
(not:QI (any_shiftrt:QI (match_operand:QI 2 "register_operand" "r")
(match_operand:QI 3 "const_0_to_7_operand" "n"))))]
""
{
return avr_out_insert_notbit (insn, operands, NULL_RTX, NULL);
}
[(set_attr "adjust_len" "insv_notbit")
(set_attr "cc" "clobber")])
;; Insert bit ~$2.0 into $0.$1
(define_insn "*insv.xor1-bit.0"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "+r")
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n"))
(xor:QI (match_operand:QI 2 "register_operand" "r")
(const_int 1)))]
""
{
return avr_out_insert_notbit (insn, operands, const0_rtx, NULL);
}
[(set_attr "adjust_len" "insv_notbit_0")
(set_attr "cc" "clobber")])
;; Insert bit ~$2.0 into $0.$1
(define_insn "*insv.not-bit.0"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "+r")
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n"))
(not:QI (match_operand:QI 2 "register_operand" "r")))]
""
{
return avr_out_insert_notbit (insn, operands, const0_rtx, NULL);
}
[(set_attr "adjust_len" "insv_notbit_0")
(set_attr "cc" "clobber")])
;; Insert bit ~$2.7 into $0.$1
(define_insn "*insv.not-bit.7"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "+r")
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n"))
(ge:QI (match_operand:QI 2 "register_operand" "r")
(const_int 0)))]
""
{
return avr_out_insert_notbit (insn, operands, GEN_INT (7), NULL);
}
[(set_attr "adjust_len" "insv_notbit_7")
(set_attr "cc" "clobber")])
;; Insert bit ~$2.$3 into $0.$1
(define_insn "*insv.xor-extract"
[(set (zero_extract:QI (match_operand:QI 0 "register_operand" "+r")
(const_int 1)
(match_operand:QI 1 "const_0_to_7_operand" "n"))
(any_extract:QI (xor:QI (match_operand:QI 2 "register_operand" "r")
(match_operand:QI 4 "const_int_operand" "n"))
(const_int 1)
(match_operand:QI 3 "const_0_to_7_operand" "n")))]
"INTVAL (operands[4]) & (1 << INTVAL (operands[3]))"
{
return avr_out_insert_notbit (insn, operands, NULL_RTX, NULL);
}
[(set_attr "adjust_len" "insv_notbit")
(set_attr "cc" "clobber")])
;; Some combine patterns that try to fix bad code when a value is composed
;; from byte parts like in PR27663.
;; The patterns give some release but the code still is not optimal,
;; in particular when subreg lowering (-fsplit-wide-types) is turned on.
;; That switch obfuscates things here and in many other places.
;; "*iorhiqi.byte0" "*iorpsiqi.byte0" "*iorsiqi.byte0"
;; "*xorhiqi.byte0" "*xorpsiqi.byte0" "*xorsiqi.byte0"
(define_insn_and_split "*qi.byte0"
[(set (match_operand:HISI 0 "register_operand" "=r")
(xior:HISI
(zero_extend:HISI (match_operand:QI 1 "register_operand" "r"))
(match_operand:HISI 2 "register_operand" "0")))]
""
"#"
"reload_completed"
[(set (match_dup 3)
(xior:QI (match_dup 3)
(match_dup 1)))]
{
operands[3] = simplify_gen_subreg (QImode, operands[0], mode, 0);
})
;; "*iorhiqi.byte1-3" "*iorpsiqi.byte1-3" "*iorsiqi.byte1-3"
;; "*xorhiqi.byte1-3" "*xorpsiqi.byte1-3" "*xorsiqi.byte1-3"
(define_insn_and_split "*qi.byte1-3"
[(set (match_operand:HISI 0 "register_operand" "=r")
(xior:HISI
(ashift:HISI (zero_extend:HISI (match_operand:QI 1 "register_operand" "r"))
(match_operand:QI 2 "const_8_16_24_operand" "n"))
(match_operand:HISI 3 "register_operand" "0")))]
"INTVAL(operands[2]) < GET_MODE_BITSIZE (mode)"
"#"
"&& reload_completed"
[(set (match_dup 4)
(xior:QI (match_dup 4)
(match_dup 1)))]
{
int byteno = INTVAL(operands[2]) / BITS_PER_UNIT;
operands[4] = simplify_gen_subreg (QImode, operands[0], mode, byteno);
})
(define_insn_and_split "*iorhi3.ashift8-ext.zerox"
[(set (match_operand:HI 0 "register_operand" "=r")
(ior:HI (ashift:HI (any_extend:HI
(match_operand:QI 1 "register_operand" "r"))
(const_int 8))
(zero_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
"optimize"
{ gcc_unreachable(); }
"&& reload_completed"
[(set (match_dup 1) (xor:QI (match_dup 1) (match_dup 2)))
(set (match_dup 2) (xor:QI (match_dup 2) (match_dup 1)))
(set (match_dup 1) (xor:QI (match_dup 1) (match_dup 2)))]
{
rtx hi = simplify_gen_subreg (QImode, operands[0], HImode, 1);
rtx lo = simplify_gen_subreg (QImode, operands[0], HImode, 0);
if (!reg_overlap_mentioned_p (hi, operands[2]))
{
emit_move_insn (hi, operands[1]);
emit_move_insn (lo, operands[2]);
DONE;
}
else if (!reg_overlap_mentioned_p (lo, operands[1]))
{
emit_move_insn (lo, operands[2]);
emit_move_insn (hi, operands[1]);
DONE;
}
gcc_assert (REGNO (operands[1]) == REGNO (operands[0]));
gcc_assert (REGNO (operands[2]) == 1 + REGNO (operands[0]));
})
(define_insn_and_split "*iorhi3.ashift8-ext.reg"
[(set (match_operand:HI 0 "register_operand" "=r")
(ior:HI (ashift:HI (any_extend:HI
(match_operand:QI 1 "register_operand" "r"))
(const_int 8))
(match_operand:HI 2 "register_operand" "0")))]
"optimize"
{ gcc_unreachable(); }
"&& reload_completed"
[(set (match_dup 3)
(ior:QI (match_dup 4)
(match_dup 1)))]
{
operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 1);
operands[4] = simplify_gen_subreg (QImode, operands[2], HImode, 1);
})
(define_insn_and_split "*iorhi3.ashift8-reg.zerox"
[(set (match_operand:HI 0 "register_operand" "=r")
(ior:HI (ashift:HI (match_operand:HI 1 "register_operand" "r")
(const_int 8))
(zero_extend:HI (match_operand:QI 2 "register_operand" "0"))))]
"optimize"
{ gcc_unreachable(); }
"&& reload_completed"
[(set (match_dup 3)
(match_dup 4))]
{
operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 1);
operands[4] = simplify_gen_subreg (QImode, operands[1], HImode, 0);
})
(define_peephole2
[(set (match_operand:QI 0 "register_operand")
(const_int 0))
(set (match_dup 0)
(ior:QI (match_dup 0)
(match_operand:QI 1 "register_operand")))]
""
[(set (match_dup 0)
(match_dup 1))])
(define_expand "extzv"
[(set (match_operand:QI 0 "register_operand" "")
(zero_extract:QI (match_operand:QI 1 "register_operand" "")
(match_operand:QI 2 "const1_operand" "")
(match_operand:QI 3 "const_0_to_7_operand" "")))])
(define_insn "*extzv"
[(set (match_operand:QI 0 "register_operand" "=*d,*d,*d,*d,r")
(zero_extract:QI (match_operand:QI 1 "register_operand" "0,r,0,0,r")
(const_int 1)
(match_operand:QI 2 "const_0_to_7_operand" "L,L,P,C04,n")))]
""
"@
andi %0,1
mov %0,%1\;andi %0,1
lsr %0\;andi %0,1
swap %0\;andi %0,1
bst %1,%2\;clr %0\;bld %0,0"
[(set_attr "length" "1,2,2,2,3")
(set_attr "cc" "set_zn,set_zn,set_zn,set_zn,clobber")])
(define_insn_and_split "*extzv.qihi1"
[(set (match_operand:HI 0 "register_operand" "=r")
(zero_extract:HI (match_operand:QI 1 "register_operand" "r")
(const_int 1)
(match_operand:QI 2 "const_0_to_7_operand" "n")))]
""
"#"
""
[(set (match_dup 3)
(zero_extract:QI (match_dup 1)
(const_int 1)
(match_dup 2)))
(set (match_dup 4)
(const_int 0))]
{
operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 0);
operands[4] = simplify_gen_subreg (QImode, operands[0], HImode, 1);
})
(define_insn_and_split "*extzv.qihi2"
[(set (match_operand:HI 0 "register_operand" "=r")
(zero_extend:HI
(zero_extract:QI (match_operand:QI 1 "register_operand" "r")
(const_int 1)
(match_operand:QI 2 "const_0_to_7_operand" "n"))))]
""
"#"
""
[(set (match_dup 3)
(zero_extract:QI (match_dup 1)
(const_int 1)
(match_dup 2)))
(set (match_dup 4)
(const_int 0))]
{
operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 0);
operands[4] = simplify_gen_subreg (QImode, operands[0], HImode, 1);
})
;; ??? do_store_flag emits a hard-coded right shift to extract a bit without
;; even considering rtx_costs, extzv, or a bit-test. See PR 55181 for an example.
(define_insn_and_split "*extract.subreg.bit"
[(set (match_operand:QI 0 "register_operand" "=r")
(and:QI (subreg:QI (any_shiftrt:HISI (match_operand:HISI 1 "register_operand" "r")
(match_operand:QI 2 "const_int_operand" "n"))
0)
(const_int 1)))]
"INTVAL (operands[2]) < GET_MODE_BITSIZE (mode)"
{ gcc_unreachable(); }
"&& reload_completed"
[;; "*extzv"
(set (match_dup 0)
(zero_extract:QI (match_dup 3)
(const_int 1)
(match_dup 4)))]
{
int bitno = INTVAL (operands[2]);
operands[3] = simplify_gen_subreg (QImode, operands[1], mode, bitno / 8);
operands[4] = GEN_INT (bitno % 8);
})
;; Fixed-point instructions
(include "avr-fixed.md")
;; Operations on 64-bit registers
(include "avr-dimode.md")