# Makefile.in generated by automake 1.10.1 from Makefile.am. # doc/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # $Id: Makefile.am,v 1.40 2008/09/08 13:39:17 karl Exp $ # Makefile.am for texinfo/doc. # Run automake in .. to produce Makefile.in from this. # # This file is free software; as a special exception the author gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY, to the extent permitted by law; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. VPATH = .././../doc pkgdatadir = $(datadir)/texinfo pkglibdir = $(libdir)/texinfo pkgincludedir = $(includedir)/texinfo am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i786-pc-msdosdjgpp host_triplet = i786-pc-msdosdjgpp subdir = doc DIST_COMMON = README $(info_TEXINFOS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/stamp-1 $(srcdir)/stamp-vti \ $(srcdir)/version-stnd.texi $(srcdir)/version.texi texinfo.tex ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/gnulib/m4/alloca.m4 \ $(top_srcdir)/gnulib/m4/argz.m4 \ $(top_srcdir)/gnulib/m4/codeset.m4 \ $(top_srcdir)/gnulib/m4/eealloc.m4 \ $(top_srcdir)/gnulib/m4/environ.m4 \ $(top_srcdir)/gnulib/m4/error.m4 \ $(top_srcdir)/gnulib/m4/exitfail.m4 \ $(top_srcdir)/gnulib/m4/extensions.m4 \ $(top_srcdir)/gnulib/m4/getopt.m4 \ $(top_srcdir)/gnulib/m4/gettext.m4 \ $(top_srcdir)/gnulib/m4/gettimeofday.m4 \ $(top_srcdir)/gnulib/m4/glibc21.m4 \ $(top_srcdir)/gnulib/m4/gnulib-common.m4 \ $(top_srcdir)/gnulib/m4/gnulib-comp.m4 \ $(top_srcdir)/gnulib/m4/iconv.m4 \ $(top_srcdir)/gnulib/m4/include_next.m4 \ $(top_srcdir)/gnulib/m4/inline.m4 \ $(top_srcdir)/gnulib/m4/intlmacosx.m4 \ $(top_srcdir)/gnulib/m4/lib-ld.m4 \ $(top_srcdir)/gnulib/m4/lib-link.m4 \ $(top_srcdir)/gnulib/m4/lib-prefix.m4 \ $(top_srcdir)/gnulib/m4/localcharset.m4 \ $(top_srcdir)/gnulib/m4/longlong.m4 \ $(top_srcdir)/gnulib/m4/malloc.m4 \ $(top_srcdir)/gnulib/m4/malloca.m4 \ $(top_srcdir)/gnulib/m4/mbchar.m4 \ $(top_srcdir)/gnulib/m4/mbiter.m4 \ $(top_srcdir)/gnulib/m4/mbrtowc.m4 \ $(top_srcdir)/gnulib/m4/mbscasecmp.m4 \ $(top_srcdir)/gnulib/m4/mbschr.m4 \ $(top_srcdir)/gnulib/m4/mbslen.m4 \ $(top_srcdir)/gnulib/m4/mbsncasecmp.m4 \ $(top_srcdir)/gnulib/m4/mbsstr.m4 \ $(top_srcdir)/gnulib/m4/mbstate_t.m4 \ $(top_srcdir)/gnulib/m4/mbswidth.m4 \ $(top_srcdir)/gnulib/m4/memchr.m4 \ $(top_srcdir)/gnulib/m4/memcmp.m4 \ $(top_srcdir)/gnulib/m4/memcpy.m4 \ $(top_srcdir)/gnulib/m4/memmem.m4 \ $(top_srcdir)/gnulib/m4/memmove.m4 \ $(top_srcdir)/gnulib/m4/mempcpy.m4 \ $(top_srcdir)/gnulib/m4/mkstemp.m4 \ $(top_srcdir)/gnulib/m4/nls.m4 \ $(top_srcdir)/gnulib/m4/onceonly.m4 \ $(top_srcdir)/gnulib/m4/po.m4 \ $(top_srcdir)/gnulib/m4/progtest.m4 \ $(top_srcdir)/gnulib/m4/setenv.m4 \ $(top_srcdir)/gnulib/m4/stdbool.m4 \ $(top_srcdir)/gnulib/m4/stdint.m4 \ $(top_srcdir)/gnulib/m4/stdlib_h.m4 \ $(top_srcdir)/gnulib/m4/stpcpy.m4 \ $(top_srcdir)/gnulib/m4/strdup.m4 \ $(top_srcdir)/gnulib/m4/strerror.m4 \ $(top_srcdir)/gnulib/m4/string_h.m4 \ $(top_srcdir)/gnulib/m4/strndup.m4 \ $(top_srcdir)/gnulib/m4/strnlen.m4 \ $(top_srcdir)/gnulib/m4/sys_stat_h.m4 \ $(top_srcdir)/gnulib/m4/sys_time_h.m4 \ $(top_srcdir)/gnulib/m4/tempname.m4 \ $(top_srcdir)/gnulib/m4/unistd_h.m4 \ $(top_srcdir)/gnulib/m4/wchar.m4 \ $(top_srcdir)/gnulib/m4/wchar_t.m4 \ $(top_srcdir)/gnulib/m4/wctype.m4 \ $(top_srcdir)/gnulib/m4/wcwidth.m4 \ $(top_srcdir)/gnulib/m4/wint_t.m4 \ $(top_srcdir)/gnulib/m4/xalloc.