# Makefile.in generated by automake 1.10.1 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Makefile.am for texinfo. # $Id: Makefile.am,v 1.25 2008/07/05 13:37:39 karl Exp $ # Process this file with automake to produce Makefile.in in all directories. # # This file is free software; as a special exception the author gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY, to the extent permitted by law; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. VPATH = ./.. pkgdatadir = $(datadir)/texinfo pkglibdir = $(libdir)/texinfo pkgincludedir = $(includedir)/texinfo am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i786-pc-msdosdjgpp host_triplet = i786-pc-msdosdjgpp subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.in \ $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \ INSTALL NEWS TODO build-aux/compile build-aux/config.guess \ build-aux/config.rpath build-aux/config.sub build-aux/depcomp \ build-aux/install-sh build-aux/mdate-sh build-aux/missing \ build-aux/texinfo.tex ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/gnulib/m4/alloca.m4 \ $(top_srcdir)/gnulib/m4/argz.m4 \ $(top_srcdir)/gnulib/m4/codeset.m4 \ $(top_srcdir)/gnulib/m4/eealloc.m4 \ $(top_srcdir)/gnulib/m4/environ.m4 \ $(top_srcdir)/gnulib/m4/error.m4 \ $(top_srcdir)/gnulib/m4/exitfail.m4 \ $(top_srcdir)/gnulib/m4/extensions.m4 \ $(top_srcdir)/gnulib/m4/getopt.m4 \ $(top_srcdir)/gnulib/m4/gettext.m4 \ $(top_srcdir)/gnulib/m4/gettimeofday.m4 \ $(top_srcdir)/gnulib/m4/glibc21.m4 \ $(top_srcdir)/gnulib/m4/gnulib-common.m4 \ $(top_srcdir)/gnulib/m4/gnulib-comp.m4 \ $(top_srcdir)/gnulib/m4/iconv.m4 \ $(top_srcdir)/gnulib/m4/include_next.m4 \ $(top_srcdir)/gnulib/m4/inline.m4 \ $(top_srcdir)/gnulib/m4/intlmacosx.m4 \ $(top_srcdir)/gnulib/m4/lib-ld.m4 \ $(top_srcdir)/gnulib/m4/lib-link.m4 \ $(top_srcdir)/gnulib/m4/lib-prefix.m4 \ $(top_srcdir)/gnulib/m4/localcharset.m4 \ $(top_srcdir)/gnulib/m4/longlong.m4 \ $(top_srcdir)/gnulib/m4/malloc.m4 \ $(top_srcdir)/gnulib/m4/malloca.m4 \ $(top_srcdir)/gnulib/m4/mbchar.m4 \ $(top_srcdir)/gnulib/m4/mbiter.m4 \ $(top_srcdir)/gnulib/m4/mbrtowc.m4 \ $(top_srcdir)/gnulib/m4/mbscasecmp.m4 \ $(top_srcdir)/gnulib/m4/mbschr.m4 \ $(top_srcdir)/gnulib/m4/mbslen.m4 \ $(top_srcdir)/gnulib/m4/mbsncasecmp.m4 \ $(top_srcdir)/gnulib/m4/mbsstr.m4 \ $(top_srcdir)/gnulib/m4/mbstate_t.m4 \ $(top_srcdir)/gnulib/m4/mbswidth.m4 \ $(top_srcdir)/gnulib/m4/memchr.m4 \ $(top_srcdir)/gnulib/m4/memcmp.m4 \ $(top_srcdir)/gnulib/m4/memcpy.m4 \ $(top_srcdir)/gnulib/m4/memmem.m4 \ $(top_srcdir)/gnulib/m4/memmove.m4 \ $(top_srcdir)/gnulib/m4/mempcpy.m4 \ $(top_srcdir)/gnulib/m4/mkstemp.m4 \ $(top_srcdir)/gnulib/m4/nls.m4 \ $(top_srcdir)/gnulib/m4/onceonly.m4 \ $(top_srcdir)/gnulib/m4/po.m4 \ $(top_srcdir)/gnulib/m4/progtest.m4 \ $(top_srcdir)/gnulib/m4/setenv.m4 \ $(top_srcdir)/gnulib/m4/stdbool.m4 \ $(top_srcdir)/gnulib/m4/stdint.m4 \ $(top_srcdir)/gnulib/m4/stdlib_h.m4 \ $(top_srcdir)/gnulib/m4/stpcpy.m4 \ $(top_srcdir)/gnulib/m4/strdup.m4 \ $(top_srcdir)/gnulib/m4/strerror.m4 \ $(top_srcdir)/gnulib/m4/string_h.m4 \ $(top_srcdir)/gnulib/m4/strndup.m4 \ $(top_srcdir)/gnulib/m4/strnlen.m4 \ $(top_srcdir)/gnulib/m4/sys_stat_h.m4 \ $(top_srcdir)/gnulib/m4/sys_time_h.m4 \ $(top_srcdir)/gnulib/m4/tempname.m4 \ $(top_srcdir)/gnulib/m4/unistd_h.m4 \ $(top_srcdir)/gnulib/m4/wchar.m4 \ $(top_srcdir)/gnulib/m4/wchar_t.m4 \ $(top_srcdir)/gnulib/m4/wctype.m4 \ $(top_srcdir)/gnulib/m4/wcwidth.m4 \ $(top_srcdir)/gnulib/m4/wint_t.m4 \ $(top_srcdir)/gnulib/m4/xalloc.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = gnulib/lib lib install-info info \ makeinfo po util doc DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.lzma GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} ${top_srcdir}/build-aux/missing --run aclocal-1.10 ALLOCA = ALLOCA_H = alloca.h AMTAR = ${SHELL} ${top_srcdir}/build-aux/missing --run tar ARGZ_H = argz.h AUTOCONF = ${SHELL} ${top_srcdir}/build-aux/missing --run autoconf AUTOHEADER = ${SHELL} ${top_srcdir}/build-aux/missing --run autoheader AUTOMAKE = ${SHELL} ${top_srcdir}/build-aux/missing --run automake-1.10 AWK = gawk BITSIZEOF_PTRDIFF_T = BITSIZEOF_SIG_ATOMIC_T = BITSIZEOF_SIZE_T = BITSIZEOF_WCHAR_T = BITSIZEOF_WINT_T = CC = gcc CCDEPMODE = depmode=none CFLAGS = -g -O2 CPP = gcc -E CPPFLAGS = CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = _deps ECHO_C = ECHO_N = -n ECHO_T = EGREP = /dev/env/DJDIR/bin/egrep EXEEXT = .exe GETOPT_H = getopt.h GETTEXT_MACRO_VERSION = 0.17 GLIBC21 = no GMSGFMT = /dev/env/DJDIR/bin/msgfmt GMSGFMT_015 = : GNULIB_CALLOC_POSIX = 0 GNULIB_CHOWN = 0 GNULIB_DUP2 = 0 GNULIB_ENVIRON = 1 GNULIB_FCHDIR = 0 GNULIB_FTRUNCATE = 0 GNULIB_GETCWD = 0 GNULIB_GETLOGIN_R = 0 GNULIB_GETPAGESIZE = 0 GNULIB_GETSUBOPT = 0 GNULIB_LCHOWN = 0 GNULIB_LSEEK = 0 GNULIB_MALLOC_POSIX = 1 GNULIB_MBSCASECMP = 1 GNULIB_MBSCASESTR = 0 GNULIB_MBSCHR = 1 GNULIB_MBSCSPN = 0 GNULIB_MBSLEN = 1 GNULIB_MBSNCASECMP = 1 GNULIB_MBSNLEN = 0 GNULIB_MBSPBRK = 0 GNULIB_MBSPCASECMP = 0 GNULIB_MBSRCHR = 0 GNULIB_MBSSEP = 0 GNULIB_MBSSPN = 0 GNULIB_MBSSTR = 1 GNULIB_MBSTOK_R = 0 GNULIB_MEMMEM = 1 GNULIB_MEMPCPY = 1 GNULIB_MEMRCHR = 0 GNULIB_MKDTEMP = 0 GNULIB_MKSTEMP = 1 GNULIB_PUTENV = 0 GNULIB_RAWMEMCHR = 0 GNULIB_READLINK = 0 GNULIB_REALLOC_POSIX = 0 GNULIB_RPMATCH = 0 GNULIB_SETENV = 1 GNULIB_SLEEP = 0 GNULIB_STPCPY = 1 GNULIB_STPNCPY = 0 GNULIB_STRCASESTR = 0 GNULIB_STRCHRNUL = 0 GNULIB_STRDUP = 1 GNULIB_STRERROR = 1 GNULIB_STRNDUP = 1 GNULIB_STRNLEN = 1 GNULIB_STRPBRK = 0 GNULIB_STRSEP = 0 GNULIB_STRSIGNAL = 0 GNULIB_STRSTR = 0 GNULIB_STRTOD = 0 GNULIB_STRTOK_R = 0 GNULIB_UNSETENV = 1 GNULIB_WCWIDTH = 1 GREP = /dev/env/DJDIR/bin/grep HAVE_CALLOC_POSIX = 1 HAVE_DECL_ENVIRON = 0 HAVE_DECL_GETLOGIN_R = 1 HAVE_DECL_MEMMEM = 0 HAVE_DECL_MEMRCHR = 1 HAVE_DECL_STRDUP = 1 HAVE_DECL_STRERROR = 1 HAVE_DECL_STRNDUP = 1 HAVE_DECL_STRNLEN = 1 HAVE_DECL_STRSIGNAL = 1 HAVE_DECL_STRTOK_R = 1 HAVE_DECL_WCWIDTH = 0 HAVE_DUP2 = 1 HAVE_FTRUNCATE = 1 HAVE_GETPAGESIZE = 1 HAVE_GETSUBOPT = 1 HAVE_INTTYPES_H = 1 HAVE_ISWCNTRL = 0 HAVE_LONG_LONG_INT = 1 HAVE_LSTAT = 1 HAVE_MALLOC_POSIX = 1 HAVE_MEMPCPY = 0 HAVE_MKDTEMP = 1 HAVE_OS_H = 0 HAVE_RAWMEMCHR = 1 HAVE_READLINK = 1 HAVE_REALLOC_POSIX = 1 HAVE_RPMATCH = 1 HAVE_SETENV = 1 HAVE_SIGNED_SIG_ATOMIC_T = HAVE_SIGNED_WCHAR_T = HAVE_SIGNED_WINT_T = HAVE_SLEEP = 1 HAVE_STDINT_H = 1 HAVE_STPCPY = 1 HAVE_STPNCPY = 1 HAVE_STRCASESTR = 1 HAVE_STRCHRNUL = 1 HAVE_STRNDUP = 1 HAVE_STRPBRK = 1 HAVE_STRSEP = 1 HAVE_STRTOD = 1 HAVE_STRUCT_TIMEVAL = 1 HAVE_SYS_BITYPES_H = HAVE_SYS_INTTYPES_H = HAVE_SYS_PARAM_H = 0 HAVE_SYS_TIME_H = 1 HAVE_SYS_TYPES_H = 1 HAVE_UNISTD_H = 1 HAVE_UNSETENV = 1 HAVE_UNSIGNED_LONG_LONG_INT = 1 HAVE_WCHAR_H = 1 HAVE_WCTYPE_H = 1 HAVE_WINT_T = 1 HAVE__BOOL = 1 HELP2MAN = ${SHELL} ${top_srcdir}/build-aux/missing --run help2man HEVEA = INCLUDE_NEXT = include_next INSTALL = /dev/env/DJDIR/bin/ginstall -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s INTLLIBS = INTL_MACOSX_LIBS = LDFLAGS = LIBGNU_LIBDEPS = LIBGNU_LTLIBDEPS = LIBICONV = -liconv LIBINTL = LIBOBJS = LIBS = LOCALCHARSET_TESTS_ENVIRONMENT = CHARSETALIASDIR="$(top_builddir)/gnulib/lib" LTLIBICONV = -liconv LTLIBINTL = LTLIBOBJS = MAINT = # MAKEINFO = makeinfo MKDIR_P = /dev/env/DJDIR/bin/mkdir -p MSGFMT = /dev/env/DJDIR/bin/msgfmt MSGFMT_015 = : MSGMERGE = : NEXT_STDINT_H = NEXT_STDLIB_H = NEXT_STRING_H = NEXT_SYS_STAT_H = NEXT_SYS_TIME_H = NEXT_UNISTD_H = NEXT_WCHAR_H = NEXT_WCTYPE_H = OBJEXT = o PACKAGE = texinfo PACKAGE_BUGREPORT = bug-texinfo@gnu.org PACKAGE_NAME = GNU Texinfo PACKAGE_STRING = GNU Texinfo 4.13 PACKAGE_TARNAME = texinfo PACKAGE_VERSION = 4.13 PATH_SEPARATOR = : POSUB = PTRDIFF_T_SUFFIX = RANLIB = ranlib REPLACE_CHOWN = 0 REPLACE_FCHDIR = 0 REPLACE_GETCWD = 0 REPLACE_GETPAGESIZE = 0 REPLACE_GETTIMEOFDAY = 0 REPLACE_ISWCNTRL = 0 REPLACE_LCHOWN = 0 REPLACE_LSEEK = 0 REPLACE_MEMMEM = 0 REPLACE_MKDIR = 0 REPLACE_MKSTEMP = 0 REPLACE_PUTENV = 0 REPLACE_STRCASESTR = 0 REPLACE_STRERROR = 0 REPLACE_STRSIGNAL = 0 REPLACE_STRSTR = 0 REPLACE_STRTOD = 0 REPLACE_WCWIDTH = 1 SET_MAKE = SHELL = /bin/sh SIG_ATOMIC_T_SUFFIX = SIZE_T_SUFFIX = STDBOOL_H = STDINT_H = STRIP = SYS_STAT_H = sys/stat.h SYS_TIME_H = TERMLIBS = TEX = tex USE_NLS = no VERSION = 4.13 VOID_UNSETENV = 0 WCHAR_H = wchar.h WCHAR_T_SUFFIX = WCTYPE_H = wctype.h WINT_T_SUFFIX = XGETTEXT = /dev/env/DJDIR/bin/xgettext XGETTEXT_015 = : XGETTEXT_EXTRA_OPTIONS = --flag=error:3:c-format --flag=error_at_line:5:c-format abs_builddir = ../.././_build.205 abs_srcdir = ../../../_build.205/./.. abs_top_builddir = ../../../_build.205 abs_top_srcdir = ../../../_build.205/./.. ac_ct_CC = am__include = include am__leading_dot = _ am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = i786-pc-msdosdjgpp build_alias = build_cpu = i786 build_os = msdosdjgpp build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} gl_LIBOBJS = argz.o error.o exitfail.o getopt.o getopt1.o memmem.o mempcpy.o tempname.o wcwidth.o xmalloc.o libsupp_towlower.o libsupp_towupper.o libsupp_mblen.o libsupp_mbrtowc.o libsupp_mbsinit.o libsupp_mbtowc.o gl_LTLIBOBJS = argz.lo error.lo