------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- P A R . C H 9 -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2019, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ pragma Style_Checks (All_Checks); -- Turn off subprogram body ordering check. Subprograms are in order by RM -- section rather than alphabetical. separate (Par) package body Ch9 is -- Local subprograms, used only in this chapter function P_Accept_Alternative return Node_Id; function P_Delay_Alternative return Node_Id; function P_Delay_Relative_Statement return Node_Id; function P_Delay_Until_Statement return Node_Id; function P_Entry_Barrier return Node_Id; function P_Entry_Body_Formal_Part return Node_Id; function P_Entry_Declaration return Node_Id; function P_Entry_Index_Specification return Node_Id; function P_Protected_Definition return Node_Id; function P_Protected_Operation_Declaration_Opt return Node_Id; function P_Protected_Operation_Items return List_Id; function P_Task_Items return List_Id; function P_Task_Definition return Node_Id; ----------------------------- -- 9.1 Task (also 10.1.3) -- ----------------------------- -- TASK_TYPE_DECLARATION ::= -- task type DEFINING_IDENTIFIER [KNOWN_DISCRIMINANT_PART] -- [ASPECT_SPECIFICATIONS] -- [is [new INTERFACE_LIST with] TASK_DEFINITION]; -- SINGLE_TASK_DECLARATION ::= -- task DEFINING_IDENTIFIER -- [ASPECT_SPECIFICATIONS] -- [is [new INTERFACE_LIST with] TASK_DEFINITION]; -- TASK_BODY ::= -- task body DEFINING_IDENTIFIER [ASPECT_SPECIFICATIONS] is -- DECLARATIVE_PART -- begin -- HANDLED_SEQUENCE_OF_STATEMENTS -- end [task_IDENTIFIER] -- TASK_BODY_STUB ::= -- task body DEFINING_IDENTIFIER is separate -- [ASPECT_SPECIFICATIONS]; -- This routine scans out a task declaration, task body, or task stub -- The caller has checked that the initial token is TASK and scanned -- past it, so that Token is set to the token after TASK -- Error recovery: cannot raise Error_Resync function P_Task return Node_Id is Aspect_Sloc : Source_Ptr := No_Location; Name_Node : Node_Id; Task_Node : Node_Id; Task_Sloc : Source_Ptr; Dummy_Node : constant Node_Id := New_Node (N_Task_Body, Token_Ptr); -- Placeholder node used to hold legal or prematurely declared aspect -- specifications. Depending on the context, the aspect specifications -- may be moved to a new node. begin Push_Scope_Stack; Scope.Table (Scope.Last).Etyp := E_Name; Scope.Table (Scope.Last).Ecol := Start_Column; Scope.Table (Scope.Last).Sloc := Token_Ptr; Scope.Table (Scope.Last).Lreq := False; Task_Sloc := Prev_Token_Ptr; if Token = Tok_Body then Scan; -- past BODY Name_Node := P_Defining_Identifier (C_Is); Scope.Table (Scope.Last).Labl := Name_Node; Current_Node := Name_Node; if Token = Tok_Left_Paren then Error_Msg_SC ("discriminant part not allowed in task body"); Discard_Junk_List (P_Known_Discriminant_Part_Opt); end if; if Aspect_Specifications_Present then Aspect_Sloc := Token_Ptr; P_Aspect_Specifications (Dummy_Node, Semicolon => False); end if; TF_Is; -- Task stub if Token = Tok_Separate then Scan; -- past SEPARATE Task_Node := New_Node (N_Task_Body_Stub, Task_Sloc); Set_Defining_Identifier (Task_Node, Name_Node); if Has_Aspects (Dummy_Node) then Error_Msg ("aspect specifications must come after SEPARATE", Aspect_Sloc); end if; P_Aspect_Specifications (Task_Node, Semicolon => False); TF_Semicolon; Pop_Scope_Stack; -- remove unused entry -- Task body else Task_Node := New_Node (N_Task_Body, Task_Sloc); Set_Defining_Identifier (Task_Node, Name_Node); -- Move the aspect specifications to the body node if Has_Aspects (Dummy_Node) then Move_Aspects (From => Dummy_Node, To => Task_Node); end if; Parse_Decls_Begin_End (Task_Node); -- The statement list of a task body needs to include at least a -- null statement, so if a parsing error produces an empty list, -- patch it now. if No (First (Statements (Handled_Statement_Sequence (Task_Node)))) then Set_Statements (Handled_Statement_Sequence (Task_Node), New_List (Make_Null_Statement (Token_Ptr))); end if; end if; return Task_Node; -- Otherwise we must have a task declaration else if Token = Tok_Type then Scan; -- past TYPE Task_Node := New_Node (N_Task_Type_Declaration, Task_Sloc); Name_Node := P_Defining_Identifier; Set_Defining_Identifier (Task_Node, Name_Node); Scope.Table (Scope.Last).Labl := Name_Node; Current_Node := Name_Node; Set_Discriminant_Specifications (Task_Node, P_Known_Discriminant_Part_Opt); else Task_Node := New_Node (N_Single_Task_Declaration, Task_Sloc); Name_Node := P_Defining_Identifier (C_Is); Set_Defining_Identifier (Task_Node, Name_Node); Scope.Table (Scope.Last).Labl := Name_Node; Current_Node := Name_Node; if Token = Tok_Left_Paren then Error_Msg_SC ("discriminant part not allowed for single task"); Discard_Junk_List (P_Known_Discriminant_Part_Opt); end if; end if; -- Scan aspect specifications, don't eat the semicolon, since it -- might not be there if we have an IS. P_Aspect_Specifications (Task_Node, Semicolon => False); -- Parse optional task definition. Note that P_Task_Definition scans -- out the semicolon and possible aspect specifications as well as -- the task definition itself. if Token = Tok_Semicolon then -- A little check, if the next token after semicolon is Entry, -- then surely the semicolon should really be IS Scan; -- past semicolon if Token = Tok_Entry then Error_Msg_SP -- CODEFIX ("|"";"" should be IS"); Set_Task_Definition (Task_Node, P_Task_Definition); else Pop_Scope_Stack; -- Remove unused entry end if; -- Here we have a task definition else TF_Is; -- must have IS if no semicolon -- Ada 2005 (AI-345) if Token = Tok_New then Scan; -- past NEW if Ada_Version < Ada_2005 then Error_Msg_SP ("task interface is an Ada 2005 extension"); Error_Msg_SP ("\unit must be compiled with -gnat05 switch"); end if; Set_Interface_List (Task_Node, New_List); loop Append (P_Qualified_Simple_Name, Interface_List (Task_Node)); exit when Token /= Tok_And; Scan; -- past AND end loop; if Token /= Tok_With then Error_Msg_SC -- CODEFIX ("WITH expected"); end if; Scan; -- past WITH if Token = Tok_Private then Error_Msg_SP -- CODEFIX ("PRIVATE not allowed in task type declaration"); end if; end if; Set_Task_Definition (Task_Node, P_Task_Definition); end if; return Task_Node; end if; end P_Task; -------------------------------- -- 9.1 Task Type Declaration -- -------------------------------- -- Parsed by P_Task (9.1) ---------------------------------- -- 9.1 Single Task Declaration -- ---------------------------------- -- Parsed by P_Task (9.1) -------------------------- -- 9.1 Task Definition -- -------------------------- -- TASK_DEFINITION ::= -- {TASK_ITEM} -- [private -- {TASK_ITEM}] -- end [task_IDENTIFIER]; -- The caller has already made the scope stack entry -- Note: there is a small deviation from official syntax here in that we -- regard the semicolon after end as part of the Task_Definition, and in -- the official syntax, it's part of the enclosing declaration. The reason -- for this deviation is that otherwise the end processing would have to -- be special cased, which would be a nuisance. -- Error recovery: cannot raise Error_Resync function P_Task_Definition return Node_Id is Def_Node : Node_Id; begin Def_Node := New_Node (N_Task_Definition, Token_Ptr); Set_Visible_Declarations (Def_Node, P_Task_Items); if Token = Tok_Private then Scan; -- past PRIVATE Set_Private_Declarations (Def_Node, P_Task_Items); -- Deal gracefully with multiple PRIVATE parts while Token = Tok_Private loop Error_Msg_SC ("only one private part allowed per task"); Scan; -- past PRIVATE Append_List (P_Task_Items, Private_Declarations (Def_Node)); end loop; end if; End_Statements (Def_Node); return Def_Node; end P_Task_Definition; -------------------- -- 9.1 Task Item -- -------------------- -- TASK_ITEM ::= ENTRY_DECLARATION | REPRESENTATION_CLAUSE -- This subprogram scans a (possibly empty) list of task items and pragmas -- Error recovery: cannot raise Error_Resync -- Note: a pragma can also be returned in this position function P_Task_Items return List_Id is Items : List_Id; Item_Node : Node_Id; Decl_Sloc : Source_Ptr; begin -- Get rid of active SIS entry from outer scope. This means we will -- miss some nested cases, but it doesn't seem worth the effort. See -- discussion in Par for further details SIS_Entry_Active := False; -- Loop to scan out task items Items := New_List; Decl_Loop : loop Decl_Sloc := Token_Ptr; if Token = Tok_Pragma then P_Pragmas_Opt (Items); -- Ada 2005 (AI-397): Reserved words NOT and OVERRIDING may begin an -- entry declaration. elsif Token = Tok_Entry or else Token = Tok_Not or else Token = Tok_Overriding then Append (P_Entry_Declaration, Items); elsif Token = Tok_For then -- Representation clause in task declaration. The only rep clause -- which is legal in a protected declaration is an address clause, -- so that is what we try to scan out. Item_Node := P_Representation_Clause; if Nkind (Item_Node) = N_At_Clause then Append (Item_Node, Items); elsif Nkind (Item_Node) = N_Attribute_Definition_Clause and then Chars (Item_Node) = Name_Address then Append (Item_Node, Items); else Error_Msg ("the only representation clause " & "allowed here is an address clause!", Decl_Sloc); end if; elsif Token = Tok_Identifier or else Token in Token_Class_Declk then Error_Msg_SC ("illegal declaration in task definition"); Resync_Past_Semicolon; else exit Decl_Loop; end if; end loop Decl_Loop; return Items; end P_Task_Items; -------------------- -- 9.1 Task Body -- -------------------- -- Parsed by P_Task (9.1) ---------------------------------- -- 9.4 Protected (also 10.1.3) -- ---------------------------------- -- PROTECTED_TYPE_DECLARATION ::= -- protected type DEFINING_IDENTIFIER [KNOWN_DISCRIMINANT_PART] -- [ASPECT_SPECIFICATIONS] -- is [new INTERFACE_LIST with] PROTECTED_DEFINITION; -- SINGLE_PROTECTED_DECLARATION ::= -- protected DEFINING_IDENTIFIER -- [ASPECT_SPECIFICATIONS] -- is [new INTERFACE_LIST with] PROTECTED_DEFINITION; -- PROTECTED_BODY ::= -- protected body DEFINING_IDENTIFIER -- [ASPECT_SPECIFICATIONS] -- is -- {PROTECTED_OPERATION_ITEM} -- end [protected_IDENTIFIER]; -- PROTECTED_BODY_STUB ::= -- protected body DEFINING_IDENTIFIER is separate -- [ASPECT_SPECIFICATIONS]; -- This routine scans out a protected declaration, protected body -- or a protected stub. -- The caller has checked that the initial token is PROTECTED and -- scanned past it, so Token is set to the following token. -- Error recovery: cannot raise Error_Resync function P_Protected return Node_Id is Aspect_Sloc : Source_Ptr := No_Location; Name_Node : Node_Id; Protected_Node : Node_Id; Protected_Sloc : Source_Ptr; Scan_State : Saved_Scan_State; Dummy_Node : constant Node_Id := New_Node (N_Protected_Body, Token_Ptr); -- Placeholder node used to hold legal or prematurely declared aspect -- specifications. Depending on the context, the aspect specifications -- may be moved to a new node. begin Push_Scope_Stack; Scope.Table (Scope.Last).Etyp := E_Name; Scope.Table (Scope.Last).Ecol := Start_Column; Scope.Table (Scope.Last).Lreq := False; Protected_Sloc := Prev_Token_Ptr; if Token = Tok_Body then Scan; -- past BODY Name_Node := P_Defining_Identifier (C_Is); Scope.Table (Scope.Last).Labl := Name_Node; Current_Node := Name_Node; if Token = Tok_Left_Paren then Error_Msg_SC ("discriminant part not allowed in protected body"); Discard_Junk_List (P_Known_Discriminant_Part_Opt); end if; if Aspect_Specifications_Present then Aspect_Sloc := Token_Ptr; P_Aspect_Specifications (Dummy_Node, Semicolon => False); end if; TF_Is; -- Protected stub if Token = Tok_Separate then Scan; -- past SEPARATE Protected_Node := New_Node (N_Protected_Body_Stub, Protected_Sloc); Set_Defining_Identifier (Protected_Node, Name_Node); if Has_Aspects (Dummy_Node) then Error_Msg ("aspect specifications must come after SEPARATE", Aspect_Sloc); end if; P_Aspect_Specifications (Protected_Node, Semicolon => False); TF_Semicolon; Pop_Scope_Stack; -- remove unused entry -- Protected body else Protected_Node := New_Node (N_Protected_Body, Protected_Sloc); Set_Defining_Identifier (Protected_Node, Name_Node); Move_Aspects (From => Dummy_Node, To => Protected_Node); Set_Declarations (Protected_Node, P_Protected_Operation_Items); End_Statements (Protected_Node); end if; return Protected_Node; -- Otherwise we must have a protected declaration else if Token = Tok_Type then Scan; -- past TYPE Protected_Node := New_Node (N_Protected_Type_Declaration, Protected_Sloc); Name_Node := P_Defining_Identifier (C_Is); Set_Defining_Identifier (Protected_Node, Name_Node); Scope.Table (Scope.Last).Labl := Name_Node; Current_Node := Name_Node; Set_Discriminant_Specifications (Protected_Node, P_Known_Discriminant_Part_Opt); else Protected_Node := New_Node (N_Single_Protected_Declaration, Protected_Sloc); Name_Node := P_Defining_Identifier (C_Is); Set_Defining_Identifier (Protected_Node, Name_Node); if Token = Tok_Left_Paren then Error_Msg_SC ("discriminant part not allowed for single protected"); Discard_Junk_List (P_Known_Discriminant_Part_Opt); end if; Scope.Table (Scope.Last).Labl := Name_Node; Current_Node := Name_Node; end if; P_Aspect_Specifications (Protected_Node, Semicolon => False); -- Check for semicolon not followed by IS, this is something like -- protected type r; -- where we want -- protected type r IS END; if Token = Tok_Semicolon then Save_Scan_State (Scan_State); -- at semicolon Scan; -- past semicolon if Token /= Tok_Is then Restore_Scan_State (Scan_State); Error_Msg_SC -- CODEFIX ("missing IS"); Set_Protected_Definition (Protected_Node, Make_Protected_Definition (Token_Ptr, Visible_Declarations => Empty_List, End_Label => Empty)); SIS_Entry_Active := False; End_Statements (Protected_Definition (Protected_Node), Protected_Node); return Protected_Node; end if; Error_Msg_SP -- CODEFIX ("|extra ""("" ignored"); end if; T_Is; -- Ada 2005 (AI-345) if Token = Tok_New then Scan; -- past NEW if Ada_Version < Ada_2005 then Error_Msg_SP ("protected interface is an Ada 2005 extension"); Error_Msg_SP ("\unit must be compiled with -gnat05 switch"); end if; Set_Interface_List (Protected_Node, New_List); loop Append (P_Qualified_Simple_Name, Interface_List (Protected_Node)); exit when Token /= Tok_And; Scan; -- past AND end loop; if Token /= Tok_With then Error_Msg_SC -- CODEFIX ("WITH expected"); end if; Scan; -- past WITH end if; Set_Protected_Definition (Protected_Node, P_Protected_Definition); return Protected_Node; end if; end P_Protected; ------------------------------------- -- 9.4 Protected Type Declaration -- ------------------------------------- -- Parsed by P_Protected (9.4) --------------------------------------- -- 9.4 Single Protected Declaration -- --------------------------------------- -- Parsed by P_Protected (9.4) ------------------------------- -- 9.4 Protected Definition -- ------------------------------- -- PROTECTED_DEFINITION ::= -- {PROTECTED_OPERATION_DECLARATION} -- [private -- {PROTECTED_ELEMENT_DECLARATION}] -- end [protected_IDENTIFIER] -- PROTECTED_ELEMENT_DECLARATION ::= -- PROTECTED_OPERATION_DECLARATION -- | COMPONENT_DECLARATION -- The caller has already established the scope stack entry -- Error recovery: cannot raise Error_Resync function P_Protected_Definition return Node_Id is Def_Node : Node_Id; Item_Node : Node_Id; Priv_Decls : List_Id; Vis_Decls : List_Id; begin Def_Node := New_Node (N_Protected_Definition, Token_Ptr); -- Get rid of active SIS entry from outer scope. This means we will -- miss some nested cases, but it doesn't seem worth the effort. See -- discussion in Par for further details SIS_Entry_Active := False; -- Loop to scan visible declarations (protected operation declarations) Vis_Decls := New_List; Set_Visible_Declarations (Def_Node, Vis_Decls); -- Flag and discard all pragmas which cannot appear in the protected -- definition. Note that certain pragmas are still allowed as long as -- they apply to entries, entry families, or protected subprograms. P_Pragmas_Opt (Vis_Decls); loop Item_Node := P_Protected_Operation_Declaration_Opt; if Present (Item_Node) then Append (Item_Node, Vis_Decls); end if; P_Pragmas_Opt (Vis_Decls); exit when No (Item_Node); end loop; -- Deal with PRIVATE part (including graceful handling of multiple -- PRIVATE parts). Private_Loop : while Token = Tok_Private loop Priv_Decls := Private_Declarations (Def_Node); if Present (Priv_Decls) then Error_Msg_SC ("duplicate private part"); else Priv_Decls := New_List; Set_Private_Declarations (Def_Node, Priv_Decls); end if; Scan; -- past PRIVATE -- Flag and discard all pragmas which cannot appear in the protected -- definition. Note that certain pragmas are still allowed as long as -- they apply to entries, entry families, or protected subprograms. P_Pragmas_Opt (Priv_Decls); Declaration_Loop : loop if Token = Tok_Identifier then P_Component_Items (Priv_Decls); P_Pragmas_Opt (Priv_Decls); else Item_Node := P_Protected_Operation_Declaration_Opt; if Present (Item_Node) then Append (Item_Node, Priv_Decls); end if; P_Pragmas_Opt (Priv_Decls); exit Declaration_Loop when No (Item_Node); end if; end loop Declaration_Loop; end loop Private_Loop; End_Statements (Def_Node); return Def_Node; end P_Protected_Definition; ------------------------------------------ -- 9.4 Protected Operation Declaration -- ------------------------------------------ -- PROTECTED_OPERATION_DECLARATION ::= -- SUBPROGRAM_DECLARATION -- | ENTRY_DECLARATION -- | REPRESENTATION_CLAUSE -- Error recovery: cannot raise Error_Resync -- Note: a pragma can also be returned in this position -- We are not currently permitting representation clauses to appear as -- protected operation declarations, do we have to rethink this??? function P_Protected_Operation_Declaration_Opt return Node_Id is L : List_Id; P : Source_Ptr; function P_Entry_Or_Subprogram_With_Indicator return Node_Id; -- Ada 2005 (AI-397): Parse an entry or a subprogram with an overriding -- indicator. The caller has checked that the initial token is NOT or -- OVERRIDING. ------------------------------------------ -- P_Entry_Or_Subprogram_With_Indicator -- ------------------------------------------ function P_Entry_Or_Subprogram_With_Indicator return Node_Id is Decl : Node_Id := Error; Is_Overriding : Boolean := False; Not_Overriding : Boolean := False; begin if Token = Tok_Not then Scan; -- past NOT if Token = Tok_Overriding then Scan; -- past OVERRIDING Not_Overriding := True; else Error_Msg_SC -- CODEFIX ("OVERRIDING expected!"); end if; else Scan; -- past OVERRIDING Is_Overriding := True; end if; if Is_Overriding or else Not_Overriding then if Ada_Version < Ada_2005 then Error_Msg_SP ("overriding indicator is an Ada 2005 extension"); Error_Msg_SP ("\unit must be compiled with -gnat05 switch"); elsif Token = Tok_Entry then Decl := P_Entry_Declaration; Set_Must_Override (Decl, Is_Overriding); Set_Must_Not_Override (Decl, Not_Overriding); elsif Token = Tok_Function or else Token = Tok_Procedure then Decl := P_Subprogram (Pf_Decl_Pexp); Set_Must_Override (Specification (Decl), Is_Overriding); Set_Must_Not_Override (Specification (Decl), Not_Overriding); else Error_Msg_SC -- CODEFIX ("ENTRY, FUNCTION or PROCEDURE expected!"); end if; end if; return Decl; end P_Entry_Or_Subprogram_With_Indicator; Result : Node_Id := Empty; -- Start of processing for P_Protected_Operation_Declaration_Opt begin -- This loop runs more than once only when a junk declaration is skipped loop case Token is when Tok_Pragma => Result := P_Pragma; exit; when Tok_Not | Tok_Overriding => Result := P_Entry_Or_Subprogram_With_Indicator; exit; when Tok_Entry => Result := P_Entry_Declaration; exit; when Tok_Function | Tok_Procedure => Result := P_Subprogram (Pf_Decl_Pexp); exit; when Tok_Identifier => L := New_List; P := Token_Ptr; Skip_Declaration (L); if Nkind (First (L)) = N_Object_Declaration then Error_Msg ("component must be declared in private part of " & "protected type", P); else Error_Msg ("illegal declaration in protected definition", P); end if; -- Continue looping when Tok_For => Error_Msg_SC ("representation clause not allowed in protected definition"); Resync_Past_Semicolon; -- Continue looping when others => if Token in Token_Class_Declk then Error_Msg_SC ("illegal declaration in protected definition"); Resync_Past_Semicolon; -- Return now to avoid cascaded messages if next declaration -- is a valid component declaration. Result := Error; end if; exit; end case; end loop; if Nkind (Result) = N_Subprogram_Declaration and then Nkind (Specification (Result)) = N_Procedure_Specification and then Null_Present (Specification (Result)) then Error_Msg_N ("protected operation cannot be a null procedure", Null_Statement (Specification (Result))); end if; return Result; end P_Protected_Operation_Declaration_Opt; ----------------------------------- -- 9.4 Protected Operation Item -- ----------------------------------- -- PROTECTED_OPERATION_ITEM ::= -- SUBPROGRAM_DECLARATION -- | SUBPROGRAM_BODY -- | ENTRY_BODY -- | REPRESENTATION_CLAUSE -- This procedure parses and returns a list of protected operation items -- We are not currently permitting representation clauses to appear -- as protected operation items, do we have to rethink this??? function P_Protected_Operation_Items return List_Id is Item_List : List_Id; begin Item_List := New_List; loop if Token = Tok_Entry or else Bad_Spelling_Of (Tok_Entry) then Append (P_Entry_Body, Item_List); -- If the operation starts with procedure, function, or an overriding -- indicator ("overriding" or "not overriding"), parse a subprogram. elsif Token = Tok_Function or else Bad_Spelling_Of (Tok_Function) or else Token = Tok_Procedure or else Bad_Spelling_Of (Tok_Procedure) or else Token = Tok_Overriding or else Bad_Spelling_Of (Tok_Overriding) or else Token = Tok_Not or else Bad_Spelling_Of (Tok_Not) then Append (P_Subprogram (Pf_Decl_Pbod_Pexp), Item_List); elsif Token = Tok_Pragma or else Bad_Spelling_Of (Tok_Pragma) then P_Pragmas_Opt (Item_List); elsif Token = Tok_Private or else Bad_Spelling_Of (Tok_Private) then Error_Msg_SC ("PRIVATE not allowed in protected body"); Scan; -- past PRIVATE elsif Token = Tok_Identifier then Error_Msg_SC ("all components must be declared in spec!"); Resync_Past_Semicolon; elsif Token in Token_Class_Declk then Error_Msg_SC ("this declaration not allowed in protected body"); Resync_Past_Semicolon; else exit; end if; end loop; return Item_List; end P_Protected_Operation_Items; ------------------------------ -- 9.5.2 Entry Declaration -- ------------------------------ -- ENTRY_DECLARATION ::= -- [OVERRIDING_INDICATOR] -- entry DEFINING_IDENTIFIER -- [(DISCRETE_SUBTYPE_DEFINITION)] PARAMETER_PROFILE -- [ASPECT_SPECIFICATIONS]; -- The caller has checked that the initial token is ENTRY, NOT or -- OVERRIDING. -- Error recovery: cannot raise Error_Resync function P_Entry_Declaration return Node_Id is Decl_Node : Node_Id; Scan_State : Saved_Scan_State; -- Flags for optional overriding indication. Two flags are needed, -- to distinguish positive and negative overriding indicators from -- the absence of any indicator. Is_Overriding : Boolean := False; Not_Overriding : Boolean := False; begin -- Ada 2005 (AI-397): Scan leading overriding indicator if Token = Tok_Not then Scan; -- past NOT if Token = Tok_Overriding then Scan; -- part OVERRIDING Not_Overriding := True; else Error_Msg_SC -- CODEFIX ("OVERRIDING expected!"); end if; elsif Token = Tok_Overriding then Scan; -- part OVERRIDING Is_Overriding := True; end if; if Is_Overriding or else Not_Overriding then if Ada_Version < Ada_2005 then Error_Msg_SP ("overriding indicator is an Ada 2005 extension"); Error_Msg_SP ("\unit must be compiled with -gnat05 switch"); elsif Token /= Tok_Entry then Error_Msg_SC -- CODEFIX ("ENTRY expected!"); end if; end if; Decl_Node := New_Node (N_Entry_Declaration, Token_Ptr); Scan; -- past ENTRY Set_Defining_Identifier (Decl_Node, P_Defining_Identifier (C_Left_Paren_Semicolon)); -- If left paren, could be (Discrete_Subtype_Definition) or Formal_Part if Token = Tok_Left_Paren then Scan; -- past ( -- If identifier after left paren, could still be either if Token = Tok_Identifier then Save_Scan_State (Scan_State); -- at Id Scan; -- past Id -- If comma or colon after Id, must be Formal_Part if Token = Tok_Comma or else Token = Tok_Colon then Restore_Scan_State (Scan_State); -- to Id Set_Parameter_Specifications (Decl_Node, P_Formal_Part); -- Else if Id without comma or colon, must be discrete subtype -- defn else Restore_Scan_State (Scan_State); -- to Id Set_Discrete_Subtype_Definition (Decl_Node, P_Discrete_Subtype_Definition); T_Right_Paren; Set_Parameter_Specifications (Decl_Node, P_Parameter_Profile); end if; -- If no Id, must be discrete subtype definition else Set_Discrete_Subtype_Definition (Decl_Node, P_Discrete_Subtype_Definition); T_Right_Paren; Set_Parameter_Specifications (Decl_Node, P_Parameter_Profile); end if; end if; if Is_Overriding then Set_Must_Override (Decl_Node); elsif Not_Overriding then Set_Must_Not_Override (Decl_Node); end if; -- Error recovery check for illegal return if Token = Tok_Return then Error_Msg_SC ("entry cannot have return value!"); Scan; Discard_Junk_Node (P_Subtype_Indication); end if; -- Error recovery check for improper use of entry barrier in spec if Token = Tok_When then Error_Msg_SC ("barrier not allowed here (belongs in body)"); Scan; -- past WHEN; Discard_Junk_Node (P_Expression_No_Right_Paren); end if; P_Aspect_Specifications (Decl_Node); return Decl_Node; exception when Error_Resync => Resync_Past_Semicolon; return Error; end P_Entry_Declaration; ----------------------------- -- 9.5.2 Accept Statement -- ----------------------------- -- ACCEPT_STATEMENT ::= -- accept entry_DIRECT_NAME -- [(ENTRY_INDEX)] PARAMETER_PROFILE [do -- HANDLED_SEQUENCE_OF_STATEMENTS -- end [entry_IDENTIFIER]]; -- The caller has checked that the initial token is ACCEPT -- Error recovery: cannot raise Error_Resync. If an error occurs, the -- scan is resynchronized past the next semicolon and control returns. function P_Accept_Statement return Node_Id is Scan_State : Saved_Scan_State; Accept_Node : Node_Id; Hand_Seq : Node_Id; begin Push_Scope_Stack; Scope.Table (Scope.Last).Sloc := Token_Ptr; Scope.Table (Scope.Last).Ecol := Start_Column; Accept_Node := New_Node (N_Accept_Statement, Token_Ptr); Scan; -- past ACCEPT Scope.Table (Scope.Last).Labl := Token_Node; Current_Node := Token_Node; Set_Entry_Direct_Name (Accept_Node, P_Identifier (C_Do)); -- Left paren could be (Entry_Index) or Formal_Part, determine which if Token = Tok_Left_Paren then Save_Scan_State (Scan_State); -- at left paren Scan; -- past left paren -- If first token after left paren not identifier, then Entry_Index if Token /= Tok_Identifier then Set_Entry_Index (Accept_Node, P_Expression); T_Right_Paren; Set_Parameter_Specifications (Accept_Node, P_Parameter_Profile); -- First token after left paren is identifier, could be either case else -- Token = Tok_Identifier Scan; -- past identifier -- If identifier followed by comma or colon, must be Formal_Part if Token = Tok_Comma or else Token = Tok_Colon then Restore_Scan_State (Scan_State); -- to left paren Set_Parameter_Specifications (Accept_Node, P_Parameter_Profile); -- If identifier not followed by comma/colon, must be entry index else Restore_Scan_State (Scan_State); -- to left paren Scan; -- past left paren (again) Set_Entry_Index (Accept_Node, P_Expression); T_Right_Paren; Set_Parameter_Specifications (Accept_Node, P_Parameter_Profile); end if; end if; end if; -- Scan out DO if present if Token = Tok_Do then Scope.Table (Scope.Last).Etyp := E_Name; Scope.Table (Scope.Last).Lreq := False; Scan; -- past DO Hand_Seq := P_Handled_Sequence_Of_Statements; Set_Handled_Statement_Sequence (Accept_Node, Hand_Seq); End_Statements (Handled_Statement_Sequence (Accept_Node)); -- Exception handlers not allowed in Ada 95 node if Present (Exception_Handlers (Hand_Seq)) then if Ada_Version = Ada_83 then Error_Msg_N ("(Ada 83) exception handlers in accept not allowed", First_Non_Pragma (Exception_Handlers (Hand_Seq))); end if; end if; else Pop_Scope_Stack; -- discard unused entry TF_Semicolon; end if; return Accept_Node; -- If error, resynchronize past semicolon exception when Error_Resync => Resync_Past_Semicolon; Pop_Scope_Stack; -- discard unused entry return Error; end P_Accept_Statement; ------------------------ -- 9.5.2 Entry Index -- ------------------------ -- Parsed by P_Expression (4.4) -------------------------- -- 9.5.2 Entry Barrier -- -------------------------- -- ENTRY_BARRIER ::= when CONDITION -- Error_Recovery: cannot raise Error_Resync function P_Entry_Barrier return Node_Id is Bnode : Node_Id; begin if Token = Tok_When then Scan; -- past WHEN; Bnode := P_Expression_No_Right_Paren; if Token = Tok_Colon_Equal then Error_Msg_SC -- CODEFIX ("|"":="" should be ""="""); Scan; Bnode := P_Expression_No_Right_Paren; end if; else T_When; -- to give error message Bnode := Error; end if; return Bnode; end P_Entry_Barrier; ----------------------- -- 9.5.2 Entry Body -- ----------------------- -- ENTRY_BODY ::= -- entry DEFINING_IDENTIFIER ENTRY_BODY_FORMAL_PART -- [ASPECT_SPECIFICATIONS] ENTRY_BARRIER -- is -- DECLARATIVE_PART -- begin -- HANDLED_SEQUENCE_OF_STATEMENTS -- end [entry_IDENTIFIER]; -- The caller has checked that the initial token is ENTRY -- Error_Recovery: cannot raise Error_Resync function P_Entry_Body return Node_Id is Dummy_Node : Node_Id; Entry_Node : Node_Id; Formal_Part_Node : Node_Id; Name_Node : Node_Id; begin Push_Scope_Stack; Entry_Node := New_Node (N_Entry_Body, Token_Ptr); Scan; -- past ENTRY Scope.Table (Scope.Last).Ecol := Start_Column; Scope.Table (Scope.Last).Lreq := False; Scope.Table (Scope.Last).Etyp := E_Name; Scope.Table (Scope.Last).Sloc := Token_Ptr; Name_Node := P_Defining_Identifier; Set_Defining_Identifier (Entry_Node, Name_Node); Scope.Table (Scope.Last).Labl := Name_Node; Current_Node := Name_Node; Formal_Part_Node := P_Entry_Body_Formal_Part; Set_Entry_Body_Formal_Part (Entry_Node, Formal_Part_Node); -- Ada 2012 (AI12-0169): Aspect specifications may appear on an entry -- body immediately after the formal part. Do not parse the aspect -- specifications directly because the "when" of the entry barrier may -- be interpreted as a misused "with". if Token = Tok_With then P_Aspect_Specifications (Entry_Node, Semicolon => False); end if; Set_Condition (Formal_Part_Node, P_Entry_Barrier); -- Detect an illegal placement of aspect specifications following the -- entry barrier. -- entry E ... when Barrier with Aspect is if Token = Tok_With then Error_Msg_SC ("aspect specifications must come before entry barrier"); -- Consume the illegal aspects to allow for parsing to continue Dummy_Node := New_Node (N_Entry_Body, Sloc (Entry_Node)); P_Aspect_Specifications (Dummy_Node, Semicolon => False); end if; TF_Is; Parse_Decls_Begin_End (Entry_Node); return Entry_Node; end P_Entry_Body; ----------------------------------- -- 9.5.2 Entry Body Formal Part -- ----------------------------------- -- ENTRY_BODY_FORMAL_PART ::= -- [(ENTRY_INDEX_SPECIFICATION)] [PARAMETER_PART] -- Error_Recovery: cannot raise Error_Resync function P_Entry_Body_Formal_Part return Node_Id is Fpart_Node : Node_Id; Scan_State : Saved_Scan_State; begin Fpart_Node := New_Node (N_Entry_Body_Formal_Part, Token_Ptr); -- See if entry index specification present, and if so parse it if Token = Tok_Left_Paren then Save_Scan_State (Scan_State); -- at left paren Scan; -- past left paren if Token = Tok_For then Set_Entry_Index_Specification (Fpart_Node, P_Entry_Index_Specification); T_Right_Paren; else Restore_Scan_State (Scan_State); -- to left paren end if; -- Check for (common?) case of left paren omitted before FOR. This -- is a tricky case, because the corresponding missing left paren -- can cause real havoc if a formal part is present which gets -- treated as part of the discrete subtype definition of the -- entry index specification, so just give error and resynchronize elsif Token = Tok_For then T_Left_Paren; -- to give error message Resync_To_When; end if; Set_Parameter_Specifications (Fpart_Node, P_Parameter_Profile); return Fpart_Node; end P_Entry_Body_Formal_Part; -------------------------------------- -- 9.5.2 Entry Index Specification -- -------------------------------------- -- ENTRY_INDEX_SPECIFICATION ::= -- for DEFINING_IDENTIFIER in DISCRETE_SUBTYPE_DEFINITION -- Error recovery: can raise Error_Resync function P_Entry_Index_Specification return Node_Id is Iterator_Node : Node_Id; begin Iterator_Node := New_Node (N_Entry_Index_Specification, Token_Ptr); T_For; -- past FOR Set_Defining_Identifier (Iterator_Node, P_Defining_Identifier (C_In)); T_In; Set_Discrete_Subtype_Definition (Iterator_Node, P_Discrete_Subtype_Definition); return Iterator_Node; end P_Entry_Index_Specification; --------------------------------- -- 9.5.3 Entry Call Statement -- --------------------------------- -- Parsed by P_Name (4.1). Within a select, an entry call is parsed -- by P_Select_Statement (9.7) ------------------------------ -- 9.5.4 Requeue Statement -- ------------------------------ -- REQUEUE_STATEMENT ::= requeue entry_NAME [with abort]; -- The caller has checked that the initial token is requeue -- Error recovery: can raise Error_Resync function P_Requeue_Statement return Node_Id is Requeue_Node : Node_Id; begin Requeue_Node := New_Node (N_Requeue_Statement, Token_Ptr); Scan; -- past REQUEUE Set_Name (Requeue_Node, P_Name); if Token = Tok_With then Scan; -- past WITH T_Abort; Set_Abort_Present (Requeue_Node, True); end if; TF_Semicolon; return Requeue_Node; end P_Requeue_Statement; -------------------------- -- 9.6 Delay Statement -- -------------------------- -- DELAY_STATEMENT ::= -- DELAY_UNTIL_STATEMENT -- | DELAY_RELATIVE_STATEMENT -- The caller has checked that the initial token is DELAY -- Error recovery: cannot raise Error_Resync function P_Delay_Statement return Node_Id is begin Scan; -- past DELAY -- The following check for delay until misused in Ada 83 doesn't catch -- all cases, but it's good enough to catch most of them. if Token_Name = Name_Until then Check_95_Keyword (Tok_Until, Tok_Left_Paren); Check_95_Keyword (Tok_Until, Tok_Identifier); end if; if Token = Tok_Until then return P_Delay_Until_Statement; else return P_Delay_Relative_Statement; end if; end P_Delay_Statement; -------------------------------- -- 9.6 Delay Until Statement -- -------------------------------- -- DELAY_UNTIL_STATEMENT ::= delay until delay_EXPRESSION; -- The caller has checked that the initial token is DELAY, scanned it -- out and checked that the current token is UNTIL -- Error recovery: cannot raise Error_Resync function P_Delay_Until_Statement return Node_Id is Delay_Node : Node_Id; begin Delay_Node := New_Node (N_Delay_Until_Statement, Prev_Token_Ptr); Scan; -- past UNTIL Set_Expression (Delay_Node, P_Expression_No_Right_Paren); TF_Semicolon; return Delay_Node; end P_Delay_Until_Statement; ----------------------------------- -- 9.6 Delay Relative Statement -- ----------------------------------- -- DELAY_RELATIVE_STATEMENT ::= delay delay_EXPRESSION; -- The caller has checked that the initial token is DELAY, scanned it -- out and determined that the current token is not UNTIL -- Error recovery: cannot raise Error_Resync function P_Delay_Relative_Statement return Node_Id is Delay_Node : Node_Id; begin Delay_Node := New_Node (N_Delay_Relative_Statement, Prev_Token_Ptr); Set_Expression (Delay_Node, P_Expression_No_Right_Paren); Check_Simple_Expression_In_Ada_83 (Expression (Delay_Node)); TF_Semicolon; return Delay_Node; end P_Delay_Relative_Statement; --------------------------- -- 9.7 Select Statement -- --------------------------- -- SELECT_STATEMENT ::= -- SELECTIVE_ACCEPT -- | TIMED_ENTRY_CALL -- | CONDITIONAL_ENTRY_CALL -- | ASYNCHRONOUS_SELECT -- SELECTIVE_ACCEPT ::= -- select -- [GUARD] -- SELECT_ALTERNATIVE -- {or -- [GUARD] -- SELECT_ALTERNATIVE -- [else -- SEQUENCE_OF_STATEMENTS] -- end select; -- GUARD ::= when CONDITION => -- Note: the guard preceding a select alternative is included as part -- of the node generated for a selective accept alternative. -- SELECT_ALTERNATIVE ::= -- ACCEPT_ALTERNATIVE -- | DELAY_ALTERNATIVE -- | TERMINATE_ALTERNATIVE -- TIMED_ENTRY_CALL ::= -- select -- ENTRY_CALL_ALTERNATIVE -- or -- DELAY_ALTERNATIVE -- end select; -- CONDITIONAL_ENTRY_CALL ::= -- select -- ENTRY_CALL_ALTERNATIVE -- else -- SEQUENCE_OF_STATEMENTS -- end select; -- ENTRY_CALL_ALTERNATIVE ::= -- ENTRY_CALL_STATEMENT [SEQUENCE_OF_STATEMENTS] -- ASYNCHRONOUS_SELECT ::= -- select -- TRIGGERING_ALTERNATIVE -- then abort -- ABORTABLE_PART -- end select; -- TRIGGERING_ALTERNATIVE ::= -- TRIGGERING_STATEMENT [SEQUENCE_OF_STATEMENTS] -- TRIGGERING_STATEMENT ::= ENTRY_CALL_STATEMENT | DELAY_STATEMENT -- The caller has checked that the initial token is SELECT -- Error recovery: can raise Error_Resync function P_Select_Statement return Node_Id is Select_Node : Node_Id; Select_Sloc : Source_Ptr; Stmnt_Sloc : Source_Ptr; Ecall_Node : Node_Id; Alternative : Node_Id; Select_Pragmas : List_Id; Alt_Pragmas : List_Id; Statement_List : List_Id; Alt_List : List_Id; Cond_Expr : Node_Id; Delay_Stmnt : Node_Id; begin Push_Scope_Stack; Scope.Table (Scope.Last).Etyp := E_Select; Scope.Table (Scope.Last).Ecol := Start_Column; Scope.Table (Scope.Last).Sloc := Token_Ptr; Scope.Table (Scope.Last).Labl := Error; Select_Sloc := Token_Ptr; Scan; -- past SELECT Stmnt_Sloc := Token_Ptr; Select_Pragmas := P_Pragmas_Opt; -- If first token after select is designator, then we have an entry -- call, which must be the start of a conditional entry call, timed -- entry call or asynchronous select if Token in Token_Class_Desig then -- Scan entry call statement begin Ecall_Node := P_Name; -- ?? The following two clauses exactly parallel code in ch5 -- and should be combined sometime if Nkind (Ecall_Node) = N_Indexed_Component then declare Prefix_Node : constant Node_Id := Prefix (Ecall_Node); Exprs_Node : constant List_Id := Expressions (Ecall_Node); begin Change_Node (Ecall_Node, N_Procedure_Call_Statement); Set_Name (Ecall_Node, Prefix_Node); Set_Parameter_Associations (Ecall_Node, Exprs_Node); end; elsif Nkind (Ecall_Node) = N_Function_Call then declare Fname_Node : constant Node_Id := Name (Ecall_Node); Params_List : constant List_Id := Parameter_Associations (Ecall_Node); begin Change_Node (Ecall_Node, N_Procedure_Call_Statement); Set_Name (Ecall_Node, Fname_Node); Set_Parameter_Associations (Ecall_Node, Params_List); end; elsif Nkind (Ecall_Node) = N_Identifier or else Nkind (Ecall_Node) = N_Selected_Component then -- Case of a call to a parameterless entry declare C_Node : constant Node_Id := New_Node (N_Procedure_Call_Statement, Stmnt_Sloc); begin Set_Name (C_Node, Ecall_Node); Set_Parameter_Associations (C_Node, No_List); Ecall_Node := C_Node; end; end if; TF_Semicolon; exception when Error_Resync => Resync_Past_Semicolon; return Error; end; Statement_List := P_Sequence_Of_Statements (SS_Eltm_Ortm_Tatm); -- OR follows, we have a timed entry call if Token = Tok_Or then Scan; -- past OR Alt_Pragmas := P_Pragmas_Opt; Select_Node := New_Node (N_Timed_Entry_Call, Select_Sloc); Set_Entry_Call_Alternative (Select_Node, Make_Entry_Call_Alternative (Stmnt_Sloc, Entry_Call_Statement => Ecall_Node, Pragmas_Before => Select_Pragmas, Statements => Statement_List)); -- Only possibility is delay alternative. If we have anything -- else, give message, and treat as conditional entry call. if Token /= Tok_Delay then Error_Msg_SC ("only allowed alternative in timed entry call is delay!"); Discard_Junk_List (P_Sequence_Of_Statements (SS_Sreq)); Set_Delay_Alternative (Select_Node, Error); else Set_Delay_Alternative (Select_Node, P_Delay_Alternative); Set_Pragmas_Before (Delay_Alternative (Select_Node), Alt_Pragmas); end if; -- ELSE follows, we have a conditional entry call elsif Token = Tok_Else then Scan; -- past ELSE Select_Node := New_Node (N_Conditional_Entry_Call, Select_Sloc); Set_Entry_Call_Alternative (Select_Node, Make_Entry_Call_Alternative (Stmnt_Sloc, Entry_Call_Statement => Ecall_Node, Pragmas_Before => Select_Pragmas, Statements => Statement_List)); Set_Else_Statements (Select_Node, P_Sequence_Of_Statements (SS_Sreq)); -- Only remaining case is THEN ABORT (asynchronous select) elsif Token = Tok_Abort then Select_Node := Make_Asynchronous_Select (Select_Sloc, Triggering_Alternative => Make_Triggering_Alternative (Stmnt_Sloc, Triggering_Statement => Ecall_Node, Pragmas_Before => Select_Pragmas, Statements => Statement_List), Abortable_Part => P_Abortable_Part); -- Else error else if Ada_Version = Ada_83 then Error_Msg_BC ("OR or ELSE expected"); else Error_Msg_BC ("OR or ELSE or THEN ABORT expected"); end if; Select_Node := Error; end if; End_Statements; -- Here we have a selective accept or an asynchronous select (first -- token after SELECT is other than a designator token). else -- If we have delay with no guard, could be asynchronous select if Token = Tok_Delay then Delay_Stmnt := P_Delay_Statement; Statement_List := P_Sequence_Of_Statements (SS_Eltm_Ortm_Tatm); -- Asynchronous select if Token = Tok_Abort then Select_Node := Make_Asynchronous_Select (Select_Sloc, Triggering_Alternative => Make_Triggering_Alternative (Stmnt_Sloc, Triggering_Statement => Delay_Stmnt, Pragmas_Before => Select_Pragmas, Statements => Statement_List), Abortable_Part => P_Abortable_Part); End_Statements; return Select_Node; -- Delay which was not an asynchronous select. Must be a selective -- accept, and since at least one accept statement is required, -- we must have at least one OR phrase present. else Alt_List := New_List ( Make_Delay_Alternative (Stmnt_Sloc, Delay_Statement => Delay_Stmnt, Pragmas_Before => Select_Pragmas, Statements => Statement_List)); T_Or; Alt_Pragmas := P_Pragmas_Opt; end if; -- If not a delay statement, then must be another possibility for -- a selective accept alternative, or perhaps a guard is present else Alt_List := New_List; Alt_Pragmas := Select_Pragmas; end if; Select_Node := New_Node (N_Selective_Accept, Select_Sloc); Set_Select_Alternatives (Select_Node, Alt_List); -- Scan out selective accept alternatives. On entry to this loop, -- we are just past a SELECT or OR token, and any pragmas that -- immediately follow the SELECT or OR are in Alt_Pragmas. loop if Token = Tok_When then if Present (Alt_Pragmas) then Error_Msg_SC ("pragmas may not precede guard"); end if; Scan; -- past WHEN Cond_Expr := P_Expression_No_Right_Paren; T_Arrow; Alt_Pragmas := P_Pragmas_Opt; else Cond_Expr := Empty; end if; if Token = Tok_Accept then Alternative := P_Accept_Alternative; -- Check for junk attempt at asynchronous select using -- an Accept alternative as the triggering statement if Token = Tok_Abort and then Is_Empty_List (Alt_List) and then No (Cond_Expr) then Error_Msg ("triggering statement must be entry call or delay", Sloc (Alternative)); Scan; -- past junk ABORT Discard_Junk_List (P_Sequence_Of_Statements (SS_Sreq)); End_Statements; return Error; end if; elsif Token = Tok_Delay then Alternative := P_Delay_Alternative; elsif Token = Tok_Terminate then Alternative := P_Terminate_Alternative; else Error_Msg_SC ("select alternative (ACCEPT, ABORT, DELAY) expected"); Alternative := Error; if Token = Tok_Semicolon then Scan; -- past junk semicolon end if; end if; -- THEN ABORT at this stage is just junk if Token = Tok_Abort then Error_Msg_SP ("misplaced `THEN ABORT`"); Scan; -- past junk ABORT Discard_Junk_List (P_Sequence_Of_Statements (SS_Sreq)); End_Statements; return Error; else if Alternative /= Error then Set_Condition (Alternative, Cond_Expr); Set_Pragmas_Before (Alternative, Alt_Pragmas); Append (Alternative, Alt_List); end if; exit when Token /= Tok_Or; end if; T_Or; Alt_Pragmas := P_Pragmas_Opt; end loop; if Token = Tok_Else then Scan; -- past ELSE Set_Else_Statements (Select_Node, P_Sequence_Of_Statements (SS_Ortm_Sreq)); if Token = Tok_Or then Error_Msg_SC ("select alternative cannot follow else part!"); end if; end if; End_Statements; end if; return Select_Node; end P_Select_Statement; ----------------------------- -- 9.7.1 Selective Accept -- ----------------------------- -- Parsed by P_Select_Statement (9.7) ------------------ -- 9.7.1 Guard -- ------------------ -- Parsed by P_Select_Statement (9.7) ------------------------------- -- 9.7.1 Select Alternative -- ------------------------------- -- SELECT_ALTERNATIVE ::= -- ACCEPT_ALTERNATIVE -- | DELAY_ALTERNATIVE -- | TERMINATE_ALTERNATIVE -- Note: the guard preceding a select alternative is included as part -- of the node generated for a selective accept alternative. -- Error recovery: cannot raise Error_Resync ------------------------------- -- 9.7.1 Accept Alternative -- ------------------------------- -- ACCEPT_ALTERNATIVE ::= -- ACCEPT_STATEMENT [SEQUENCE_OF_STATEMENTS] -- Error_Recovery: Cannot raise Error_Resync -- Note: the caller is responsible for setting the Pragmas_Before -- field of the returned N_Terminate_Alternative node. function P_Accept_Alternative return Node_Id is Accept_Alt_Node : Node_Id; begin Accept_Alt_Node := New_Node (N_Accept_Alternative, Token_Ptr); Set_Accept_Statement (Accept_Alt_Node, P_Accept_Statement); -- Note: the reason that we accept THEN ABORT as a terminator for -- the sequence of statements is for error recovery which allows -- for misuse of an accept statement as a triggering statement. Set_Statements (Accept_Alt_Node, P_Sequence_Of_Statements (SS_Eltm_Ortm_Tatm)); return Accept_Alt_Node; end P_Accept_Alternative; ------------------------------ -- 9.7.1 Delay Alternative -- ------------------------------ -- DELAY_ALTERNATIVE ::= -- DELAY_STATEMENT [SEQUENCE_OF_STATEMENTS] -- Error_Recovery: Cannot raise Error_Resync -- Note: the caller is responsible for setting the Pragmas_Before -- field of the returned N_Terminate_Alternative node. function P_Delay_Alternative return Node_Id is Delay_Alt_Node : Node_Id; begin Delay_Alt_Node := New_Node (N_Delay_Alternative, Token_Ptr); Set_Delay_Statement (Delay_Alt_Node, P_Delay_Statement); -- Note: the reason that we accept THEN ABORT as a terminator for -- the sequence of statements is for error recovery which allows -- for misuse of an accept statement as a triggering statement. Set_Statements (Delay_Alt_Node, P_Sequence_Of_Statements (SS_Eltm_Ortm_Tatm)); return Delay_Alt_Node; end P_Delay_Alternative; ---------------------------------- -- 9.7.1 Terminate Alternative -- ---------------------------------- -- TERMINATE_ALTERNATIVE ::= terminate; -- Error_Recovery: Cannot raise Error_Resync -- Note: the caller is responsible for setting the Pragmas_Before -- field of the returned N_Terminate_Alternative node. function P_Terminate_Alternative return Node_Id is Terminate_Alt_Node : Node_Id; begin Terminate_Alt_Node := New_Node (N_Terminate_Alternative, Token_Ptr); Scan; -- past TERMINATE TF_Semicolon; -- For all other select alternatives, the sequence of statements -- after the alternative statement will swallow up any pragmas -- coming in this position. But the terminate alternative has no -- sequence of statements, so the pragmas here must be treated -- specially. Set_Pragmas_After (Terminate_Alt_Node, P_Pragmas_Opt); return Terminate_Alt_Node; end P_Terminate_Alternative; ----------------------------- -- 9.7.2 Timed Entry Call -- ----------------------------- -- Parsed by P_Select_Statement (9.7) ----------------------------------- -- 9.7.2 Entry Call Alternative -- ----------------------------------- -- Parsed by P_Select_Statement (9.7) ----------------------------------- -- 9.7.3 Conditional Entry Call -- ----------------------------------- -- Parsed by P_Select_Statement (9.7) -------------------------------- -- 9.7.4 Asynchronous Select -- -------------------------------- -- Parsed by P_Select_Statement (9.7) ----------------------------------- -- 9.7.4 Triggering Alternative -- ----------------------------------- -- Parsed by P_Select_Statement (9.7) --------------------------------- -- 9.7.4 Triggering Statement -- --------------------------------- -- Parsed by P_Select_Statement (9.7) --------------------------- -- 9.7.4 Abortable Part -- --------------------------- -- ABORTABLE_PART ::= SEQUENCE_OF_STATEMENTS -- The caller has verified that THEN ABORT is present, and Token is -- pointing to the ABORT on entry (or if not, then we have an error) -- Error recovery: cannot raise Error_Resync function P_Abortable_Part return Node_Id is Abortable_Part_Node : Node_Id; begin Abortable_Part_Node := New_Node (N_Abortable_Part, Token_Ptr); T_Abort; -- scan past ABORT if Ada_Version = Ada_83 then Error_Msg_SP ("(Ada 83) asynchronous select not allowed!"); end if; Set_Statements (Abortable_Part_Node, P_Sequence_Of_Statements (SS_Sreq)); return Abortable_Part_Node; end P_Abortable_Part; -------------------------- -- 9.8 Abort Statement -- -------------------------- -- ABORT_STATEMENT ::= abort task_NAME {, task_NAME}; -- The caller has checked that the initial token is ABORT -- Error recovery: cannot raise Error_Resync function P_Abort_Statement return Node_Id is Abort_Node : Node_Id; begin Abort_Node := New_Node (N_Abort_Statement, Token_Ptr); Scan; -- past ABORT Set_Names (Abort_Node, New_List); loop Append (P_Name, Names (Abort_Node)); exit when Token /= Tok_Comma; Scan; -- past comma end loop; TF_Semicolon; return Abort_Node; end P_Abort_Statement; end Ch9;