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = INFO_DEPS = texinfo info-stnd.info info.info TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux DVIS = texinfo.dvi info-stnd.dvi info.dvi PDFS = texinfo.pdf info-stnd.pdf info.pdf PSS = texinfo.ps info-stnd.ps info.ps HTMLS = texinfo.html info-stnd.html info.html TEXINFOS = texinfo.txi info-stnd.texi info.texi TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \ "$(DESTDIR)$(man5dir)" am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; man1dir = $(mandir)/man1 man5dir = $(mandir)/man5 NROFF = nroff MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} ${top_srcdir}/build-aux/missing --run aclocal-1.10 ALLOCA = ALLOCA_H = alloca.h AMTAR = ${SHELL} ${top_srcdir}/build-aux/missing --run tar ARGZ_H = argz.h AUTOCONF = ${SHELL} ${top_srcdir}/build-aux/missing --run autoconf AUTOHEADER = ${SHELL} ${top_srcdir}/build-aux/missing --run autoheader AUTOMAKE = ${SHELL} ${top_srcdir}/build-aux/missing --run automake-1.10 AWK = gawk BITSIZEOF_PTRDIFF_T = BITSIZEOF_SIG_ATOMIC_T = BITSIZEOF_SIZE_T = BITSIZEOF_WCHAR_T = BITSIZEOF_WINT_T = CC = gcc CCDEPMODE = depmode=none CFLAGS = -g -O2 CPP = gcc -E CPPFLAGS = CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = _deps ECHO_C = ECHO_N = -n ECHO_T = EGREP = /dev/env/DJDIR/bin/egrep EXEEXT = .exe GETOPT_H = getopt.h GETTEXT_MACRO_VERSION = 0.17 GLIBC21 = no GMSGFMT = /dev/env/DJDIR/bin/msgfmt GMSGFMT_015 = : GNULIB_CALLOC_POSIX = 0 GNULIB_CHOWN = 0 GNULIB_DUP2 = 0 GNULIB_ENVIRON = 1 GNULIB_FCHDIR = 0 GNULIB_FTRUNCATE = 0 GNULIB_GETCWD = 0 GNULIB_GETLOGIN_R = 0 GNULIB_GETPAGESIZE = 0 GNULIB_GETSUBOPT = 0 GNULIB_LCHOWN = 0 GNULIB_LSEEK = 0 GNULIB_MALLOC_POSIX = 1 GNULIB_MBSCASECMP = 1 GNULIB_MBSCASESTR = 0 GNULIB_MBSCHR = 1 GNULIB_MBSCSPN = 0 GNULIB_MBSLEN = 1 GNULIB_MBSNCASECMP = 1 GNULIB_MBSNLEN = 0 GNULIB_MBSPBRK = 0 GNULIB_MBSPCASECMP = 0 GNULIB_MBSRCHR = 0 GNULIB_MBSSEP = 0 GNULIB_MBSSPN = 0 GNULIB_MBSSTR = 1 GNULIB_MBSTOK_R = 0 GNULIB_MEMMEM = 1 GNULIB_MEMPCPY = 1 GNULIB_MEMRCHR = 0 GNULIB_MKDTEMP = 0 GNULIB_MKSTEMP = 1 GNULIB_PUTENV = 0 GNULIB_RAWMEMCHR = 0 GNULIB_READLINK = 0 GNULIB_REALLOC_POSIX = 0 GNULIB_RPMATCH = 0 GNULIB_SETENV = 1 GNULIB_SLEEP = 0 GNULIB_STPCPY = 1 GNULIB_STPNCPY = 0 GNULIB_STRCASESTR = 0 GNULIB_STRCHRNUL = 0 GNULIB_STRDUP = 1 GNULIB_STRERROR = 1 GNULIB_STRNDUP = 1 GNULIB_STRNLEN = 1 GNULIB_STRPBRK = 0 GNULIB_STRSEP = 0 GNULIB_STRSIGNAL = 0 GNULIB_STRSTR = 0 GNULIB_STRTOD = 0 GNULIB_STRTOK_R = 0 GNULIB_UNSETENV = 1 GNULIB_WCWIDTH = 1 GREP = /dev/env/DJDIR/bin/grep HAVE_CALLOC_POSIX = 1 HAVE_DECL_ENVIRON = 0 HAVE_DECL_GETLOGIN_R = 1 HAVE_DECL_MEMMEM = 0 HAVE_DECL_MEMRCHR = 1 HAVE_DECL_STRDUP = 1 HAVE_DECL_STRERROR = 1 HAVE_DECL_STRNDUP = 1 HAVE_DECL_STRNLEN = 1 HAVE_DECL_STRSIGNAL = 1 HAVE_DECL_STRTOK_R = 1 HAVE_DECL_WCWIDTH = 0 HAVE_DUP2 = 1 HAVE_FTRUNCATE = 1 HAVE_GETPAGESIZE = 1 HAVE_GETSUBOPT = 1 HAVE_INTTYPES_H = 1 HAVE_ISWCNTRL = 0 HAVE_LONG_LONG_INT = 1 HAVE_LSTAT = 1 HAVE_MALLOC_POSIX = 1 HAVE_MEMPCPY = 0 HAVE_MKDTEMP = 1 HAVE_OS_H = 0 HAVE_RAWMEMCHR = 1 HAVE_READLINK = 1 HAVE_REALLOC_POSIX = 1 HAVE_RPMATCH = 1 HAVE_SETENV = 1 HAVE_SIGNED_SIG_ATOMIC_T = HAVE_SIGNED_WCHAR_T = HAVE_SIGNED_WINT_T = HAVE_SLEEP = 1 HAVE_STDINT_H = 1 HAVE_STPCPY = 1 HAVE_STPNCPY = 1 