exitfail.lo getopt.lo getopt1.lo memmem.lo mempcpy.lo tempname.lo wcwidth.lo xmalloc.lo libsupp_towlower.lo libsupp_towupper.lo libsupp_mblen.lo libsupp_mbrtowc.lo libsupp_mbsinit.lo libsupp_mbtowc.lo gltests_LIBOBJS = gltests_LTLIBOBJS = host = i786-pc-msdosdjgpp host_alias = host_cpu = i786 host_os = msdosdjgpp host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = $(SHELL) ${top_srcdir}/build-aux/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /dev/env/DJDIR/bin/mkdir -p native_tools = oldincludedir = /usr/include pdfdir = ${docdir} prefix = /dev/env/DJDIR program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = ./.. sysconfdir = ${prefix}/etc target_alias = top_build_prefix = top_builddir = . top_srcdir = ./.. # Find our headers and gnulib headers. ACLOCAL_AMFLAGS = -I gnulib/m4 # Additional files to distribute. EXTRA_DIST = ChangeLog.46 INSTALL.generic INTRODUCTION README.dev system.h \ djgpp/README djgpp/config.bat djgpp/config.sed djgpp/config.site \ gnulib/m4/gnulib-cache.m4 # This is to prevent texinfo.tex from being included in the top-level # distribution directory. TEXINFO_TEX = doc/texinfo.tex SUBDIRS = $(native_tools) gnulib/lib lib \ install-info info makeinfo po util doc #SUBDIRS = lib info install-info makeinfo util all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: # $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.in: # $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d $(distdir) || mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr distclean-local \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-exec-am: install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-generic \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-local distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am # # Build native tools only. # All subdirectories. # Do libs first since the C programs depend on it. # Do doc last so makeinfo will be built when we get there. # Others are alphabetical. # One special target for installers to use by hand if desired. install-tex: cd doc && $(MAKE) TEXMF=$(TEXMF) install-tex distclean-local: -test -d "$(native_tools)" && rm -rf "$(native_tools)" # Don't install native tools for cross compile. #install: # From coreutils. # Verify that all source files using _() are listed in po/POTFILES.in. # Run this before making pretests, as well as official releases, so that # translators will see changed string. po-check: if test -f po/POTFILES.in; then \ grep -E -v '^(#|$$)' po/POTFILES.in \ | grep -v '^src/false\.c$$' | sort > $@-1; \ files=; \ for file in $$($(CVS_LIST_EXCEPT)) `find [a-z]* -name '*.[ch]'`; do \ case $$file in \ djgpp/* | man/*) continue;; \ esac; \ case $$file in \ *.[ch]) \ base=`expr " $$file" : ' \(.*\)\..'`; \ { test -f $$base.l || test -f $$base.y; } && continue;; \ esac; \ files="$$files $$file"; \ done; \ grep -E -l '\b(N?_|gettext *)\([^)"]*("|$$)' $$files \ | sort -u > $@-2; \ diff -u $@-1 $@-2 || exit 1; \ rm -f $@-1 $@-2; \ fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: