/**
 ** pblit_nb.h ---- bitblt routine for packed (8,16,24,32 bpp) modes
 **                 (non banking, source and destination may overlap)
 **
 ** Copyright (c) 1995 Csaba Biegl, 820 Stirrup Dr, Nashville, TN 37221
 ** [e-mail: csaba@vuse.vanderbilt.edu].
 **
 ** This file is part of the GRX graphics library.
 **
 ** The GRX graphics library is free software; you can redistribute it
 ** and/or modify it under some conditions; see the "copying.grx" file
 ** for details.
 **
 ** This library is distributed in the hope that it will be useful,
 ** but WITHOUT ANY WARRANTY; without even the implied warranty of
 ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** Contributions by: (See "doc/credits.doc" for details)
 ** Hartmut Schirmer (hsc@techfak.uni-kiel.de)
 ** Andrzej Lawa [FidoNet: Andrzej Lawa 2:480/19.77]
 **
 **/

#include "libgrx.h"
#include "grdriver.h"
#include "arith.h"
#include "mempeek.h"

#include "pblit.h"

/* WRITE_FAR should be defined as _f if destination is video */
/* READ_FAR should be defined as _f if source is video */

#define __DOCPYF(WF,OP,RF)  fwdcopy##WF##OP##RF(dptr,dptr,sptr,ww)
#define __DOCPYR(WF,OP,RF)  revcopy##WF##OP##RF(dptr,dptr,sptr,ww)

#define __DOIMGCPYF(WF,RF)  DOIMGCOPY(FW,WF,RF,ww)
#define __DOIMGCPYR(WF,RF)  DOIMGCOPY(RV,WF,RF,ww)

/* indirection to resolve WF=WRITE_FAR / RF=READ_FAR macros */
#define DOCPYF(WF,OP,RF)  __DOCPYF(WF,OP,RF)
#define DOCPYR(WF,OP,RF)  __DOCPYR(WF,OP,RF)
#define DOIMGCPYF(WF,RF)  __DOIMGCPYF(WF,RF)
#define DOIMGCPYR(WF,RF)  __DOIMGCPYR(WF,RF)

/* check if forward blit would overwrite source */
#ifdef BLIT_CAN_OVERLAP
#ifndef OVERLAP
#define OVERLAP(dp,sp) ( ((GR_int8 *)dp) > ((GR_int8 *)sp) )
#endif
#endif

/* for RAM3x8 support */
#ifndef PLANE_ARG
#define PLANE 0
#endif

#ifdef LOCALFUNC
static
#endif
void BLITFUNC(GrFrame *dst,int dx,int dy,
	      GrFrame *src,int sx,int sy,
	      int w,int h,GrColor op
#ifdef PLANE_ARG
	     ,int PLANE
#endif
	      )
{
    char *dptr, *sptr;
    unsigned  dskip, sskip;
    int       oper, ww;
    GR_int8u  cval;

    GRX_ENTER();
    dskip = dst->gf_lineoffset - w;
    sskip = src->gf_lineoffset - w;
    oper  = C_OPER(op);
    cval  = (GR_int8u)op;

    dptr = &dst->gf_baseaddr[PLANE][umuladd32(dy,dst->gf_lineoffset,dx)];
    sptr = &src->gf_baseaddr[PLANE][umuladd32(sy,src->gf_lineoffset,sx)];

#   ifdef BLITSEL
      setup_far_selector(BLITSEL);
#   endif

#   ifdef BLIT_CAN_OVERLAP
    if(OVERLAP(dptr,sptr)) {
	dptr += umuladd32((h-1),dst->gf_lineoffset,w-1);
	sptr += umuladd32((h-1),src->gf_lineoffset,w-1);
	do {
	    ww = w;
	    switch(oper) {
		case C_IMAGE: DOIMGCPYR(WRITE_FAR,READ_FAR);    break;
		case C_XOR:   DOCPYR(WRITE_FAR,_xor,READ_FAR);  break;
		case C_OR:    DOCPYR(WRITE_FAR,_or,READ_FAR);   break;
		case C_AND:   DOCPYR(WRITE_FAR,_and,READ_FAR);  break;
		default:      DOCPYR(WRITE_FAR,_set,READ_FAR);  break;
	    }
	    dptr -= dskip;
	    sptr -= sskip;
	} while(--h != 0);
    } else
#endif /* BLIT_CAN_OVERLAP */
      do {
	ww = w;
	switch(oper) {
	    case C_IMAGE: DOIMGCPYF(WRITE_FAR,READ_FAR);      break;
	    case C_XOR:   DOCPYF(WRITE_FAR,_xor,READ_FAR);    break;
	    case C_OR:    DOCPYF(WRITE_FAR,_or,READ_FAR);     break;
	    case C_AND:   DOCPYF(WRITE_FAR,_and,READ_FAR);    break;
	    default:      DOCPYF(WRITE_FAR,_set,READ_FAR);    break;
	}
	dptr += dskip;
	sptr += sskip;
      } while(--h != 0);
    GRX_LEAVE();
}

#undef __DOCPYF
#undef __DOCPYR
#undef DOCPYF
#undef DOCPYR