HAVE_STRCASESTR = 1 HAVE_STRCHRNUL = 1 HAVE_STRNDUP = 1 HAVE_STRPBRK = 1 HAVE_STRSEP = 1 HAVE_STRTOD = 1 HAVE_STRUCT_TIMEVAL = 1 HAVE_SYS_BITYPES_H = HAVE_SYS_INTTYPES_H = HAVE_SYS_PARAM_H = 0 HAVE_SYS_TIME_H = 1 HAVE_SYS_TYPES_H = 1 HAVE_UNISTD_H = 1 HAVE_UNSETENV = 1 HAVE_UNSIGNED_LONG_LONG_INT = 1 HAVE_WCHAR_H = 1 HAVE_WCTYPE_H = 1 HAVE_WINT_T = 1 HAVE__BOOL = 1 HELP2MAN = ${SHELL} ${top_srcdir}/build-aux/missing --run help2man HEVEA = INCLUDE_NEXT = include_next INSTALL = /dev/env/DJDIR/bin/ginstall -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s INTLLIBS = INTL_MACOSX_LIBS = LDFLAGS = LIBGNU_LIBDEPS = LIBGNU_LTLIBDEPS = LIBICONV = -liconv LIBINTL = LIBOBJS = LIBS = LOCALCHARSET_TESTS_ENVIRONMENT = CHARSETALIASDIR="$(top_builddir)/gnulib/lib" LTLIBICONV = -liconv LTLIBINTL = LTLIBOBJS = MAINT = # # Use the programs built in our distribution, taking account of possible # cross-compiling. MAKEINFO = $(top_builddir)/$(native_tools)/makeinfo/makeinfo MKDIR_P = /dev/env/DJDIR/bin/mkdir -p MSGFMT = /dev/env/DJDIR/bin/msgfmt MSGFMT_015 = : MSGMERGE = : NEXT_STDINT_H = NEXT_STDLIB_H = NEXT_STRING_H = NEXT_SYS_STAT_H = NEXT_SYS_TIME_H = NEXT_UNISTD_H = NEXT_WCHAR_H = NEXT_WCTYPE_H = OBJEXT = o PACKAGE = texinfo PACKAGE_BUGREPORT = bug-texinfo@gnu.org PACKAGE_NAME = GNU Texinfo PACKAGE_STRING = GNU Texinfo 4.13 PACKAGE_TARNAME = texinfo PACKAGE_VERSION = 4.13 PATH_SEPARATOR = : POSUB = PTRDIFF_T_SUFFIX = RANLIB = ranlib REPLACE_CHOWN = 0 REPLACE_FCHDIR = 0 REPLACE_GETCWD = 0 REPLACE_GETPAGESIZE = 0 REPLACE_GETTIMEOFDAY = 0 REPLACE_ISWCNTRL = 0 REPLACE_LCHOWN = 0 REPLACE_LSEEK = 0 REPLACE_MEMMEM = 0 REPLACE_MKDIR = 0 REPLACE_MKSTEMP = 0 REPLACE_PUTENV = 0 REPLACE_STRCASESTR = 0 REPLACE_STRERROR = 0 REPLACE_STRSIGNAL = 0 REPLACE_STRSTR = 0 REPLACE_STRTOD = 0 REPLACE_WCWIDTH = 1 SET_MAKE = SHELL = /bin/sh SIG_ATOMIC_T_SUFFIX = SIZE_T_SUFFIX = STDBOOL_H = STDINT_H = STRIP = SYS_STAT_H = sys/stat.h SYS_TIME_H = TERMLIBS = TEX = tex USE_NLS = no VERSION = 4.13 VOID_UNSETENV = 0 WCHAR_H = wchar.h WCHAR_T_SUFFIX = WCTYPE_H = wctype.h WINT_T_SUFFIX = XGETTEXT = /dev/env/DJDIR/bin/xgettext XGETTEXT_015 = : XGETTEXT_EXTRA_OPTIONS = --flag=error:3:c-format --flag=error_at_line:5:c-format abs_builddir = ../.././_build.205/doc abs_srcdir = ../../../_build.205/./../doc abs_top_builddir = ../../../_build.205 abs_top_srcdir = ../../../_build.205/./.. ac_ct_CC = am__include = include am__leading_dot = _ am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = i786-pc-msdosdjgpp build_alias = build_cpu = i786 build_os = msdosdjgpp build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} gl_LIBOBJS = argz.o error.o exitfail.o getopt.o getopt1.o memmem.o mempcpy.o tempname.o wcwidth.o xmalloc.o libsupp_towlower.o libsupp_towupper.o libsupp_mblen.o libsupp_mbrtowc.o libsupp_mbsinit.o libsupp_mbtowc.o gl_LTLIBOBJS = argz.lo error.lo exitfail.lo getopt.lo getopt1.lo memmem.lo mempcpy.lo tempname.lo wcwidth.lo xmalloc.lo libsupp_towlower.lo libsupp_towupper.lo libsupp_mblen.lo libsupp_mbrtowc.lo libsupp_mbsinit.lo libsupp_mbtowc.lo gltests_LIBOBJS = gltests_LTLIBOBJS = host = i786-pc-msdosdjgpp host_alias = host_cpu = i786 host_os = msdosdjgpp host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = $(SHELL) ${top_srcdir}/build-aux/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /dev/env/DJDIR/bin/mkdir -p native_tools = oldincludedir = /usr/include pdfdir = ${docdir} prefix = /dev/env/DJDIR program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = .././../doc sysconfdir = ${prefix}/etc target_alias = top_build_prefix = ../ top_builddir = .. top_srcdir = .././.. # Put texinfo.txi first because that's the most important. info_TEXINFOS = texinfo.txi info-stnd.texi info.texi DISTCLEANFILES = texinfo texinfo-* info*.info* man_MANS = info.1 infokey.1 install-info.1 makeinfo.1 texindex.1 \ info.5 texinfo.5 texi2dvi.1 texi2pdf.1 pdftexi2dvi.1 # We'd also like to use something like this, but Automake calls # "install-info" directly. # INSTALL_INFO = $(top_builddir)/$(native_tools)/util/ginstall-info TXI_XLATE = txi-cs.tex txi-de.tex txi-en.tex txi-es.tex txi-fr.tex \ txi-it.tex txi-nl.tex txi-nb.tex txi-pl.tex txi-pt.tex \ txi-ru.tex txi-sr.tex txi-tr.tex txi-uk.tex refcard_files = refcard/Makefile refcard/txicmdcheck \ refcard/txirefcard-a4.pdf refcard/txirefcard.pdf \ refcard/txirefcard.tex # Include our texinfo.tex, not Automake's. EXTRA_DIST = epsf.tex texinfo.tex \ fdl.texi \ $(man_MANS) $(TXI_XLATE) texmf_texinfo = $(TEXMF)/tex/texinfo texmf_dvips = $(TEXMF)/tex/generic/epsf # The man pages depend on the --help strings and the version number. common_mandeps = $(top_srcdir)/configure.ac # Set up the variables: man_rule_0 = \ program=`expr '/$@' : '.*/\(.*\)\.1'` && \ case $$program in makeinfo) dir=makeinfo;; info*) dir=info;; \ *install-info) dir=install-info;; *) dir=util;; esac && \ dir="$(top_builddir)/$(native_tools)/$$dir" && \ case $$program in info|install-info) program=g$$program;; \ esac # Update the manpage for a binary program; set up the variables, # make sure the binary is up-to-date and then generate the man page. man_rule_bin = echo "Updating man page $@" && \ $(man_rule_0) && \ echo cd "$$dir" '&&' $(MAKE) $(AM_MAKEFLAGS) $$program$(EXEEXT) && \ (cd "$$dir" && $(MAKE) $(AM_MAKEFLAGS) $$program$(EXEEXT)) && \ echo $(HELP2MAN) --name=\""$$name"\" "$$dir/$$program" -o '$@' && \ $(HELP2MAN) --name="$$name" "$$dir/$$program" -o '$@' util_srcdir = $(top_srcdir)/util # Do not depend on the current user's settings. # We need to include util_srcdir in PATH so texi2pdf can find texi2dvi. change_envvars = unset TEXI2DVI_BUILD_MODE; unset TEXI2DVI_BUILD_DIRECTORY; \ PATH="$(util_srcdir):$${PATH}"; export PATH common_texi2dvi_deps = $(common_mandeps) \ $(util_srcdir)/texi2dvi $(util_srcdir)/texi2pdf all: all-am .SUFFIXES: .SUFFIXES: .dvi .ps $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh texinfo: texinfo.txi $(srcdir)/version.texi restore=: && backupdir="$(am__leading_dot)am$$$$" && \ rm -rf $$backupdir && mkdir $$backupdir && \ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi; \ then \ rc=0; \ else \ rc=$$?; \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc texinfo.dvi: texinfo.txi $(srcdir)/version.texi TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi texinfo.pdf: texinfo.txi $(srcdir)/version.texi TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi texinfo.html: texinfo.txi $(srcdir)/version.texi rm -rf $(@:.html=.htp) if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi; \ then \ rm -rf $@; \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ else \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ exit 1; \ fi $(srcdir)/version.texi: # $(srcdir)/stamp-vti $(srcdir)/stamp-vti: texinfo.txi $(top_srcdir)/configure @(dir=.; test -f ./texinfo.txi || dir=$(srcdir); \ set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/texinfo.txi`; \ echo "@set UPDATED $$1 $$2 $$3"; \ echo "@set UPDATED-MONTH $$2 $$3"; \ echo "@set EDITION $(VERSION)"; \ echo "@set VERSION $(VERSION)") > vti.tmp @cmp -s vti.tmp $(srcdir)/version.texi \ || (echo "Updating $(srcdir)/version.texi"; \ cp vti.tmp $(srcdir)/version.texi) -@rm -f vti.tmp @cp $(srcdir)/version.texi $@ mostlyclean-vti: -rm -f vti.tmp maintainer-clean-vti: # -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi info-stnd.info: info-stnd.texi $(srcdir)/version-stnd.texi restore=: && backupdir="$(am__leading_dot)am$$$$" && \ rm -rf $$backupdir && mkdir $$backupdir && \ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi; \ then \ rc=0; \ else \ rc=$$?; \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc info-stnd.dvi: info-stnd.texi $(srcdir)/version-stnd.texi TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi info-stnd.pdf: info-stnd.texi $(srcdir)/version-stnd.texi TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi info-stnd.html: info-stnd.texi $(srcdir)/version-stnd.texi rm -rf $(@:.html=.htp) if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi; \ then \ rm -rf $@; \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ else \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ exit 1; \ fi $(srcdir)/version-stnd.texi: # $(srcdir)/stamp-1 $(srcdir)/stamp-1: info-stnd.texi $(top_srcdir)/configure @(dir=.; test -f ./info-stnd.texi || dir=$(srcdir); \ set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/info-stnd.texi`; \ echo "@set UPDATED $$1 $$2 $$3"; \ echo "@set UPDATED-MONTH $$2 $$3"; \ echo "@set EDITION $(VERSION)"; \ echo "@set VERSION $(VERSION)") > 1.tmp @cmp -s 1.tmp $(srcdir)/version-stnd.texi \ || (echo "Updating $(srcdir)/version-stnd.texi"; \ cp 1.tmp $(srcdir)/version-stnd.texi) -@rm -f 1.tmp @cp $(srcdir)/version-stnd.texi $@ mostlyclean-1: -rm -f 1.tmp maintainer-clean-1: # -rm -f $(srcdir)/stamp-1 $(srcdir)/version-stnd.texi info.info: info.texi $(info_TEXINFOS) restore=: && backupdir="$(am__leading_dot)am$$$$" && \ rm -rf $$backupdir && mkdir $$backupdir && \ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi; \ then \ rc=0; \ else \ rc=$$?; \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc info.dvi: info.texi $(info_TEXINFOS) TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi info.pdf: info.texi $(info_TEXINFOS) TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi info.html: info.texi $(info_TEXINFOS) rm -rf $(@:.html=.htp) if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) `test -f 'info.texi' || echo '$(srcdir)/'`info.texi; \ then \ rm -rf $@; \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ else \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ exit 1; \ fi .dvi.ps: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ $(DVIPS) -o $@ $< uninstall-dvi-am: @$(NORMAL_UNINSTALL) @list='$(DVIS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ rm -f "$(DESTDIR)$(dvidir)/$$f"; \ done uninstall-html-am: @$(NORMAL_UNINSTALL) @list='$(HTMLS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ done uninstall-info-am: @$(PRE_UNINSTALL) @if test -d '$(DESTDIR)$(infodir)' && \ (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS) texinf- texin- info-stn.i info.inf'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done uninstall-pdf-am: @$(NORMAL_UNINSTALL) @list='$(PDFS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ done uninstall-ps-am: @$(NORMAL_UNINSTALL) @list='$(PSS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ rm -f "$(DESTDIR)$(psdir)/$$f"; \ done mostlyclean-aminfo: -rm -rf texinfo.aux texinfo.cp texinfo.cps texinfo.fn texinfo.fns texinfo.ky \ texinfo.kys texinfo.log texinfo.op texinfo.pg texinfo.tmp \ texinfo.toc texinfo.tp texinfo.tps texinfo.vr texinfo.dvi \ texinfo.pdf texinfo.ps texinfo.html info-stnd.aux \ info-stnd.cp info-stnd.cps info-stnd.fn info-stnd.ky \ info-stnd.log info-stnd.pg info-stnd.pgs info-stnd.tmp \ info-stnd.toc info-stnd.tp info-stnd.tps info-stnd.vr \ info-stnd.dvi info-stnd.pdf info-stnd.ps info-stnd.html \ info.aux info.cp info.cps info.fn info.ky info.log info.pg \ info.pgs info.tmp info.toc info.tp info.tps info.vr info.dvi \ info.pdf info.ps info.html maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ done install-man5: $(man5_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)" @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.5*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 5*) ;; \ *) ext='5' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \ done uninstall-man5: @$(NORMAL_UNINSTALL) @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.5*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 5*) ;; \ *) ext='5' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man5dir)/$$inst"; \ done tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-info check-am: all-am check: check-am all-am: Makefile $(INFO_DEPS) $(MANS) installdirs: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." #install-data-local: clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: $(DVIS) html: html-am html-am: $(HTMLS) info: info-am info-am: $(INFO_DEPS) install-data-am: install-data-local install-info-am install-man install-dvi: install-dvi-am install-dvi-am: $(DVIS) @$(NORMAL_INSTALL) test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)" @list='$(DVIS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \ done install-exec-am: install-html: install-html-am install-html-am: $(HTMLS) @$(NORMAL_INSTALL) test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)" @list='$(HTMLS)'; for p in $$list; do \ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ if test -d "$$d$$p"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \ else \ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ fi; \ done install-info: install-info-am install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)" @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ else : ; fi; \ done; \ done @$(POST_INSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: install-man1 install-man5 install-pdf: install-pdf-am install-pdf-am: $(PDFS) @$(NORMAL_INSTALL) test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)" @list='$(PDFS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \ done install-ps: install-ps-am install-ps-am: $(PSS) @$(NORMAL_INSTALL) test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)" @list='$(PSS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \ done installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-1 \ maintainer-clean-aminfo maintainer-clean-generic \ maintainer-clean-vti mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-1 mostlyclean-aminfo mostlyclean-generic \ mostlyclean-vti pdf: pdf-am pdf-am: $(PDFS) ps: ps-am ps-am: $(PSS) uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ uninstall-man uninstall-pdf-am uninstall-ps-am uninstall-man: uninstall-man1 uninstall-man5 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic dist-info \ distclean distclean-generic distdir dvi dvi-am html html-am \ info info-am install install-am install-data install-data-am \ install-data-local install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-man1 install-man5 \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-1 maintainer-clean-aminfo \ maintainer-clean-generic maintainer-clean-vti mostlyclean \ mostlyclean-1 mostlyclean-aminfo mostlyclean-generic \ mostlyclean-vti pdf pdf-am ps ps-am uninstall uninstall-am \ uninstall-dvi-am uninstall-html-am uninstall-info-am \ uninstall-man uninstall-man1 uninstall-man5 uninstall-pdf-am \ uninstall-ps-am $(refcard_files) install-data-local: @echo @echo "WARNING: If your texmf tree does not already contain" @echo " up-to-date versions, you must install" @echo " texinfo.tex and txi-??.tex manually," @echo " perhaps in TEXMF/tex/texinfo/," @echo " where TEXMF is a root of your TeX tree." @echo " See doc/README for some considerations." @echo " You can run make TEXMF=/your/texmf install-tex to do this." @echo @echo " You may also need to install epsf.tex in" @echo " TEXMF/tex/generic/dvips, if your TeX" @echo " installation did not include it." install-tex: test -n "$(TEXMF)" || (echo "TEXMF must be set." >&2; exit 1) $(mkinstalldirs) $(DESTDIR)$(texmf_texinfo) $(DESTDIR)$(texmf_dvips) $(INSTALL_DATA) $(srcdir)/texinfo.tex $(DESTDIR)$(texmf_texinfo)/texinfo.tex $(INSTALL_DATA) $(srcdir)/epsf.tex $(DESTDIR)$(texmf_dvips)/epsf.tex for f in $(TXI_XLATE); do \ $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(texmf_texinfo)/$$f; done $(srcdir)/info.1: $(top_srcdir)/info/info.c $(common_mandeps) @name="read Info documents" && $(man_rule_bin) $(srcdir)/infokey.1: $(top_srcdir)/info/infokey.c $(common_mandeps) @name="compile customizations for Info" && $(man_rule_bin) $(srcdir)/install-info.1: $(top_srcdir)/install-info/install-info.c $(common_mandeps) @name="update info/dir entries" && $(man_rule_bin) # Here we need some postprocessing: $(srcdir)/makeinfo.1: $(top_srcdir)/makeinfo/makeinfo.c $(common_mandeps) @name="translate Texinfo documents" && $(man_rule_bin) mv $@ $@.tmp sed '/^\.IP$$/N;/\nAlso/s/I//;/\nThe/s/I//' $@.tmp >$@ rm $@.tmp $(srcdir)/texindex.1: $(util_srcdir)/texindex.c $(common_mandeps) @name="sort Texinfo index files" && $(man_rule_bin) $(srcdir)/texi2dvi.1: $(common_texi2dvi_deps) $(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to DVI" $(util_srcdir)/texi2dvi >$@ $(srcdir)/texi2pdf.1: $(common_texi2dvi_deps) $(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to PDF" $(util_srcdir)/texi2pdf >$@ $(srcdir)/pdftexi2dvi.1: $(common_texi2dvi_deps) $(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to PDF" $(util_srcdir)/pdftexi2dvi >$@ # Do not create info files for distribution. dist-info: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: